629028
7
Zoom out
Zoom in
Previous page
1/16
Next page
À
Displays the sensor status and remaining battery capacity. Includes
ANT+
®
sensors,
Bluetooth
®
,
WiFi
®
, and GPS.
Á
Displays the remaining memory card space for video recording.
Â
Displays the remaining memory card space for photos.
Ã
Displays the field of view, video resolution, and frame rate.
Ä
Displays the photo mode.
Viewing the Sensor Screens
The sensor screens display G-Metrix
data from built-in sensors,
and data from paired
ANT+ sensors. The sensor status screen
displays the connection status for ANT+ sensors, WiFi
connection, and Bluetooth devices.
From the home screen, select to view the sensor status
screen.
From the home screen, select to view the sensor data
screens.
Status Bar Icons
Icons appear at the top of the home screen. A flashing icon
means the device is searching for a signal. A solid icon means
the signal was found or the sensor is connected.
GPS status
WiFi
technology status
Bluetooth technology status
ANT+
sensor status
Battery level
Sensor Status Icons
Icons appear on the sensor status screen. A flashing icon
means the device is searching for a signal. A solid icon means
the signal was found or the sensor is connected.
Heart rate status
Speed and cadence status
Power status
Temperature status
Headset and audio status
OBD-II status
Video
Recording a Video
NOTE:
If the battery power becomes very low while recording
video, the device automatically stops recording, saves the video,
and safely turns off.
1
Move the recording switch forward to start recording video.
If the device is off, it turns on automatically. The device starts
recording video immediately, and the red light turns on.
The screen displays the elapsed recording time
À
, available
recording time
Á
, and video mode
Â
.
2
Move the recording switch backward to stop recording video.
The video is saved on the memory card as an .mp4 file. The
track log for the video and sensor data is saved on the
memory card as a .fit file.
Video Settings
NOTICE
To prevent damage to the device in wet conditions, you must
disable the Video Out setting when the device is not connected
to a USB cable.
Hold MENU, and select Video.
Mode: Sets the video shooting mode (Video Modes, page 3).
NOTE: Additional settings vary based on the selected mode.
Resolution: Sets the height of the video, in pixels.
Interval: Sets the time interval for time-lapse mode.
FPS: Sets the frame rate in frames per second (fps).
Field of View: Sets the zoom level (Field of View Settings,
page 4)
.
Playback: Sets the speed for slow-motion playback.
Lens Correct: Corrects wide-angle barrel distortion and reduces
the field of view.
Enables automatic adjustment for low light.
Stabilizer: Turns on image stabilization to reduce shaky video.
NOTE:
Image stabilization is available for the
VIRB
XE
device only.
Loop: Enables loop recording and sets the number of minutes
of video to store when recording a video loop (Recording a
Video Loop,
page
5)
.
Auto Record: Enables automatic recording when the device is
in motion (Recording Video Automatically,
page
4)
.
Video Out: Enables composite video output (Outputting
Composite Video, page 5)
.
Pro Settings: Enables advanced video and photo settings (Pro
Settings, page 4)
.
NOTE: Pro settings are available for the VIRB
XE device
only.
Video Modes
You can change the video mode to change the resolution,
aspect ratio, frame rate, and speed of recorded video. The
resolution is the width and height of the video, in pixels. The
aspect ratio is the ratio of the video width to the video height.
Standard widescreen televisions use a 16:9 aspect ratio, and
standard full-screen televisions use a 4:3 aspect ratio. The
frame rate is expressed in frames per second (fps). The
playback speed indicates the speed of action in the video
compared to real time.
Hold MENU, and select Video
> Mode
.
Video 3
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin VIRB XE Actioncam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin VIRB XE Actioncam in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin VIRB XE Actioncam

Garmin VIRB XE Actioncam User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info