657470
5
Zoom out
Zoom in
Previous page
1/14
Next page
Introduction
WARNING
See the
Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Charging the Handheld Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
NOTE: The device does not charge when it is outside the
approved temperature range (PRO Control 2
Handheld Device
Specifications, page
6)
.
You should fully charge the battery before you use the device for
the first time. Charging a fully depleted battery takes about 2
hours.
1
Lift the weather cap
À
.
2
Plug the small end of the power cable into the USB port
Á
on
the device.
3
Plug the other end of the power cable into an appropriate
power source.
The LCD display on the handheld device shows the current
battery charge level. Charging is complete when the battery
charge level icon stops flashing.
Charging the Receiver
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
NOTE:
The device does not charge when it is outside the
approved temperature range (
PRO Control
2 Remote Receiver
Device Specifications, page
6).
1
Lift the weather cap from the USB port.
2
Plug the small end of the power cable into the USB port.
3
Plug the large end of the USB cable into an AC adapter or a
computer USB port.
4
Plug the AC adapter into a standard wall outlet.
5
Charge the device completely.
The LED is solid red while charging. The LED is solid green
when the device is fully charged.
NOTE: The battery takes four hours to fully charge.
Battery Status
When the device is on, the status LED flashes every few
seconds. The color of the status LED indicates the battery
power level.
Green Good battery power.
Yellow Low battery power. Charge the battery soon.
Red Critically low battery power or missing battery. Charge the
battery immediately. Launching is disabled.
Turning the Handheld Device On or Off
The handheld device turns off automatically after you have not
used it for one hour. You cannot turn off the device manually.
NOTE:
The device and LCD display use very little power while
the device is not transmitting, and the one-hour delay does not
significantly impact battery life.
Select any key to turn on the device.
The LCD display turns on, and the device keys can be used
immediately.
Turning the Receiver On and Off
1
Hold the power key until the LED is solid green to turn on the
receiver.
After you release the power key, the LED flashes to indicate
the battery level (Battery Status, page 1)
.
2
Hold the power key until the LED is solid red to turn off the
receiver.
Selecting an Operating Mode
The
PRO Control
2 handheld device operates in either remote
launcher mode or dog training mode. The features, display, and
key functions change based on the mode.
Select MODE to switch the operating mode.
A training mode indicator appears at the bottom of the LCD
display (
Dog Training Display,
page
4) when the device is in
dog training mode.
Remote Training Devices
The
PRO Control
2 handheld device can control up to 18
compatible
PRO Control series receivers. A PRO Control series
receiver can activate several brands of third-party devices,
including remote launchers, remote releasers, and other remote
accessories. Each receiver includes a speaker to play a sound
and two ports to connect remote devices.
Your PRO Control
2 handheld device can remotely activate the
sound and two remote devices on each receiver. You can also
use the rapid launch feature to activate multiple devices in rapid
succession.
Introduction 1
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin PRO Control 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin PRO Control 2 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info