714646
35
Zoom out
Zoom in
Previous page
1/44
Next page
35
pressing the ON-button, immerse the processing tool in the food (up to the half of its
height at most), to avoid excessive splashing and dripping of liquids onto the appli-
ance.
1. Prepare your food and fill it into a sufficiently large and high-sided vessel (like the
vessel provided).
WARNING: The provided vessel is not heat resistant. The max. temperature is
70 degrees. Let the boiling food cool down a little bit before starting to blend. The
whisk holder is not dishwasher safe!
2. Ensure, that the appliance is unplugged.
3. Place the shaft of the stainless steel whisk into the whisk holder. Place the whisk
holder onto the motor block and press together until it snaps into place. There
may be no gap between the motor housing and the stainless steel whisk. The
whisk holder must be locked firmly and may not wobble.
4. Immerse the stainless steel whisk into the food. Choose the speed with the vari-
able control switch. It is to be expected, that the food will splash during operati-
on. When processing hot meals, do not hold the appliance in the rising steam to
avoid condensation on the motor housing. Immediately wipe off condensate on
the motor housing. The lower part of the stainless steel whisk should be always
covered with food to avoid splashing.
5. Connect the power plug to a suitable wall power outlet.
6. Hold on to the vessel with one hand and press the ON-button to start the motor.
Slowly circle the appliance during operation. Hold the appliance upright in the
mixing vessel during operation to avoid splashing.
CAUTION: Do not use the appliance with the stainless steel whisk in continuous
operation for more than 2 minutes to avoid overheating. If processing large quantities
of food, regularly interrupt the operation and unplug the appliance for a few minutes,
allow the motor to cool down.
7. Blend your food to the desired quality but at least after 2 minutes of continuous
operation release the ON-button.
8. Wait until the motor stops, before you lift the whisk out of the food.
9. Always unplug the appliance immediately after operation. Lay down the appli-
ance on a stable, dry and clean surface, where it cannot fall.
WARNING: Always release the ON-button, wait until the motor stops complete-
ly and unplug the appliance before assembling or dismantling the tools.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40976 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40976 in the language / languages: English, German as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info