Manual Gastroback 42440 (page 101 of 120) (English, German)

714654

101

Zoom out

Zoom in

1/120

101

You start the WATER function via the WATER button. This function does not perform

any steeping cycle. You can set up the desired temperature before starting the func-

tion. When the set temperature is reached, the appliance switches to the keep warm

function at once (see: ‘Properties of Your New Tea Maker / Keep Warm Function’).

For avoiding high energy loss and surplus evaporation of water, the maximum tem-

perature of the keep warm function is limited to 90°C (194°F).

IMPORTANT - The keep warm function keeps running, even if the kettle has been

removed from the power base intermediately. You need to press the illuminated

start/stop button (in this case the WATER button) for cancelling the keep warm

function.

1. Without the filter system, prepare the appliance for operation (see: ‘Preparing

the Appliance for Operation’). This means: the kettle is closed by the lid.

IMPORTANT - For operation, always correctly close the kettle via the lid. Other-

wise, the temperature control cannot operate correctly and high energy losses and

excessive evaporation occurs. Ensure that the lid set (lid ring and lid) is installed

firmly to avoid that the lid set falls during pouring.

WARNING – The exterior of the kettle and lid set may get hot during ope-

ration! Only touch the kettle and lid by the handles. Boiling water, hot condensate

and steam may cause scalds and damage. Wait until the water stops boiling,

before pouring. Pour carefully to avoid spilling and beware of steam during pou-

ring. You should leave the lid set on the kettle during pouring.

IMPORTANT - Within the complete available temperature range of the appliance,

you can set up the desired temperature just before starting the WATER function.

However, before changing the temperature, ensure that none of the user-defined

programs are selected, because any changes to the settings of these programs

overwrite your former settings.

2. If the desired temperature is not shown on the display, press the TEMP/TIME button

and set up the correct temperature via the selection buttons + or –.

3. Press the WATER button to start the program. The WATER button illuminates. During

heating, a rising bar and the actual temperature within the kettle in steps of 5°C (9°F)

are shown. When the set temperature is reached, an acoustic signal sounds and the

appliance switches to the keep warm function immediately, with the KEEP WARM

indicator illuminating.

4. By the handle, remove the kettle from the power base for pouring. Even without the

kettle, the keep warm function keeps running (see: ‘Properties of Your New Tea Maker

/ Keep Warm Function’). Before pouring, wait a moment until the water stops boiling.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42440 in the language / languages: English, German as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gastroback 42440 Manual

Product: