813402

Gazco Riva Nemos Coprecci Manual

7
Zoom out
Zoom in
Previous page
1/34
Next page
7
USER INSTRUCTIONS
5.4 Remove the ceramic logs and place on a dry, clean surface.
It is not essential to remove the embers.
5.5 The logs should not require cleaning. Do not use a vacuum
cleaner or brush to clean the logs, any large pieces of debris
may be removed by hand.
5.6 Ensure any debris is removed from the burner ports.
5.7 Replace the ceramics and door by referring to Section 6.
5.8 To clean the glass surface, Gazco recommends you use a
ceramic glass product generally sold for cleaning ceramic
hobs.
6. ARRANGEMENT OF FUEL BED
COMPONENTS
ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICS
The fuel effect and side panels in this appliance are made
from Refractory Ceramic Fibre (RCF), a material which is
commonly used for this application.
Protective clothing is not required when handling these
articles, but we recommend you follow normal hygiene
rules of not smoking, eating or drinking in the work area
and always wash your hands before eating or drinking.
To ensure that the release of RCF fibres are kept to a
minimum, during installation and servicing a HEPA filtered
vacuum is recommended to remove any dust accumulated
in and around the appliance before and after working on it.
When servicing the appliance it is recommended that the
replaced items are not broken up, but are sealed within
heavy duty polythene bags and labelled as RCF waste.
RCF waste is classed as stable, non-reactive hazardous waste
and may be disposed of at a licensed landfill site.
Excessive exposure to these materials may cause temporary
irritation to eyes, skin and respiratory tract; wash hands
thoroughly after handling the material.
6.1 Place log A on to the burner. Ensure the rear of the log
touches the rear of the burner (see Diagram 7).
AR0816
7
CENTRALISE THE LOG BETWEEN THE BURNER PORTS
AT EITHER END
Four of the remaining logs have location holes on the
underside. These locate on the studs at the front of the fire.
6.2 Place log D on the third stud from the left and resting at the
rear of log A (see Diagram 8).
8
AR1194
6.3 Place log C on the second stud and resting at the rear on
log A (see Diagram 9).
9
AR1195
6.4 Place log B on the first stud. The recess on the underside of
the log should locate on the top of log C (see Diagram 10).
10
AR1196
6.5 Place log E on to the last stud. The recess on the underside
of the log should locate on to the top of log D (see Diagram
11).
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva Nemos Coprecci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva Nemos Coprecci in the language / languages: English as an attachment in your email.

The manual is 3.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info