661253
17
Zoom out
Zoom in
Previous page
1/22
Next page
1
Install your ELM327 compatible OBD-II device in the OBD-II
port of your vehicle.
TIP: See the owner's manual for your vehicle and your OBD-
II device for information about locating the OBD-II port and
installing the OBD-II device.
2
If necessary, enable pairing mode on your OBD-II device.
TIP: See the owner's manual for your OBD-II device to
enable pairing mode.
3
From the VIRB camera main menu, select Wireless >
Bluetooth > Status to turn on Bluetooth wireless technology.
4
Select Add New.
5
Select the OBD-II device to pair.
TIP: If your OBD-II device does not appear in the list, confirm
that it is still in pairing mode and search again.
After the OBD-II device is paired, the device status changes
to Connected.
Removing Paired Bluetooth Devices
1
From the main menu, select Wireless > Bluetooth.
2
Select a wireless device.
3
Select Forget > .
VIRB Edit
The VIRB Edit application provides easy access to these tools
and services for your device.
Review and edit recorded videos
Apply image stabilization to recorded videos
Add G-Metrix gauges, graphs, and more
Add titles and transitions
Edit videos from multiple cameras
Update software and features
Additional editing, sharing, and playback features
The VIRB Edit application is available for Windows
®
and Mac
®
computers. Go to garmin.com/VIRBEdit for more information.
Customizing the Device
Setup Menu
NOTICE
Select > Setup.
Stitch Distance: Sets the focal distance used to stitch 360-
degree video (Changing the Stitching Distance, page 4).
Voice Control: Allows you to control your camera using spoken
commands (Voice Control, page 5).
Record Light: Turns the recording LED on or off. This can be
useful to eliminate ambient light from the LED when
recording in darker environments.
Tones: Turns the camera tones on or off. When this setting is
enabled, tones play to indicate various camera actions and
statuses, such as capturing a photo, starting recording, or
connecting to a device.
Self Timer: Sets the length of the default self timer used when
you take a photo.
Microphone: Allows you to change the microphone mode or
turn the microphones off (Microphone Modes, page 5).
System: Allows you to change system settings, such as
language, units, region, and GPS.
SD Card: Allows you to view detailed information about the
installed memory card or format the memory card.
About: Displays important software information, your unit ID,
and regulatory and compliance information.
Formatting Your Memory Card
NOTICE
Erased data cannot be restored.
You can format the memory card installed in your camera to
erase all photos, videos, and other data. You may also need to
format the memory card the first time you use it in your camera.
From the main menu, select Setup > SD Card > Format
Card > .
System Settings
From the main menu, select Setup > System.
GPS: Enables the camera to determine your location, speed,
and elevation using GPS satellite signals. When this setting
is enabled, the camera includes GPS information in the G-
Metrix data when you record a video or photo.
NOTE: Your camera records GPS position data at all times
when the GPS setting is enabled. This data is not collected
by Garmin.
Language: Sets the on-screen text language.
Units: Sets the system for units of measure to metric or statute.
Auto-Off: Turns off the camera automatically after it has not
been used for five minutes.
External Power: Sets the camera behavior when it is connected
to external power. You can select the Charge Mode option to
enter charging mode automatically or the Power On option to
turn the camera on. While in charging mode, the screen and
all other features turn off (Charging the Battery, page 1).
Factory Reset: Restores all settings to the factory default
values.
Device Information
Status LEDs
The LEDs on the front of the camera indicate the camera status.
LED
Color
LED Action Status
Green Flashing The camera is turned on, but it is not
recording.
Green Solid The camera is connected to a
computer in USB mass storage
mode.
Off Off (while not
connected to
external power)
The camera is turned off.
Off Off (while connected
to external power)
The camera is turned off, and the
battery is fully charged.
Red Solid (top LED only) The battery is charging.
Red Flashing The camera is recording video.
Yellow
and red
One or more yellow
flashes, followed by
a long red flash
The camera has captured one or
more photos. The LED flashes yellow
while the self-timer is counting down
and red when the photo is captured.
Green or
red
Flashing rapidly The camera will turn off or stop
recording soon. This could be
because the battery is below a 10%
charge level, the memory card has
less than 10 minutes of recording
time remaining, or the internal
temperature is too high.
Blue Flashing
intermittently
The WiFi radio is turned on.
VIRB Edit 13
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Virb 360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Virb 360 in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Virb 360

Garmin Virb 360 User Manual - German - 24 pages

Garmin Virb 360 User Manual - Dutch - 24 pages

Garmin Virb 360 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info