714630
121
Zoom out
Zoom in
Previous page
1/132
Next page
121
Problem Reason The Solution
You cannot fix the
locking arm in the
upper closed posi-
tion.
Only when using
the juicing system,
you must (and can)
engage the locking
arm.
With any optional accessory simply leave the locking arm in
the horizontal position. The appliance will recognize the type of
system installed.
When turning the
selection dial to the
desired speed, the
display is illumina-
ted, but the motor
does not start.
The junction bet-
ween glass jug and
blade assembly is
not turned on suffici-
ently tight.
Switch “OFF” the appliance and unplug from the power supply.
Remove the processing system from the motor base. Try to turn
on the blade assembly a little more tightly. Due to the sealing
ring, there is a firm resistance when screwing on the blade
assembly.
The thread between
blade assembly and
glass container is
tilted.
Switch “OFF” the appliance and unplug from the power supply.
Remove the processing system from the motor base. Unscrew
the blade assembly. Then re-assemble the processing system
without tilting the threads to avoid damage and ensure correct
and leak-free operation (See: ‘Assembling the Glass Jugs’).
The processing sys-
tem is not locked to
the motor base suffi-
ciently tight.
Switch “OFF” the appliance completely. Clasp the collar of the
blade assembly with both hands and turn the blade assem-
bly clockwise a little more. When feeling the first resistance,
you must turn the blade assembly a little more than a finger's
breadth to lock the processing system onto the motor base
(see: ‘Processing Your Food’).
Liquids run down
on the exterior of
the glass jug and/
or accumulate under
the motor base duri-
ng operation.
The glass jug is
overfilled.
Immediately unplug the appliance. Then clean the appliance
(see: ‘Care and Cleaning’). Leave the motor base dry naturally
for 1 day.
Always observe the maximum filling level for each glass contai-
ner (see: ‘Technical Specifications’).
Some liquid has
been spilled while
filling the glass jug.
Immediately unplug the appliance. Then clean the appliance
(see: ‘Care and Cleaning’). Leave the motor base dry naturally
for 1 day. Whenever possible, you should remove the glass jug
from the motor base for filling. Otherwise, carefully avoid spil-
ling liquids onto the exterior of the appliance. Always wipe spil-
led liquids off immediately.
You did not close
the glass jug with
the appropriate lid
or the lid has not
been closed proper-
ly, during operation.
Immediately unplug the appliance. Then clean the appliance
(see: ‘Care and Cleaning’). Leave the motor base dry naturally
for 1 day. Always ensure to close the lid correctly, before star-
ting operation.
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info