813472
21
Zoom out
Zoom in
Previous page
1/32
Next page
21
6.5 Place log D across from the rear log A to log B on the left-
hand side. There are cut-outs in both logs for location,
see Diagram 14.
14
6.6 There are 2 ash panels which lay across the front of the
burner skin. Place the panel with the flat edge facing the left
side of the firebox. There are location holes on this log
which fit over the screw holes of the burner skin.
15
6.7 Place the second ash panel to the right of the first, with the
pointed end of the panel fitting into the V shape. This panel
should locate on the screw holes of the burner skin. Ensure
that both logs are horizontal to the burner ports.
16
Installation Instructions
6.8 Place log E across from the rear of log A to log C on the
right hand side. Again, there are cut-outs for location. The
front of the log should sit on the front ash panels and should
fit tight to log C, see Diagram 17.
17
6.9 Carefully insert the log guard into the front panel of the
firebox. Take care not the scrape/damage the logs. This log
guard sits in 2 brackets. Ensure it is fully inserted, leaving
approximately a 4 mm gap between the firebox ledge and
the bottom of the log guard.
18
6.10 Ensure that the rope seal on the back of the door is intact,
locate the door on the 4 studs and slide back to the firebox.
Secure in place using the 4 dome nuts and tool supplied. Do
not over tighten the nuts, see Diagram 19.
19
NEVER OPERATE THE APPLIANCE WHEN THE DOOR
IS REMOVED, OR THE GLASS IS BROKEN.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Clarendon - Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Clarendon - Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 2.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info