813402

Gazco Riva Nemos Coprecci Manual

5
Zoom out
Zoom in
Previous page
1/34
Next page
5
USER INSTRUCTIONS
1
AR2516a
On/Off
Button
Up
Button
Down
Button
2.1 To light the appliance using the remote handset press the
On/Off (�) button followed directly by the OK button. The
appliance will emit a beep to confirm the order has been
received and the LED on the handset will briefly illuminate.
After the start up cycle has completed the appliance will
light on the high flame setting (this can take up to 20
seconds).
To decrease the flame height:
2.2 From the high flame setting press the DOWN () button
once to lower the flame to the medium setting.
Each time a command from the handset is received by
the appliance a beep will be emitted and the LED on the
handset will briefly illuminate.
NOTE: In normal operating mode the LED on the remote
control will flash approximately every 4 seconds to show
that it is in communication with the appliance. After each
command has been accepted the LED will cease flashing
until the command has been carried out. Wait until the
LED resumes flashing before giving another command.
2.3 From the medium flame setting press the DOWN ()
button once to lower the flame to the low setting.
2.4 From the low flame setting press the DOWN () button
once to put the appliance in Standby mode (Pilot only).
To increase the flame height:
2.5 To light the appliance when it is in Standby mode press the
UP () button once. The appliance will light on the high
flame setting.
2.6 From the low setting press the UP () button once to
increase the flame setting to medium.
2.7 From the medium setting press the UP () button once to
increase the flame setting to high.
BATTERIES
2.8 The remote handset contains 2 x AA 1.5v alkaline batteries.
Replace exhausted batteries like for like (use high quality
batteries, Duracell or similar). DO NOT USE
RECHARGEABLE BATTERIES.
2.9 Communication between the handset and the appliance
may take up to 2 mins after batteries have been replaced.
2.10 If communication is not regained after this time the control
unit and the handset may need pairing. Please refer to
Commissioning, Section 2, Pairing Handset on page 21.
2B. OPERATING THE APPLIANCE TOUCH
PAD CONTROL
TOUCH PAD CONTROL
The touch pad control is located at the base of the front of
the appliance (see Diagram 2).
2
AR2704a
2.8 To light the appliance press the On/Off button once. The
appliance will emit a beep to confirm the order has been
received and the LED on the touch pad will briefly
illuminate.
After the start up cycle has completed the appliance will
light on the high flame setting (this can take up to 20
seconds). A second beep and flash of the touch pad LED
will confirm the command has been carried out.
To decrease the flame height:
2.9 From the high flame setting press the DOWN () button
once to lower the flame to the medium setting.
Each time a command from the touch pad is received by
the appliance a beep will be emitted and the LED on the
touch pad will briefly illuminate. A second beep and
flash of the touch pad LED will confirm the command
has been carried out. Wait for this confirmation before
giving another command.
2.10 From the medium flame setting press the DOWN ()
button once to lower the flame to the low setting.
2.11 From the low flame setting press the DOWN () button
once to put the appliance in Standby mode (Pilot only).
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva Nemos Coprecci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva Nemos Coprecci in the language / languages: English as an attachment in your email.

The manual is 3.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info