714633
42
Zoom out
Zoom in
Previous page
1/52
Next page
42
Place the filter basket with the dark base facing downwards in the centre of the pulp
container onto the drive shaft coupling. Then turn the filter basket, until it settles down
and press the filter basket further down, until it engages on the drive shaft coupling
with a click.
Place the cover onto the pulp container with the arrow on the lower brim of the cover
aligned exactly over the arrow on the upper brim of the pulp container. The cover
engages onto the pulp container, when it is assembled correctly.
Fold the two locking arms upwards and hook the locking arms into the protrusions
of the cover. Then lock the locking arms by pressing the lower end of the locking
arms without violence into the motor base. The cover must be locked stable onto the
pulp container now.
Tip: If you cannot lock the locking arms, the cover or pulp container are not assem-
bled correctly. Try again observing the position of the arrows on the parts.
Put the pusher into the feed chute. This can only be done in two orientations.
Ensure that the drip-stop spout of the juice outlet is in the open position with the pro-
trusion facing downwards.
Place the juice jug under the juice outlet. Then close the juice jug with the lid.
However, you may place any other suitable container under the juice outlet.
The appliance is now ready for operation.
TIP: Proceed reversely for removing the individual parts.
Processing Your Food
Prepare the »Easy Juicer Fun« for operation as described in the section above. Pre-
pare your food (see: ‘Tips for Best Results’). Remove all inedible parts and cut your
food in pieces of sufficient size (approx. 5-6 cm).
Ensure that a suitable juice container is placed under the juice outlet and the drip-
stop spout is in the open position.
Insert the power plug of the appliance in the wall power outlet. The ON/OFF button
will flash red.
Touch the ON/OFF button for approx. 5 seconds to switch ON the appliance.
The LCD screen will be activated, showing the already elapsed working time (00:00
on start-up). Additionally, the right speed button
starts flashing (standby mode).
Note:
The delay of 5 seconds for switching ON the appliance is intended as a child safe-
ty interlock to prevent little children from activating the appliance. If you touch the
ON/OFF button in standby mode again, the appliance will switch OFF.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gastroback 40125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gastroback 40125 in the language / languages: English, German as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info