714635
75
Zoom out
Zoom in
Previous page
1/88
Next page
75
9. For setting the grilling time: press the clock button on the control area. The def-
ault grilling time is flashing in the display area. While the grilling time is flashing,
touch the buttons “+” and “–” to set the desired value.
10. For changing the currently displayed grilling time: press the clock button on
the control area. The current grilling time is flashing on the display area. While
the grilling time is flashing, touch the buttons “+” and “–” to set the desired value.
CONTROLLING THE CORE TEMPERATURE
CAUTION: Do not place the temperature probe on the grilling surfaces.
When the temperature probe is not in use, place it beside the appliance.
When the temperature probe is connected to the appliance (see: ‘Preparations’),
you can monitor the core temperature of your food automatically during cooking,
by activating the temperature control (see: ‘Temperature Probe’). As soon as the set
core temperature is reached, a signal sounds.
Tip: The set core temperature can be given in *F as well. Press the unit button “°C
/ °F” for changing the temperature unit (see: ‘Knowing Your New Contact Grill’).
1. Ensure that the plug of the temperature probe is inserted in the probe connector
(see: ‘Preparations’).
2. On the upper left side of the display area, touch the probe button. This will
activate the temperature control function and “PROBE TEMP’ illuminates. On
the upper right side of the display area, the set core temperature is flashing for
some 5 seconds and then illuminated continuously (see: ‘Temperature Probe’).
Note
With “Er3” flashing on the display area, the temperature probe is not connected
correctly or out of order. Ensure that the probe plug is inserted correctly in the pro-
be connector. Turn the probe plug a little to and fro to ensure good contact. The
error message “Er3” disappears immediately, if the temperature probe is in cor-
rect working order. If the error message persists, the temperature probe may be
damaged or the probe plug may be polluted. In this case, the appliance will not
work, while the temperature probe function is activated. Touch the probe button
for operating the appliance without temperature control.
3. As long as the set core temperature flashes on the display area (immediately
after activating the temperature control), you can adjust the desired temperature
via the “+” and “–” buttons on the control area. In general, the following values
are possible: 45, 50, 55, 60, 65, 75°C (see: ‘Temperature Probe’).
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42539 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42539 in the language / languages: English, German as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info