Manual Garmin VIRB Ultra 30 Actioncam (page 15 of 22) (English)

657479

Zoom out

Zoom in

1/22

NOTE: To control the camera using an existing Wi‑Fi

network, the network must be set up to allow connected

devices to see and communicate with each other.

Connect additional cameras to the Wi‑Fi access point or

network (optional).

On your mobile device, start the Garmin VIRB app.

The app searches for cameras and connects automatically.

From the Garmin VIRB app, select an option:

• Use the on-screen controls to control recording or change

settings.

• Use the drop-down list to switch to another camera.

NOTE: This option is available only when multiple

cameras are connected.

• Use the tabs to switch between recording and playback

mode.

Wi‑Fi Networks and Devices

The Garmin VIRB app and some Garmin devices, such as a

compatible chartplotter, can control the camera using a Wi‑Fi

connection. These devices can control recording, change

camera modes and settings, and play or edit recorded videos

and photos.

Your can establish a Wi‑Fi connection by enabling your camera

to broadcast a Wi‑Fi access point. You can also connect your

cameras and devices to an existing network.

For more information about controlling your camera using a

compatible Garmin device, see the owner's manual for the

device.

Setting Up a Wi‑Fi Access Point

Your camera can broadcast a Wi‑Fi access point to create a

network for your devices. You can connect your mobile device,

Garmin device, or other VIRB cameras to the access point. This

is useful for most recording situations, when you do not have

access to an established wireless network.

NOTE: Creating an access point allows you to control one or

more cameras using Wi-Fi technology, but it does not provide

other networking services or access to the Internet.

From the main menu, select Wireless > Wi-Fi > Status to

turn on Wi‑Fi wireless technology.

Select Mode > Create.

Your camera broadcasts a Wi‑Fi network. The network SSID

name and password appear on the camera screen.

Connect your mobile device, cameras, or other devices to the

new Wi‑Fi network.

‑

Fi Access Point Settings

You can change the wireless access point settings for your

device.

From the main menu, select Wireless > Wi-Fi > Status to turn

on Wi‑Fi wireless technology, and select Mode > Create.

Name: Sets the SSID, which identifies your wireless network on

other devices.

Password: Sets the password used to connect to your wireless

network.

Connecting to a Wi‑Fi Network

NOTICE

Connecting to a public or unsecured network may expose your

video and sensor data to others. Use caution when connecting

to an unsecured network.

To control the camera using an existing Wi‑Fi network, the

network must be set up to allow connected devices to see and

communicate with each other.

You can connect your camera to an existing 2.4 GHz Wi‑Fi

network. This could be a home network, a business network, or

a NMEA 2000

marine network.

From the main menu, select Wireless > Wi-Fi > Status to

turn on Wi‑Fi wireless technology.

Select Mode > Connect.

Select Add New.

The camera searches for nearby Wi‑Fi networks.

Select a Wi‑Fi network.

If necessary, enter the network password.

The camera connects to the wireless network.

If necessary, connect your mobile device or Garmin device to

the same network to control the camera.

The camera remembers the network information and connects

automatically when you return to this location.

Managing Wi

‑

Fi Networks

From the main menu, select Wireless > Wi-Fi > Status to

turn on Wi‑Fi wireless technology.

Select Mode > Connect.

Select a saved network.

Select an option:

• To delete the network, select Forget.

The network information is deleted. To connect to this

network again, you must manually connect to it and enter

the network password.

• To change the password stored for the network, select

Change Password.

ANT+ Devices and VIRB Remote

You can start recording, stop recording, and take pictures on

your VIRB camera using another compatible Garmin device with

ANT+ wireless technology, such as watches, activity trackers,

navigation devices, or the VIRB Remote accessory. For more

information about VIRB camera compatibility, see the owner's

manual for your Garmin device.

The VIRB Remote accessory is a portable, mountable remote

that can control your VIRB camera using ANT+ wireless

technology. It has tactile buttons that allow you to start

recording, stop recording, or take a photo without looking at the

remote. Go to www.garmin.com/VIRB to purchase a VIRB

Remote accessory.

Controlling a VIRB Camera Using ANT+ Wireless

Technology

These instructions allow you to enable the remote control

feature for one camera or for your main camera. If you have

multiple cameras, you should follow the instructions for

controlling multiple cameras remotely (Controlling Multiple VIRB

Cameras Using ANT+ Wireless Technology, page 12).

On your camera, from the main menu, select Wireless >

Remote > Status to turn on remote operation.

Select No.

The remote control settings appear, with the camera set as

the main VIRB camera.

Select an option:

• On the ANT+ device, launch the VIRB app or feature. See

the owner's manual for the device for more information.

• On the VIRB remote, follow the pairing instructions in the

accessory manual.

Enabling the Remote Wake Up Feature

The Remote Wake Up feature enables your camera to remain in

a low-power state instead of turning off. This allows your remote

Remote Operation and Garmin VIRB Mobile App 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin VIRB Ultra 30 Actioncam in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin VIRB Ultra 30 Actioncam

Garmin VIRB Ultra 30 Actioncam User Manual - German - 24 pages

Garmin VIRB Ultra 30 Actioncam User Manual - Dutch - 24 pages

Garmin VIRB Ultra 30 Actioncam User Manual - French - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin VIRB Ultra 30 Actioncam Manual

Product: