714684
31
Zoom out
Zoom in
Previous page
1/48
Next page
31
• Do not process hot food. Always leave hot food cool down to room temperature
before filling it into the jar.
• Do not leave the appliance unattended, when it is connected to the power supply.
Always unplug the appliance, before moving or cleaning the appliance, or when
the appliance is not in use. Always hold the housing at both sides near the bottom
for moving the appliance. Do not hold the appliance at the power cord or jar for
moving the appliance. Do not place any hard and/or heavy objects on the appli-
ance or any part of it or in the jar.
• Do not use any abrasive cleaners, cleaning pads (e.g. metal scouring pads), or
any corrosive chemicals (e.g. bleach) for cleaning. Do not immerse the motor base
or power cord in water or any other liquid. Do not spill or drip any liquids on the
motor base or on the power cord to avoid risk of fire and electric shock.
Do not place the motor base or the power cord in an automatic dish-
washer.
• Do not leave any food dry on the appliance. Do not leave any food go bad within
the jars. Clean the appliance after use to prevent an accumulation of baked-on foods
(see: 'Care and Cleaning'). Always keep the appliance and its parts, where it is
clean.
IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES
The appliance is driven electrically. Place the appliance near a suitable wall power
socket to connect the appliance directly to a protected mains power supply with pro-
tective conductor (earth/ground) connected properly. Ensure that the voltage rating
of your mains power supply corresponds to the voltage requirements of the appli-
ance (230 V, 50 Hz, AC, rated for at least 10 A).
The installation of a residual current operated circuit breaker (r.c.c.b.) with a maxi-
mum rated residual operating current of 30 mA in the supplying electrical circuit is
strongly recommended. If in doubt, contact your electrician for further information.
In various foreign countries, the specifications for power supplies are subject to
incompatible norms. Therefore it is possible that power supplies in foreign countries
do not meet the requirements for safe operation of the appliance. Thus, before ope-
rating the appliance abroad, ensure that safe operation is possible.
• Do not use any desk top multi socket outlet, external timer, or remote control sys-
tems. Do not use an extension cord.
• Always handle power cords with care. The pins of the power plug must be smooth
and clean. Always completely unwind the power cord before use. Do not place the
appliance on a power cord. Power cords may never be knotted, twisted, pulled,
strained or squeezed. Do not let the plug or power cord hang over the edge of the
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 41029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 41029 in the language / languages: English, German as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info