714630
120
Zoom out
Zoom in
Previous page
1/132
Next page
120
OPTIONAL ACCESSORIES
Problem Reason The Solution
The glass jug is lea-
king. Water is accu-
mulating under the
blade assembly.
The threads of the
blade assembly and
glass jug have been
tilted.
Completely unscrew the blade assembly. Then position the
blade assembly newly for screwing it onto the glass container.
Ensure to mount the blade assembly without tilting the thread
to avoid leakage and damage to the thread (See: ‘Assembling
the Glass Jugs’).
The sealing ring
is missing or not
inserted correctly.
Before turning the blade assembly onto the glass container,
ensure to place a sealing ring in correct orientation into the
groove at the inner rim of the blade assembly. The ridged side
of the sealing ring must face upwards (See: ‘Assembling the
Glass Jugs’).
The junction bet-
ween blade assem-
bly and glass jug is
not screwed on as
tight as necessary.
Try to turn on the blade assembly a little more tightly. Due to
the sealing ring, there is a firm resistance when screwing on the
blade assembly.
The sealing surface
of the glass jug is
chipped or broken.
Replace the glass jug. Do not use any chipped or cracked glass
parts for preparing food to avoid injuries due to splinters in your
food!
The sealing ring is
damaged.
The sealing ring must be in proper working order. There may
be no tears, cracks, or brittle or worn out parts. Replace the
sealing ring.
There are residues
of food sticking to
the sealing surfaces
of the glass jug,
sealing ring, or bla-
de assembly.
Clean all sealing surfaces thoroughly, removing all dried-on
crusts and residues of food (see: ‘Cleaning the Optional Acces-
sories‘).
You cannot lock the
blade assembly on
the motor base. The
glass jug / grinding
cup is wobbling on
the motor base.
The coupling at
the bottom of the
blade assembly did
not slide onto the
drive coupling of the
motor base.
Without pressure, turn the blade assembly over the drive cou-
pling of the motor base to and fro, until the blade assembly
slides down and comes to a stable stand without any gap. Then
turn the blade assembly clockwise to lock it (see: ‘Processing
Your Food’).
120


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40152 in the language / languages: English, German as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info