657470

Garmin PRO Control 2 Manual

7
Zoom out
Zoom in
Previous page
1/14
Next page
The red LED is solid when the receiver is in pairing mode.
4
Within five seconds, select on the handheld device.
The red LED on the receiver flashes and turns off.
The receiver is paired with the selected number on the handheld
device.
Attaching the Receiver
NOTICE
Do not attach the receiver in the path of the launch. Verify that
the receiver does not interfere with the releasing mechanism of
the launch device.
1
Attach the receiver to the mounting plate.
2
Attach the mounting plate to the third-party launch device
according to the manufacturer's instructions.
Connecting a Receiver to a Training Device
You can connect two third-party launch devices using the left
and right output jacks of the receiver.
1
Pull back the weather cap
À
from the left or right output jack
of the receiver.
2
Connect one end of the 3.5 mm cable to the output jack
Á
of
the receiver.
3
Connect the other end of the 3.5 mm cable to the input jack
of the training device.
4
Repeat steps 1 through 3 to attach a second training device
to the unused output jack.
Activating a Remote Device
Before you can activate a receiver, you must pair it with the
handheld device.
1
Select or to select a receiver.
2
Select to play the receiver sound (optional).
3
Select an option:
• Select L to activate the device plugged into the left
receiver port.
• Select R
to activate the device plugged into the right
receiver port.
Activating Multiple Devices Simultaneously
You can pair multiple receivers with the same number on the
handheld device to activate multiple devices at the same time.
For example, you can activate multiple remote releasers
simultaneously to simulate a flushed flock of birds.
1
While pairing your receivers, select the same number on the
handheld device for each of the receivers that you intend to
activate simultaneously (Pairing a PRO Control 2 Receiver,
page 2)
.
2
Select or to select the number paired with the
receivers.
3
Select an option:
• Select
L to activate the left port of all receivers paired with
the selected number.
• Select
R to activate the right port of all receivers paired
with the selected number.
Rapid Launch
The rapid launch feature allows you to activate multiple remote
devices in sequence. You can activate all left ports on receivers
1 through 18 in sequence, all right ports on receivers 1 through
18 in sequence, or all ports on one side followed by all ports on
the other side.
To use the rapid launch feature most effectively, you should pair
your receivers numerically in the order you want to activate
them. You can pair your receivers to new numbers on the
handheld device at any time (
Receiver Pairing,
page
2).
Activating Multiple Devices Sequentially
1
On the handheld, select to select receiver 1.
2
Select an option:
• Select to select
L for rapid launch of all left ports in
sequence, followed by all right ports in sequence.
• Select to select r for rapid launch of all right ports in
sequence, followed by all left ports in sequence.
3
Select to switch between rapid launch of all left and all
right ports, if necessary.
4
Select an option:
• Select
RAPID LAUNCH.
The device activates the selected port of the next remote
device in order each time you select the key.
• Hold
RAPID LAUNCH.
The device rapidly activates the selected ports in order for
as long as you hold the key. After the device activates
receiver 18, activation restarts on receivers 1 through 18
for ports on the other side.
5
Release
RAPID LAUNCH to stop rapid launch.
6
Repeat step 4 to resume rapid launch.
Rapid launch resumes with the next receiver number.
Receiver Sound
CAUTION
The speaker is very loud. You should avoid activating the
speaker near a person. If you must use the speaker near a
person, muffle the speaker before activating it to decrease the
volume.
The receiver includes a speaker that can play multiple sounds.
The sounds can be used as a training tool in coordination with
remote device launches. You can also use the sound to help
locate a lost or hidden receiver.
Selecting the PRO Control 2
Receiver Sound
Before you can select the receiver sound, you must be in remote
launcher mode (
Selecting an Operating Mode,
page
1).
Remote Training Devices 3
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin PRO Control 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin PRO Control 2 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info