813483
40
Zoom out
Zoom in
Previous page
1/52
Next page
40
Pilot Burner Bracket
6.3 Remove the two fixing screws from the pilot bracket, see
Diagram 23. Gently draw the assemble away from the
firebox to give access to the nuts and ignition lead.
NOTE: TAKE CARE NOT TO DAMAGE THE GASKET.
23
Nat Gas
Huntingon 30 ONLY
LPG
Pilot Injector
6.4 Undo the compression nut on the pilot feed pipe and
withdraw the injector which will be hooked onto the olive.
When replacing an injector always make sure it is hooked
onto the olive before inserting it into the pilot burner, see
Diagram 24.
24
Electrode
6.5 Disconnect the ignition lead and undo the retaining nut. The
electrode can now be removed, note the orientation of the
electrode terminal when reassembling, see Diagram 25.
25
Thermocouple
6.6 Undo the retaining nut and withdraw the thermocouple. Undo
the thermocouple from the back of the gas valve, see
Diagram 26. Reassemble in reverse order. Do not
overtighten.
26
Gasket
6.7 Disconnect all the above components and withdraw the
gasket. If it is damaged, replace with a new item. Always
replace the gasket first when reassembling the pilot
components.
Huntingdon 40 Only
The pilot assembly consists of 4 components which can be
individually changed:
Pilot burner bracket
Electrode
Pilot injector
Thermocouple
27 Electrode
Thermocouple Pilot Injector
Pilot Burner
Bracket
Ignition Lead
Pilot Pipe
Screw Screw
NOTE: Ensure the sealant surrounding the Electrode
and Thermocouple leads is replaced if disturbed or
removed whilst gaining access to these components.
6.8 Turn the gas supply off at the isolation device, remove the
door and place to one side, carefully remove the ceramic fuel
bed components.
Servicing Instructions - Replacing Parts
Huntingdon 30 shown
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Huntingdon 20-30-40 - Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Huntingdon 20-30-40 - Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 3.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info