813361
17
Zoom out
Zoom in
Previous page
1/23
Next page
17
3
AR0488
2. BURNER UNIT REMOVAL
2.1 Turn the gas supply off at the isolation device. Ensure the
unit is cool.
Use cover material to front of appliance to protect
paintwork etc.
Remove the door and place to one side. (4 nuts).
Carefully remove the ceramic fuel components to a safe
place.
Remove front cover-plate (2 screws).
Remove cover plate fixing bracket (2 wing nuts).
(Small Stoves only)
Unscrew pilot union nut on gas valve. See Diagram 4.
AR0391
Viewing slot on Marlborough only
4
2.2 Disconnect thermocouple from gas valve. See Diagram 2.
Remove ignition lead from electrode. (Cut cable tie to
ignition lead if required).
1. GENERAL
1.1 All principal components can be replaced without removing
the stove from its installation, although it will be necessary
to remove the door and ceramic outer casing in order to
access most components. In order to remove the casing, use
the following procedure:
1.2 Remove the door retaining nuts using the tool provided and
place the door to one side.
1.3 Carefully remove the top blanking plate and grille and place
to one side, gently remove the top ceramic panel, see
Diagram 1. If the unit has been connected to a top exit flue,
it will be necessary to lift and support the grille and top
ceramic panel whilst removing the outer ceramic
components.
1
AR0492
1.4 Gently lift the front ceramic panel, and pull away from the
sub-frame to clear the retaining bolts, see Diagram 2.
2
AR0490
1.5 Carefully remove the two side panels by lifting, and gently
pulling clear of the retaining bolts, see Diagram 3. It may
not be necessary to remove both of the side panels.
This should allow full access to all major components.
SERVICING INSTRUCTIONS
REPLACING PARTS
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Ceramica Manhattan 8578-P8578 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Ceramica Manhattan 8578-P8578 in the language / languages: English as an attachment in your email.

The manual is 2.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info