512627
38
Zoom out
Zoom in
Previous page
1/44
Next page
38
WARNING: Always release the ON-button, wait until the motor stops and
unplug the appliance before opening the chopper and taking out the food, laying
down the appliance or assembling/dismantling the mini-chopper.
Before connecting the appliance to the mains power supply, always ensure that the
appliance is assembled correctly, according to the following instructions. Do not
touch the blade of the chopper with your hands or any objects (i.e. hair, clothes, tis-
sue), when it is mounted and the appliance is connected to the mains power supply.
1. Prepare your food.
WARNING: The chopper vessel is not heat resistant. The max. temperature is
70 degrees. Let the boiling food cool down a little bit before filling it into the vessel.
2. Ensure, that the appliance is unplugged.
WARNING: The blade of the chopper is very sharp. Do not touch the blades.
Always handle the tools by the shaft.
3. Place the blade of the chopper on the centre pin of the vessel. Than turn it clock-
wise to lock it into place. Always place the chopper vessel on the non-slip-rubber
base to avoid injuries.
4. Place the prepared food into the chopper and place the lid onto the vessel. Fill
the vessel only up to the 500 ml mark. Place the shaft of the chopper onto the
motor block and press together until it snaps into place. There may be no gap
between the motor housing and the chopper. The blender shaft must be locked
firmly and may not wobble.
5. Choose the speed with the variable control switch.
6. Connect the power plug to a suitable wall power outlet.
7. Hold on to the chopper vessel with one hand and press the ON-button to start
the motor.
CAUTION: Do not use the appliance with the chopper attachment in continuo-
us operation for more than 1 minute to avoid overheating. If processing large quan-
tities of food, regularly interrupt the operation and unplug the appliance for a few
minutes, allow the motor to cool down.
8. Chop your food to the desired quality, but at least after 1 minute of continuous
operation release the ON-button.
9. Wait until the motor stops. Always unplug the appliance immediately after ope-
ration or before assembling/disassembling the tools. By pressing both release-
buttons remove the motor block from the chopper attachment and place the motor
block on a suitable surface, where it cannot fall.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40975 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40975 in the language / languages: English, German as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gastroback 40975

Gastroback 40975 User Manual - German - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info