813468
5
Zoom out
Zoom in
Previous page
1/28
Next page
5
Thermostatic Control
2.21 The appliance is fitted with a thermostat, see Diagram 1,
which can control the room temperature between
approximately 9˚C and 34˚C. The edge of the thermostat
control dial is numbered 1 - 9 with 1 being the coolest
setting and 9 being the warmest. If the room temperature is
too high turn the thermostat dial in an anti-clockwise
direction. If the room temperature is too low turn the dial in a
clockwise direction.
Log Effect
2.22 Log effect appliances have a glass fibre fuel bed which
may give off a slight smell when first used. This is
normal and should disappear after a day or two.
Thermal Safety Cutout
The appliance is fitted with a thermal safety cutout,
which operates if it overheats. If this happens:
2.23 Unplug the appliance and allow it to cool for 5 - 10
minutes.
2.24 Check the air inlets/outlets for any obstruction and clear, see
Maintenance, Section 3.4.
2.25 Plug in appliance and switch it on. The cutout will re-set
and the appliance should function correctly. If this is not
the case:
2.26 Unplug once more and have the fire checked by a
competent electrician.
3. Maintenance
3.1 ALWAYS UNPLUG FROM MAINS SUPPLY BEFORE
CLEANING OR UNDERTAKING ANY MAINTENANCE.
CLEANING
3.2 Only clean the outer casing when it is cold. Do not use
abrasive cleaners.
3.3 For painted castings, wipe with a damp cloth and buff
with a lint free duster.
CLEANING AIR INLETS
3.4 Ensure the appliance is unplugged.
3.5 Clean the air inlet and outlet grilles regularly with a soft
cloth or the nozzle of a vacuum cleaner.
Dust build-up can inhibit efficient performance of the
fan and lead to the safety cut-out operating.
3.6 Keep the area around the stove clean and free of fluff, dust
or pet hair.
3.7 In particular, build-up of dust etc. can occur around the
heater area under the appliance. Take particular care to
keep this area free from such particles on a regular basis
to prevent build-up.
CLEANING LOG MOULDING
3.8 Ensure the appliance is unplugged and cold before handling
log moulding.
3.9 Follow Section 4, choosing relevant model, to access and
remove log moulding.
3.10 Dust off any build-up with a brush or damp cloth and
replace.
4. Removing & Replacing Doors and
Removal of Fuel Bed
WARNING: DOOR CASTINGS ARE EXTREMELY
HEAVY - SEEK ASSISTANCE BEFORE REMOVAL.
Please note: The fuel bed is secured by 2 x screws on
the lower panel on the front of the stove.
Screws
Fuel bed
3
Take care not to damage the plastic screen when
replacing the fuel bed.
4.1 Small or Medium Marlborough
Small or Medium Stockton
Medium Ashdon
4.1.1 Remove nuts from door facia holding the door before
removing final nut, see Diagram 4a.
4a
4.1.2 Remove the screws on the lower panel on the front of the
appliance and carefully remove the fuel bed, see
Diagram 3.
User Instructions
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Ashdon - Electric at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Ashdon - Electric in the language / languages: English as an attachment in your email.

The manual is 4.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gazco Ashdon - Electric

Gazco Ashdon - Electric User Manual - Dutch - 20 pages

Gazco Ashdon - Electric User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info