813361
19
Zoom out
Zoom in
Previous page
1/23
Next page
SERVICING INSTRUCTIONS
REPLACING PARTS
4. IGNITION LEAD AND PIEZO
4.1 Gain access to the back of the pilot assembly, (see section
2) and disconnect the ignition lead from the electrode.
4.2 Remove the front cover from the control valve, (see
Diagrams 10 and 11). Disconnect the other end of the
ignition lead from the valve body. Note the existing route of
the ignition lead.
10
AR0915
AR0916
11
4.3 Replace with a new ignition lead following the same route
as the old one. Replace the valve cover and the pilot
assembly.
4.4 Check operation of the new ignition lead.
5.PIEZO
5.1 The piezo assembly used on this appliance is not
serviceable and is unlikely to fail.
5.2 If a new piezo is required it will be necessary to change the
gas valve. Refer to Section 6.
19
6. GAS VALVE
6.1 Turn the gas supply off at the isolation device.
6.2 Disconnect the 2x8mm and 1x4mm gas pipe fittings at the
back of the gas valve and also disconnect the thermocouple,
see Diagram 12.
12
AR0943
6.3 Undo the single screw that secures the left-hand side of the
control cover, see Diagram 13.
AR0915
13
6.4 To release the right-hand side of the control cover, insert
the narrow blade screwdriver into the slot shown in
Diagram 11. Lever it gently and pull from the right-hand
side at the same time. The cover will now come off. There
is a small cylindrical metal spacer inside the cover. This
must be kept and replaced on the fixing screw during
re-assembly.
14
AR0916
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Ceramica Manhattan 8578-P8578 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Ceramica Manhattan 8578-P8578 in the language / languages: English as an attachment in your email.

The manual is 2.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info