691273

Garmin Vector 3S Manual

6
Zoom out
Zoom in
Previous page
1/14
Next page
2
Align the cleat
À
, washers
Á
, and bolts
Â
.
3
Use a 4 mm hex key to loosely attach each bolt to the sole of
the shoe.
4
Adjust the cleat to the shoe in your preferred position.
This can be adjusted after a trial ride.
5
Tighten the cleat firmly to the shoe.
NOTE: Garmin recommends torque of 4 to 6 lbf-ft. (5 to 8 N-
m).
Adjusting the Release Tension
NOTICE
Do not overtighten the release tension screw on the bottom of
the pedal. The release tension should be adjusted equally for
both pedals.
Use a 3 mm hex key to adjust the release tension of each
pedal.
There is a window on the back of the pedal binding that
shows the allowable range.
About the Vector 3S System
The single-sensing Vector 3S measures forces on the left pedal
in order to approximate your total power. For information about
upgrading, see Upgrading Your Vector 3S to a Dual Sensing
System, page 6.
NOTE: The Vector 3S system does not support cycling
dynamics.
Pairing Vector with Your Edge 1030
Before you can view Vector data on the Edge device, you must
pair the devices.
Pairing is the connecting of ANT+
®
wireless sensors. This
procedure contains instructions for the Edge 1030. If you have
another compatible device, see Other Compatible Devices,
page 6, or go to www.garmin.com/manuals/vector3.
1
Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Turn on the Edge device.
3
Select > Sensors > Add Sensor > Power.
4
Rotate the crank arm.
5
Select your sensor.
6
Select Add.
When the sensor is paired with your device, is solid. You
can customize a data field to display power data
(Customizing the Data Fields, page 2).
Your First Ride
Before you ride with Vector for the first time, you must enter the
crank length. The Vector system automatically calibrates after
each ride. You must also enter the crank length when you move
Vector to another bike.
This procedure contains instructions for the Edge 1030 device. If
you have another compatible device, see Other Compatible
Devices, page 6, or go to www.garmin.com/manuals/vector3.
Entering the Crank Length
The crank length is often printed on the crank arm. This
procedure contains instructions for the Edge 1030. If you have
another compatible device, see Other Compatible Devices,
page 6, or see your owner's manual.
1
Rotate the pedals a few times in order to activate Vector.
2
Select > Sensors.
3
Select your sensor.
4
Select Sensor Details > Crank Length.
5
Enter the crank length, and select .
Customizing the Data Fields
This procedure contains instructions for the Edge 820, 1000,
and 1030 devices. If you have another compatible device, see
your owner's manual.
1
Hold a data field to change it.
2
Select a category.
3
Select a data field.
Training
Pedal-Based Power
Vector measures pedal-based power.
Vector measures the force you apply a few hundred times every
second. Vector also measures your cadence or rotational
pedaling speed. By measuring the force, the direction of force,
the rotation of the crank arm, and time, Vector can determine
power (watts). Because Vector independently measures left and
right leg power, it reports your left-right power balance.
NOTE: The Vector S system does not provide left-right power
balance.
Cycling Dynamics
Cycling dynamics metrics measure how you apply power
throughout the pedal stroke, and where you apply power on the
pedal, allowing you to understand your particular way of riding.
Understanding how and where you produce power allows you to
train more efficiently and evaluate your bike fit.
NOTE: You must have a dual sensing Vector system to use
cycling dynamics metrics.
For more information, go to www.garmin.com/cyclingdynamics.
Using Cycling Dynamics
Before you can use cycling dynamics, you must pair the Vector
power meter with your device (Pairing Vector with Your Edge
1030, page 2).
NOTE: Recording cycling dynamics uses additional device
memory.
1
Go for a ride.
2
Scroll to the cycling dynamics screen to view your power
phase data
À
, total power
Á
, and platform center offset
Â
.
2 Training
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Vector 3S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Vector 3S in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Vector 3S

Garmin Vector 3S User Manual - German - 16 pages

Garmin Vector 3S User Manual - Dutch - 14 pages

Garmin Vector 3S User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info