512627
40
Zoom out
Zoom in
Previous page
1/44
Next page
40
CARE AND CLEANING
WARNING: To avoid injury to persons and damage, always release the ON-
button, wait for the motor to stop completely and unplug the appliance immediately
after operation and before laying down, dismantling or cleaning the appliance. With
the appliance connected to the power supply, do not touch the assembled tool with
your hands or any objects.
Note:
The blades are very sharp. Do not touch the blades. Always handle the tools by
the shaft.
DO NOT clean the motor block, the stainless steel blender, the whisk holder, the chop-
per lid or the power cord in an automatic dishwasher. Do not immerse these parts in
any liquids or spill any liquids on it. Always wipe off spilled liquids immediately. Do
not pour or drip any liquids on the motor housing or power cord. Do not place the
appliance on wet or damp surfaces. When liquids are spilled on the motor housing,
immediately unplug the appliance and dry the motor housing to avoid risk of electric
shock or fire. Always handle with care and without violence.
CAUTION: Do not use abrasive cleaners, cleaning pads, corrosive chemicals
(disinfectants, bleach) or any sharp or hard objects (i.e. metal scouring pads) for clea-
ning, for this could damage the surfaces.
Note:
After processing very salty ingredients clean the appliance immediately to avoid
stains and damage.
Carefully clean the appliance and the vessel with a damp sponge or cloth and warm
soapy water. Soak stubborn residues on the processing tools in warm dish-water for
ca. 10 minutes and then remove the residues with a soft washing brush.
1. Always release the ON-button, wait for the motor to stop completely and unplug
the appliance from the power outlet before cleaning.
CAUTION: Always handle with care and without violence. To disassemble the
processing tools, press both release-buttons to release the lock.
2. Remove the used tool by pressing with one hand both release-buttons and gra-
sping the shaft of the used tool with the other hand. Then remove the processing
tool. Clear the leftover food with a plastic or wooden spoon, pay attention not
to scratch the vessel to avoid damage.
3. Clean the processing tools with a soft nylon washing brush and warm dish-water.
Rinse the processing tools thoroughly under running water. Pay attention to the
blades to avoid injuries. Soak stubborn residues in warm dish-water for ca. 10
minutes before cleaning.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40975 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40975 in the language / languages: English, German as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 40975

Gastroback 40975 User Manual - German - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info