714654
99
Zoom out
Zoom in
Previous page
1/120
Next page
EN
99
Increasing or Decreasing the Steeping Time during Steeping
WARNING – Pusher plate, pusher, and tea infuser may get hot during
brewing! If required, protect you hands.
With manual operation (using the WATER function), you can move the tea infuser
in and out of the water at any time you like.
With automatic extraction (using the TEA button) it is quite easy to increase the stee-
ping time by immersing the tea infuser into the water again after steeping.
Please keep in mind that the appliance switches off completely, when you do not
remove the kettle from the power base within 5 minutes after steeping. In most cases,
you should use this time duration for replacing the filter system by the lid. When pla-
cing the kettle onto the power base thereafter, the keep warm function keeps running
quite as normal.
To decrease the steeping time, you need to cancel the running program via the
illuminated start/stop button TEA. The cantilever moves up in this case. If required,
grasp the pusher plate of the filter system and move the tea infuser manually.
NOTE: Please keep in mind, that there is no way to continue the program. Therefore,
the keep warm function does not start and the appliance returns to standby mode
immediately, showing the pre-programmed values of the recently used program on
the display. If you wish to keep your tea warm nevertheless, increase the temperature
by 5°C (9°F) and start the WATER function (see: ‘Heating Clear Water’).
MANUAL OPERATION
You can make your tea manually without any movement of the cantilever. In this
case, you lower the tea infuser into the water and lift it out after steeping manually.
This procedure may be useful, when you are trying out a new tea mixture, not know-
ing the appropriate steeping time.
WARNINGThe parts of the filter system may get hot during operation. Only
touch the pusher of the filter system by the top plate. If required, protect your hands.
1. Ensure that the keep warm function is activated (see: ‘Preferences’).
2. Prepare the filter system with the ingredients of your tea (see: ‘Preparing the Filter
System’).
3. Prepare the appliance for operation. Select the desired temperature (see: ‘Pre-
paring the Appliance for Operation’ and ‘Selecting or Setting Up a Program’).
4. Start the program via the WATER button. Wait until the set temperature is rea-
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42440 in the language / languages: English, German as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info