714692
34
Zoom out
Zoom in
Previous page
1/40
Next page
34
Frothing Warm Milk
A. Press once for 1 second on the start button.
B. The button lights up red. The appliance starts to heat the milk and froth.
C. The foaming process is completed when the button is no longer illuminated.
Capacities:
100 ml milk (MIN mark) result in about 300 ml of milk foam.
150mlmilk(MAXmarkFROTH)resultinabout350mlofmilkfoam
Frothing Cold Milk
A. Press once for 3 seconds the start button.
B. The switch lights up blue. The appliance begins to foam the milk without heating.
C. The foaming process is completed when the button is no longer illuminated.
Capacities:
100 ml milk (MIN mark) result in about 150 ml of milk foam.
150mlmilk(MAXmarkFROTH)resultinabout280mlofmilkfoam
Heating milk
A.Pressquicklytwiceonthestartbutton.
B. The switch flashes red. The appliance starts to heat the milk.
C. The heating process is completed when the buttonswitch is no longer illuminated.
Capacities:
maximumof250mlofmilk(MILKMAXmark)
minimum of 100 ml of milk (MIN mark)
8. Once the heating and frothing or whipping cycle is complete, the appliance will shut off
automatically. The button is not illuminated any more.
Note: The heating and frothing cycle can be stopped at anytime by simply lifting the jug off
the power base or by pressing the start button twice.
9. After frothing allow 1 minute for the hot milk to settle after the cycle is complete. Take the
lid of the jug and pour desired amount of hot milk for Cappuccinos, Lattes or other Specialty
Drinks. Take a spoon to hold back the froth when pouring the milk.
Note:Rememberthattheliquidmilkheatstoahighertemperaturethanthefroth.Ifservingto
children, wait until hot milk cools slightly or stop the frothing & heating cycle earlier by lifting
jug off the power base.
10. Spoon out the exceptionally rich froth. If desired, the jug can be removed from the power
base and used for serving. If you want the milk froth or hot milk pour out, please ensure that
the attachments will be hold back. They may fall out, because it is loose on the clutch.
11. After processing the milk froth, unplug the appliance from the power outlet.
12. After each use, clean your appliance following the ›Care & Cleaning‹ instructions. Remem-
ber to rinse in cold water before each use. Do not let any food dry onto the appliance.
ATTENTION:Useliquidfoodforfrothingonlyandonlyaddpowderforflavouring.Solidfood
can damage the milk frothing spiral and the motor and therefore are not permitted for use.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 42325 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 42325 in the language / languages: English, German as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info