813405
13
Zoom out
Zoom in
Previous page
1/40
Next page
13
INSTALLATION INSTRUCTIONS
SITE REQUIREMENTS
1. FLUE AND CHIMNEY REQUIREMENTS
CONVENTIONAL FLUE
WHEN INSTALLING A FLUE SYSTEM PLEASE REFER TO
THE MANUFACTURERS INSTRUCTIONS.
Due to the recent changes to European chimney standards,
new flue’s and chimney’s are now described by their
temperature, pressure and resistance to corrosion,
condensation and fire. To assist in identifying the correct
flue system, the minimum flue specification is shown in the
Technical Specification. Existing chimneys are not covered
by this system.
1.1 The chimney or flue system must comply with the rules in
force, and must be 127mm (5") in diameter. A suitable
system is single or twin wall rigid flue pipe.
A suitable system is the Single or twin wall rigid flue pipe
1.2 The minimum effective height of the flue must be 3 metres
(10ft).
1.3 The flue must be free from any obstruction.
Any damper plates should be removed or secured in the
fully open position and no restrictor plates should be fitted.
2. FLUE AND CHIMNEY REQUIREMENTS
BALANCED FLUE
NOTE: This appliance can only be installed in conjunction
with the flue supplied.
2.1 The flue must be sited in accordance with BS5440: Part 1
(latest edition) (see Diagram 1).
2.2 Any terminal which is less than 2 metres above any access
(level ground, balcony or above a flat roof to which people
have access) is to be fitted with a guard.
2.3 All vertical and horizontal flues must be securely fixed and
fire precautions followed in accordance with local and
national codes of practice.
2.4 A restrictor may be required. Refer to Technical
Specifications on page 10.
2.5 Two types of flue terminals are available, horizontal and
vertical. For a horizontal terminal, decide on the terminal
position and measure the height from the top of the
appliance to the centre of the required hole. For minimum
and maximum flue dimensions see Diagram 1A / 1B.
1
BALANCED FLUE
UK REGULATIONS
AR0602
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva F67 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva F67 in the language / languages: English as an attachment in your email.

The manual is 4.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info