Manual Garmin Vector 2S (page 10 of 16) (English)

589622

Zoom out

Zoom in

1/16

Use a coin to twist the cover clockwise back into place,

making sure the arrow points to locked.

Wait 10 seconds.

After you replace the pedal pod battery, you must set the

installation angle on your Edge (Setting the Installation Angle).

Other Compatible Devices

Edge 810 and 510 Device Instructions

Pairing Vector with Your Edge 810 or 510 Device

Bring the Edge device within range (3 m) of the sensor.

NOTE: Stay 10 m away from other ANT+ sensors while

pairing.

Turn on the Edge device.

From the home screen, select > Bike Profiles.

Select a profile.

Select .

Enable the sensor, and select Search.

Rotate the crank arm a few times.

When the sensor is paired with your Edge device, the sensor

status is Connected. You can customize a data field to display

Vector data.

Entering the Crank Length

The crank length is often printed on the crank arm.

Rotate the pedals a few times in order to activate Vector.

From the home screen, select > Bike Profiles.

Select a profile.

Select Crank Length > Manual.

Enter the crank length, and select .

Edge 800 Device Instructions

Pairing Vector with the Edge 800 Device

Bring the Edge device within range (3 m) of the sensor.

NOTE: Stay 10 m away from other ANT+ sensors while

pairing.

Turn on the Edge device.

Select MENU > > Bike Settings > Bike Profiles.

Select a bike.

Select ANT + Power > Power Meter > Yes.

Rotate the crank arm a few times.

Select .

When the sensor is paired with your Edge device, a message

appears, and appears solid on the status page. You can

customize a data field to display Vector data.

Entering the Crank Length

The crank length is often printed on the crank arm.

Rotate the pedals a few times in order to activate Vector.

Select MENU > > Bike Settings > Bike Profiles.

Select a profile.

Select Bike Details > Crank Length > Custom.

Enter the crank length, and select .

Edge 500 Device Instructions

Pairing Vector with the Edge 500 Device

Bring the Edge device within range (3 m) of the sensor.

NOTE: Stay 10 m away from other ANT+ sensors while

pairing.

Turn on the Edge device.

Hold MENU.

Select Settings > Bike Settings.

Select a bike.

Select ANT + Power.

Enable the sensor, and select Search.

Rotate the crank arm a few times.

When the sensor is paired with your Edge device, a message

appears, and appears solid on the main menu. You can

customize a data field to display Vector data.

Entering the Crank Length

The crank length is often printed on the crank arm.

Rotate the pedals a few times in order to activate Vector.

Hold MENU.

Select Settings > Bike Settings.

Select a bike.

Select Bike Details > More > Crank Length > Manual.

Enter the crank length.

Customizing the Data Fields

This procedure contains instructions for the Edge 500 device.

Hold MENU.

Select Settings > Bike Settings > Data Fields.

Select a page.

Select the number of data fields to appear on the page.

Select a data field.

fēnix

3 Device Instructions

Pairing Vector with the fēnix 3 Device

Bring the fēnix device within 3 m of the sensor.

NOTE: Stay 10 m away from other ANT+ sensors while

pairing.

Hold UP.

Select Settings > Sensors > Add New > Power.

Rotate the crank arm a few times.

Select your sensor.

When the sensor is paired with your fēnix device, the sensor

status changes from Searching to Connected.

Customizing the Data Fields

Hold UP.

Select Settings > Apps > Bike > Data Screens.

Select a screen.

Select a data field to change it.

Entering the Crank Length

The crank length is often printed on the crank arm.

Rotate the pedals a few times in order to activate Vector.

Hold UP.

Select Settings > Sensors.

Select your sensor.

Select Crank Length.

Enter the crank length, and select .

fēnix 2 Device Instructions

Pairing Vector with the fēnix 2 Device

Before you can pair ANT+ sensors, Bluetooth

wireless

technology must be turned off.

6 Other Compatible Devices

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Vector 2S in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Vector 2S Manual

Product: