714684
32
Zoom out
Zoom in
Previous page
1/48
Next page
32
table or counter. The power cord may not touch hot surfaces or sharp edges. Ensure
that no one will pull the appliance by the power cord. Take care not to entangle in
the power cord. Always grasp the plug to disconnect the power cord. Do not touch
the appliance or power plug with wet hands when the appliance is connected to
the power supply.
• Always ensure that the motor base and the exterior of the jar and blade assem-
bly are completely dry, before assembling/operating the appliance, to avoid risk of
electric shock or fire. DO NOT drip or spill any liquids on the motor base or power
cord. When liquids overflow, run out, or are spilled on the motor base or power
cord, immediately unplug the appliance. Thereafter, clean the appliance and let it
dry for at least 1 day (see: 'Care and Cleaning').
• In the base of the blade assembly, there is a silicone gasket seal ensuring an air-
tight fit with the jars. The gasket seal may become loose during cleaning and food
may stick to the gasket seal due to operation. Thus, after cleaning, ensure that the
gasket seal is properly in place and clean.
• Do not attempt to operate the appliance without the blade assembly screwed pro-
perly and completely leak-free onto the jar to avoid risk of injuries and damage!
See: 'Preparation'.
MOVING PARTS—RISK OF INJURIES
WARNING! The »Design Micro Blender« is designed for processing food. For
this purpose, extremely sharp blades are rotating on high speed. Thus, improper
handling could cause severe injuries and damage. Please keep this in mind.
• Do not insert your hands or any foreign objects (e.g. clothes, brushes, cooking
utensils) in the coupling on top of the motor base, with the appliance connected
to the power supply. Always unplug the appliance before cleaning or moving the
appliance.
• DO NOT try to defeat the safety interlock. Do not attempt to operate the appliance
with the jar or blade assembly damaged or leaking in any way.
• The blades of the blade assembly are very sharp. When handling the blade
assembly, always hold it by the base. Do not touch the blades. Do not attempt to
sharpen the blades. Do not attempt to disassemble the blade assembly in any way.
• Ensure to fasten the blade assembly securely on the jar, before placing the jar onto
the motor base. The threads of the jars, blade assembly, and lids may not be over-
tightened or tilted to avoid leakage and damage to the threads.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41029 in the language / languages: English, German as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info