647655
7
Zoom out
Zoom in
Previous page
1/11
Next page
10
Garrett Metal Detectors ACE 200
11
BENCH TESTS
You should conduct bench tests to become more familiar
with your detector’s operation. To conduct a bench test:
1. Place the searchcoil on a flat, non-metallic surface that is
several feet from other metallic objects.
2. Select the ZERO-DISC mode.
3. Pass various metal objects (coins, bottle caps, nails, etc.)
across the searchcoil at a distance of 3 to 4 inches. Your
metal detector will audibly and visually identify the target.
4. Perform this test in all the modes available on your
detector. Observe the sounds
as well as the graphics on
the LCD that are made in
each mode.
5. Record the results of your
bench tests and refer to them
when hunting in the field.
Once you have determined how your test targets register
on the Target ID during bench tests, test them in the soil. Bury
your targets at recorded depths to create a "test plot." Note
how various targets read based upon whether they are lying
in the ground flat or at various angles.
Keep accurate records or surface markers to indicate your
test plot targets and their depths. Try testing these targets
again in several months after the ground has settled, during
periods of extreme drought or after a soaking rain. Take note
of any changes in how these targets are detected.
SENSITIVITY
SENSITIVITY
Button
Sensitivity
Indicator
Use the SENSITIVITY button to step through the four (4)
levels. Use increased sensitivity when searching for very
small or very deep targets. Use lower sensitivity levels when
the detector is behaving erratically (due to excessive metallic
trash, highly mineralized soils, electrical interference or the
presence of other metal detectors) and the erratic operation
cannot be resolved with discrimination.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garret Ace 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garret Ace 200 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garret Ace 200

Garret Ace 200 User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info