714633

Gastroback 40125 Manual

43
Zoom out
Zoom in
Previous page
1/52
Next page
43
Note:
For selecting an appropriate speed, see: ‘Properties of Your New »Easy Juicer
Fun«’.
IMPORTANT: The motor will start agitating immediately, when you touch the right
speed button . With the motor running, be aware that the appliance may move
around on the table or counter due to vibrations. Thus, ensure to keep the appliance
in an appropriate distance to the edge of the working space. After switching ON
the motor immediately fill in your food. You should NOT leave the motor operate
with empty feed chute for more than 1 minute.
Touch the right speed button
to switch ON the motor. Speed 1 will be shown on
the LCD display and the working time display will start running. When touching the
right speed button again, the speed will be increased in steps. To decrease the
speed, touch the left speed button . Select the appropriate speed (see: ‘Properties
of your new »Easy Juicer Fun«’).
WARNING – Risk of Injuries: During operation, very sharp blades are agita-
ting on high speed at the bottom of the filter basket. Additionally, parts of your food
could splash out of the feed chute. Thus, during operation, DO NOT place your fin-
gers or any foreign objects into the feed chute. Do not hold your face over the feed
chute.
Take the pusher out of the feed chute and fill the prepared food into the feed chute.
However, at the maximum, fill the feed chute up to 2 cm beneath the brim, so you
can still insert the pusher. Use the pusher to push down the food only slightly.
Note:
Do not apply too much pressure onto the pusher, as this could decrease the quality
and amount of the juice and even cause the appliance to get blocked. The very
best method of processing is to drive the pusher slightly up and down repeatedly
until the feed chute is empty.
When the feed chute is empty, before processing the next portion, ensure that the
juice jug and pulp container can still absorb a sufficient amount of juice and pulp.
Do not fill the provided juice jug with more than 1000 ml (1 litre) to avoid
overflow. To empty the juice jug, simply take it out from under the juice out-
let. For this you may turn the protrusion on the drip-stop spout upwards to
avoid the spilling of juice. Ensure to turn the protrusion back down-
ward to open the drip-stop spout before juicing another portion of food.
To empty the pulp container, always switch OFF the appliance first (touch the ON/
OFF button twice until the ON/OFF button flashes), then unplug the appliance and
wait until the motor comes to a standstill. Disassemble the pulp container according to
the instructions in chapter ‘Care and Cleaning’ (see: ‘Disassembling the Appliance’).
After emptying juice jug and/or pulp container, ensure that you made the juicer
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40125 in the language / languages: English, German as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info