714654
107
Zoom out
Zoom in
Previous page
1/120
Next page
EN
107
Problem Reason The Solution
You cannot start the
desired program.
The appliance is not live. Check, whether the power outlet is live.
The kettle is not placed on
the power base correctly.
“E3” is displayed.
Fill the kettle with at least 0.5 litres of water and place
the kettle on the power base. If required, turn the kettle
on the power base. Then try again.
The set temperature is
lower than or equal to the
current water temperature
within the kettle. “E1” is
displayed.
The set temperature must be higher than the current tem-
perature within the kettle to start a program. Wait until
the kettle cooled down sufficiently, select a somewhat
higher temperature, or carefully and slowly pour some
cold water into the centre of the kettle (see: ‘Operation
/ Adding Water during Operation’).
The boil dry protection has
been triggered. “E2” is
shown on the display.
Unplug the appliance, empty the kettle, and leave the
kettle cool down for at least 30 minutes (see: ‘Properties
of Your New Tea Maker / Boil Dry Protection’). There-
after, fill the kettle with at least 0.5 litres (500ml) of
cold water and try again.
Water accumulates under
the power base or runs
down on the exterior of
the kettle.
Immediately unplug
the appliance and wipe
dry the appliance com-
pletely.
There is too much water
in the kettle. At the spout,
the water is boiling out of
the kettle.
Leave the appliance dry naturally for at least 1 day.
Always observe the maximum filling level when filling
(see: ‘Technical Specifications’).
You spilled some water
during filling or moving
the kettle.
Ensure not to spill water on the exterior of the kettle duri-
ng filling. Always ensure to hold the kettle level, when
it is filled.
The kettle is not closed
correctly during operation.
Boiling water is splashing.
Always ensure to close the kettle correctly via the lid ring
and filter system or lid, before starting a program.
The kettle is leaking. Check the kettle for leakage. For this, place the filled
kettle on a dry surface for some hours. Do not use the
appliance, when the kettle is leaking. If required, contact
your vendor.
The water has an
unpleasant taste.
This may happen on new
appliances or appliances
that are used only rarely.
Prepare the appliance for usage as described in chapter
‘Before First Use’. If the problem persists, fill the kettle
with 1500ml of water and add two teaspoons of baking
soda. Select 100°C and press the WATER button. Leave
the appliance operate until automatic shut-off (see: ‘Ope-
ration / Heating Clear Water’). Then discard the water
and clean the kettle thoroughly.
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42440 in the language / languages: English, German as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info