657479

Garmin VIRB Ultra 30 Actioncam Manual

17
Zoom out
Zoom in
Previous page
1/22
Next page
• Multi-camera support
• Update software and features
The VIRB Edit application is available for Windows
®
and Mac
®
computers. Go to garmin.com/VIRBEdit for more information.
Device Information
Camera Setup
NOTICE
From the main menu, select .
Voice Control: Allows you to use your camera by saying words
and commands (Voice Control, page 4).
Record Light: Turns the recording light on or off.
Tone Volume: Adjusts the volume of camera tones.
Playback Volume: Adjusts the video playback volume.
Orientation: Sets the camera to capture correctly oriented video
and photos with the screen facing up or down (Inverting the
Camera Orientation, page 13).
Microphone: Enables the internal or external microphone.
TIP: If wind noise is an issue when recording video, you can
select Off to record video without audio.
Inverting the Camera Orientation
You can change the camera orientation of your device to easily
access the keys during an activity. Some mounting
configurations require you to change the camera orientation. For
example, if using a chest mount while cycling, you can mount
the camera upside down and tilt it upward to compensate for
forward lean.
1
From the main menu, select > Orientation.
2
Select an option:
• To automatically set the camera orientation, select Auto.
NOTE: After recording starts, the camera orientation is set
and cannot be automatically adjusted.
• To manually set the camera orientation, select Right Side
Up or Upside Down.
System Settings
From the main menu, select > System.
Regulatory Info: Displays regulatory and compliance
information.
GPS: Enables the camera to receive GPS satellite signals.
NOTE: Your camera records GPS position data at all times
when GPS is on. This data is not collected by Garmin.
Language and Region: Sets the on-screen text language, units
of measure, and video standard (Setting the Video Format,
page 5).
Date and Time: Sets the time and date formats (Date and Time
Settings, page 13).
Auto Off: Turns off the camera automatically when it has not
been used for five minutes.
External Power: Sets the camera to turn on when connected to
external power, or enter charging mode automatically. In
charging mode, the screen and all other features turn off
(Charging the Battery, page 1).
TIP: You can use this setting to keep the camera turned off
while connected to power, especially when used with Auto
Off enabled.
Reset: Restores the default settings. You can use the Settings
option to clear all user data, or the Factory Reset option to
restore all settings to the factory default values.
Format Card: Erases all data from the installed memory card
(Erasing Your Memory Card, page 13).
About: Displays important software information and your unit ID.
Date and Time Settings
From the main menu, select > System > Date and Time.
Time Format: Sets the device to show time in a 12-hour or a
24-hour format.
Date Format: Sets the device to show dates in a MM/DD/YY or
a DD/MM/YY format.
Time: Sets the time manually or automatically based on your
GPS position.
Time Zone: Sets the time zone for the device. When you set the
time automatically, the time zone is set based on your GPS
position.
Daylight Saving: Indicates whether daylight saving time is
observed in your region. The Automatic option sets daylight
saving automatically based on your GPS position.
Erasing Your Memory Card
NOTICE
Erased data cannot be restored.
You can erase all photos, videos, and other data on the memory
card installed in your device.
From the main menu, select > System > Format Card >
Yes.
Viewing Regulatory and Compliance Information
From the system settings, select Regulatory Info.
Display Settings
From the main menu, select Display.
Viewfinder: Sets the viewfinder mode (Viewfinder Modes,
page 13).
Screen Timeout: Sets the length of time before the screen turns
off and enters standby mode.
Lock Screen: Locks the touchscreen to prevent inadvertent
screen touches.
Brightness: Adjusts the screen brightness.
Viewfinder Modes
You can use the viewfinder to set up shots, view status
information, or view data from the device sensors. Sensor
information appears as a grouping of data fields, charts, or
graphs, and provides real-time and historical views of the sensor
data recorded on the device.
From the main menu, select Display > Viewfinder > Mode.
Preview: Displays the camera viewfinder and provides
additional options.
Grid: Turns on grid lines to frame and balance your shot in
preview mode.
Overexposure: Highlights overexposed areas of the shot in
preview mode.
Speed: Displays the current speed, average speed, and
maximum speed.
NOTE: All minimum, maximum, and average data resets
after you turn off the device.
Distance: Displays the total distance traveled.
Elevation: Displays the current elevation, elevation graph, and
time scale.
Device Care
NOTICE
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Device Information 13
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin VIRB Ultra 30 Actioncam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin VIRB Ultra 30 Actioncam in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin VIRB Ultra 30 Actioncam

Garmin VIRB Ultra 30 Actioncam User Manual - German - 24 pages

Garmin VIRB Ultra 30 Actioncam User Manual - Dutch - 24 pages

Garmin VIRB Ultra 30 Actioncam User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info