740374
28
Zoom out
Zoom in
Previous page
1/36
Next page
INSTINCT
®
SOLAR
Owner’s Manual
© 2020 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates
and supplemental information concerning the use of this product.
Garmin
®
, the Garmin logo, and ANT+
®
, Auto Lap
®
, Auto Pause
®
, Edge
®
, inReach
®
, Instinct
®
, QuickFit
®
, TracBack
®
, VIRB
®
, Virtual Partner
®
, and Xero
®
are trademarks of Garmin Ltd. or its
subsidiaries, registered in the USA and other countries. Body Battery
, Garmin Connect
, Garmin Explore
, Garmin Express
, Garmin Move IQ
, HRM-Swim
, HRM-Tri
, tempe
, and
TrueUp
are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
Android
is a trademark of Google Inc. Apple
®
, iPhone
®
, and Mac
®
are trademarks of Apple Inc., registered in the U.S. and other countries. The BLUETOOTH
®
word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Advanced heartbeat analytics by Firstbeat. Windows
®
and Windows NT
®
are registered trademarks of Microsoft
Corporation in the United States and other countries. Other trademarks and trade names are those of their respective owners.
This product is ANT+
®
certified. Visit www.thisisant.com/directory for a list of compatible products and apps.
M/N: A03821
Table of Contents
Introduction.....................................................................1
Getting Started............................................................................1
Buttons................................................................................... 1
Using the Watch.....................................................................1
Viewing the Controls Menu............................................... 1
Viewing Widgets................................................................1
Pairing Your Smartphone with Your Device............................... 1
Charging the Device................................................................... 1
Product Updates......................................................................... 2
Setting Up Garmin Express................................................... 2
Solar Charging................................................................ 2
Viewing the Solar Widget............................................................2
Tips for Solar Charging............................................................... 2
Activities and Apps........................................................ 2
Starting an Activity...................................................................... 2
Tips for Recording Activities.................................................. 2
Power Modes......................................................................... 2
Stopping an Activity.................................................................... 2
Adding or Removing a Favorite Activity...................................... 3
Creating a Custom Activity......................................................... 3
Indoor Activities.......................................................................... 3
Calibrating the Treadmill Distance......................................... 3
Recording a Strength Training Activity...................................3
Outdoor Activities........................................................................3
Viewing Your Ski Runs.......................................................... 3
Using the Metronome.............................................................4
Starting an Expedition............................................................ 4
Changing the Track Point Recording Interval................... 4
Recording a Track Point Manually.................................... 4
Viewing Track Points.........................................................4
Going Hunting........................................................................ 4
Going Fishing......................................................................... 4
Swimming................................................................................... 4
Swim Terminology................................................................. 4
Stroke Types.......................................................................... 5
Tips for Swimming Activities.................................................. 5
Resting During Pool Swimming............................................. 5
Auto Rest............................................................................... 5
Training with the Drill Log...................................................... 5
Turning Off Wrist-based Heart Rate While Swimming........... 5
Training........................................................................... 5
Setting Up Your User Profile.......................................................5
Fitness Goals......................................................................... 5
About Heart Rate Zones........................................................ 5
Setting Your Heart Rate Zones......................................... 5
Letting the Device Set Your Heart Rate Zones................. 6
Heart Rate Zone Calculations........................................... 6
Activity Tracking..........................................................................6
Auto Goal............................................................................... 6
Using the Move Alert..............................................................6
Sleep Tracking....................................................................... 6
Using Automated Sleep Tracking......................................6
Using Do Not Disturb Mode.............................................. 6
Intensity Minutes.................................................................... 6
Earning Intensity Minutes.................................................. 7
Garmin Move IQ™................................................................. 7
Activity Tracking Settings....................................................... 7
Turning Off Activity Tracking............................................. 7
Workouts.....................................................................................7
Following a Workout From Garmin Connect.......................... 7
Starting a Workout................................................................. 7
About the Training Calendar.................................................. 7
Using Garmin Connect Training Plans.............................. 7
Interval Workouts
........................................................................ 7
Creating an Interval Workout................................................. 7
Starting an Interval Workout.................................................. 8
Stopping an Interval Workout.................................................8
Using Virtual Partner®................................................................ 8
Setting a Training Target............................................................ 8
Cancelling a Training Target.................................................. 8
Racing a Previous Activity.......................................................... 8
Personal Records....................................................................... 8
Viewing Your Personal Records............................................ 8
Restoring a Personal Record................................................. 8
Clearing a Personal Record................................................... 8
Clearing All Personal Records............................................... 8
Clocks.............................................................................. 9
Setting an Alarm......................................................................... 9
Starting the Countdown Timer.................................................... 9
Saving a Quick Timer.............................................................9
Deleting a Timer.....................................................................9
Using the Stopwatch................................................................... 9
Syncing the Time with GPS........................................................ 9
Setting Alerts.............................................................................. 9
Adding Alternate Time Zones..................................................... 9
Navigation....................................................................... 9
Saving Your Location..................................................................9
Editing Your Saved Locations.............................................. 10
Viewing the Altimeter, Barometer, and Compass..................... 10
Projecting a Waypoint............................................................... 10
Navigating to a Destination....................................................... 10
Creating and Following a Course on Your Device.................... 10
Creating a Course on Garmin Connect.................................... 10
Sending a Course to Your Device............................................ 10
Viewing or Editing Course Details............................................ 10
Marking and Starting Navigation to a Man Overboard
Location.................................................................................... 10
Navigating with Sight 'N Go...................................................... 10
Navigating to Your Starting Point During an Activity................ 11
Navigating to the Starting Point of a Saved Activity................. 11
Stopping Navigation................................................................. 11
Calculating the Size of an Area................................................ 11
Map........................................................................................... 11
Panning and Zooming the Map............................................ 11
Compass...................................................................................11
Altimeter and Barometer........................................................... 11
History........................................................................... 11
Using History............................................................................ 11
Viewing Your Time in Each Heart Rate Zone...................... 12
Viewing Data Totals.................................................................. 12
Using the Odometer..................................................................12
Syncing Activities...................................................................... 12
Deleting History........................................................................ 12
Connected Features..................................................... 12
Enabling Bluetooth Notifications............................................... 12
Viewing Notifications............................................................ 12
Managing Notifications.........................................................12
Turning Off the Bluetooth Smartphone Connection............. 12
Turning On and Off Smartphone Connection Alerts............ 13
Locating a Lost Mobile Device.................................................. 13
Garmin Connect........................................................................13
Updating the Software Using the Garmin Connect App...... 13
Updating the Software Using Garmin Express.................... 13
Using Garmin Connect on Your Computer..................... 13
Manually Syncing Data with Garmin Connect..................... 13
Garmin Explore™..................................................................... 13
Heart Rate Features..................................................... 13
Table of Contents i
Using the Stress Level Widget..................................................14
Wrist-based Heart Rate............................................................ 14
Wearing the Device..............................................................14
Tips for Erratic Heart Rate Data...........................................14
Viewing the Heart Rate Widget............................................ 14
Broadcasting Heart Rate Data to Garmin Devices.............. 14
Broadcasting Heart Rate Data During an Activity........... 14
Setting an Abnormal Heart Rate Alert................................. 14
Turning Off the Wrist-based Heart Rate Monitor................. 15
Body Battery™..........................................................................15
Viewing the Body Battery Widget.........................................15
Tips for Improved Body Battery Data................................... 15
Pulse Oximeter............................................................. 15
Getting Pulse Oximeter Readings............................................ 15
Turning On Pulse Oximeter Sleep Tracking............................. 15
Tips for Erratic Pulse Oximeter Data........................................ 15
Customizing Your Device............................................ 16
Widgets..................................................................................... 16
Customizing the Widget Loop.............................................. 16
inReach Remote.................................................................. 16
Using the inReach Remote............................................. 16
VIRB Remote....................................................................... 16
Controlling a VIRB Action Camera.................................. 16
Controlling a VIRB Action Camera During an Activity..... 17
Activities and App Settings....................................................... 17
Customizing the Data Screens............................................ 17
Adding a Map to an Activity................................................. 18
Alerts.................................................................................... 18
Setting an Alert................................................................18
Auto Lap...............................................................................18
Marking Laps by Distance............................................... 18
Enabling Auto Pause®......................................................... 18
Enabling Auto Climb............................................................ 19
3D Speed and Distance....................................................... 19
Turning On and Off the Lap Key.......................................... 19
Using Auto Scroll................................................................. 19
Changing the GPS Setting................................................... 19
GPS and Other Satellite Systems................................... 19
UltraTrac......................................................................... 19
Power Save Timeout Settings..............................................19
Customizing Your Activity List.................................................. 19
Removing an Activity or App.....................................................19
Customizing the Controls Menu................................................20
Customizing the Watch Face.................................................... 20
Sensors Settings.......................................................................20
Compass Settings................................................................ 20
Calibrating the Compass Manually................................. 20
Setting the North Reference............................................20
Altimeter Settings................................................................. 20
Calibrating the Barometric Altimeter............................... 20
Barometer Settings.............................................................. 20
Calibrating the Barometer............................................... 20
Xero Laser Location Settings............................................... 21
Map Settings............................................................................. 21
Navigation Settings................................................................... 21
Customizing Map Features.................................................. 21
Heading Settings..................................................................21
Setting Navigation Alerts......................................................21
Power Manager Settings.......................................................... 21
Customizing the Battery Saver Feature............................... 21
Customizing Power Modes.................................................. 21
Restoring a Power Mode..................................................... 21
System Settings........................................................................ 22
Time Settings....................................................................... 22
Changing the Backlight Settings.......................................... 22
Customizing the Hot Keys....................................................22
Changing the Units of Measure
........................................... 22
Viewing Device Information...................................................... 22
Viewing E-label Regulatory and Compliance Information.... 22
Wireless Sensors......................................................... 22
Pairing Your Wireless Sensors................................................. 22
Using an Optional Bike Speed or Cadence Sensor.................. 23
Foot Pod................................................................................... 23
Improving Foot Pod Calibration........................................... 23
Calibrating Your Foot Pod Manually.................................... 23
Setting Foot Pod Speed and Distance................................. 23
tempe™.................................................................................... 23
Device Information....................................................... 23
Specifications............................................................................23
Battery Life Information........................................................ 23
Data Management.................................................................... 23
Disconnecting the USB Cable..............................................23
Deleting Files....................................................................... 24
Device Maintenance..................................................... 24
Device Care.............................................................................. 24
Cleaning the Device............................................................. 24
Changing the Bands................................................................. 24
Troubleshooting........................................................... 24
My device is in the wrong language......................................... 24
Managing Language Files........................................................ 25
Is my smartphone compatible with my device?........................ 25
My phone will not connect to the device................................... 25
Can I use my Bluetooth sensor with my watch?....................... 25
Restarting Your Device............................................................. 25
Resetting All Default Settings................................................... 25
Acquiring Satellite Signals........................................................ 25
Improving GPS Satellite Reception......................................25
The temperature reading is not accurate.................................. 25
Maximizing the Battery Life.......................................................25
Activity Tracking........................................................................26
My daily step count does not appear................................... 26
My step count does not seem accurate............................... 26
The step counts on my device and my Garmin Connect
account don't match............................................................. 26
The floors climbed amount does not seem accurate........... 26
My intensity minutes are flashing......................................... 26
Getting More Information.......................................................... 26
Appendix....................................................................... 26
Data Fields................................................................................26
Wheel Size and Circumference................................................ 28
Symbol Definitions.................................................................... 29
Index.............................................................................. 30
ii Table of Contents
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Getting Started
When using your watch the first time, you should complete these
tasks to set it up and get to know the basic features.
1
Press CTRL to turn on the watch (Buttons, page 1).
2
Follow the on-screen instructions to complete the initial
setup.
During the initial setup, you can install the Garmin Connect
app and pair your smartphone with your watch to receive
notifications and more (Pairing Your Smartphone with Your
Device, page 1).
3
Charge the device completely (Charging the Device,
page 1).
4
Start an activity (Starting an Activity, page 2).
Buttons
LIGHT
CTRL
Press to turn the backlight on and off.
Press to turn the device on.
Hold to view the controls menu.
GPS
Press to view the activity list and start or stop an activity.
Press to choose an option in a menu.
Hold to view GPS coordinates and save your location.
BACK
SET
Press to return to the previous screen.
Hold to view the clock menu.
DOWN
ABC
Press to scroll through the widget loop and menus.
Hold to view the altimeter, barometer, and compass (ABC)
screen.
UP
MENU
Press to scroll through the widget loop and menus.
Hold to view the menu.
Using the Watch
Hold CTRL to view the controls menu.
The controls menu provides quick access to frequently used
functions, such as turning on do not disturb mode, turning on
the battery saver feature, and turning the watch off.
From the watch face, press UP or DOWN to scroll through
the widget loop.
Your watch comes preloaded with widgets that provide at-a-
glance information. More widgets are available when you pair
your watch with a smartphone.
From the watch face, press GPS to start an activity or open
an app (Starting an Activity, page 2).
Hold MENU to customize the watch face, adjust settings, and
pair wireless sensors.
Viewing the Controls Menu
The controls menu contains options, such as turning on do not
disturb mode, locking the keys, and turning the device off.
NOTE: You can add, reorder, and remove the options in the
controls menu (Customizing the Controls Menu, page 20).
1
From any screen, hold CTRL.
2
Press UP or DOWN to scroll through the options.
Viewing Widgets
Your device comes preloaded with several widgets, and more
are available when you pair your device with a smartphone.
Press UP or DOWN.
The device scrolls through the widget loop.
Press GPS to view additional options and functions for a
widget.
Pairing Your Smartphone with Your Device
To use the connected features of the Instinct device, it must be
paired directly through the Garmin Connect app, instead of from
the Bluetooth
®
settings on your smartphone.
1
From the app store on your smartphone, install and open the
Garmin Connect app.
2
Bring your smartphone within 10 m (33 ft.) of your device.
3
Press CTRL to turn on the device.
The first time you turn on the device, it is in pairing mode.
TIP: To manually enter pairing mode, you can hold MENU,
and select Settings > Pair Phone.
4
Select an option to add your device to your Garmin Connect
account:
If this is the first time you are pairing a device with the
Garmin Connect app, follow the on-screen instructions.
If you already paired another device with the Garmin
Connect app, from the or menu, select Garmin
Devices > Add Device, and follow the on-screen
instructions.
Charging the Device
WARNING
This device contains a lithium-ion battery. See the Important
Safety and Product Information guide in the product box for
product warnings and other important information.
NOTICE
To prevent corrosion, thoroughly clean and dry the contacts and
the surrounding area before charging or connecting to a
computer. Refer to the cleaning instructions in the appendix.
Introduction 1
1
Plug the small end of the USB cable into the charging port on
your device.
2
Plug the large end of the USB cable into a USB charging
port.
3
Charge the device completely.
Product Updates
On your computer, install Garmin Express
(www.garmin.com
/express). On your smartphone, install the Garmin Connect app.
This provides easy access to these services for Garmin
®
devices:
Software updates
Data uploads to Garmin Connect
Product registration
Setting Up Garmin Express
1
Connect the device to your computer using a USB cable.
2
Go to www.garmin.com/express.
3
Follow the on-screen instructions.
Solar Charging
Watch models with solar charging capability allow you to charge
your watch while you use it.
Viewing the Solar Widget
From the watch face, press UP or DOWN to scroll to the solar
widget.
A graph of the intensity of solar input for the last 6 hours
appears.
Tips for Solar Charging
To maximize the battery life of your watch, follow these tips.
When you are wearing the watch, avoid covering the face
with your sleeve.
When you are not wearing the watch, point the face toward a
source of bright light, such as sunlight or fluorescent light.
The watch will charge faster when exposed to sunlight,
because the solar charging lens is optimized for the spectrum
of sunlight.
For maximum battery performance, charge the watch in
bright sunlight.
NOTE: The watch protects itself from overheating and stops
charging automatically if the internal temperature exceeds
the solar charging temperature threshold (Specifications,
page 23).
NOTE: The watch does not solar charge when connected to
an external power source or when the battery is full.
Activities and Apps
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect community.
For more information about activity tracking and fitness metric
accuracy, go to garmin.com/ataccuracy.
Starting an Activity
When you start an activity, GPS turns on automatically (if
required).
1
From the watch face, press GPS.
2
If this is the first time you have started an activity, select the
checkbox next to each activity to add to your favorites, and
select Done.
3
Select an option:
Select an activity from your favorites.
Select , and select an activity from the extended activity
list.
4
If the activity requires GPS signals, go outside to an area with
a clear view of the sky, and wait until the device is ready.
The device is ready after it establishes your heart rate,
acquires GPS signals (if required), and connects to your
wireless sensors (if required).
5
Press GPS to start the activity timer.
The device records activity data only while the activity timer is
running.
Tips for Recording Activities
Charge the device before starting an activity (Charging the
Device, page 1).
Press UP or DOWN to view additional data pages.
Power Modes
Power modes allow you to quickly adjust system settings,
activity settings, and GPS settings to extend battery life during
an activity. For example, power modes can disconnect paired
sensors and turn on the UltraTrac GPS option. You can also
create custom power modes.
During an activity, hold MENU, select Power Mode, and select
an option.
Stopping an Activity
1
Press GPS.
2
Select an option:
To resume your activity, select Resume.
To save the activity and return to watch mode, select
Save > Done.
To suspend your activity and resume it at a later time,
select Resume Later.
To navigate back to the starting point of your activity along
the path you traveled, select Back to Start > TracBack.
NOTE: This feature is available only for activities that use
GPS.
To navigate back to the starting point of your activity by
the most direct path, select Back to Start > Straight Line.
NOTE: This feature is available only for activities that use
GPS.
2 Solar Charging
To measure the difference between your heart rate at the
end of the activity and your heart rate two minutes later,
select Recovery HR, and wait while the timer counts
down.
To discard the activity and return to watch mode, select
Discard > Yes.
NOTE: After stopping the activity, the device saves it
automatically after 30 minutes.
Adding or Removing a Favorite Activity
The list of your favorite activities appears when you press GPS
from the watch face, and it provides quick access to the
activities you use most frequently. The first time you press GPS
to start an activity, the device prompts you to select your favorite
activities. You can add or remove favorite activities at any time.
1
Hold MENU.
2
Select Settings > Activities & Apps.
Your favorite activities appear at the top of the list with a
white background. Other activities appear in the extended list
with a black background.
3
Select an option:
To add a favorite activity, select the activity, and select
Set as Favorite.
To remove a favorite activity, select the activity, and select
Remove from Favorites.
Creating a Custom Activity
1
From the watch face, press GPS.
2
Select Add.
3
Select an option:
Select Copy Activity to create your custom activity
starting from one of your saved activities.
Select Other to create a new custom activity.
4
If necessary, select an activity type.
5
Select a name or enter a custom name.
Duplicate activity names include a number, for example:
Bike(2).
6
Select an option:
Select an option to customize specific activity settings. For
example, you can customize the data screens or auto
features.
Select Done to save and use the custom activity.
7
Select Yes to add the activity to your list of favorites.
Indoor Activities
The Instinct device can be used for training indoors, such as
running on an indoor track or using a stationary bike or indoor
trainer. GPS is turned off for indoor activities (Activities and App
Settings, page 17).
When running or walking with GPS turned off, speed, distance,
and cadence are calculated using the accelerometer in the
device. The accelerometer is self-calibrating. The accuracy of
the speed, distance, and cadence data improves after a few
outdoor runs or walks using GPS.
TIP: Holding the handrails of the treadmill reduces accuracy.
You can use an optional foot pod to record pace, distance, and
cadence.
Calibrating the Treadmill Distance
To record more accurate distances for your treadmill runs, you
can calibrate the treadmill distance after you run at least 1.5 km
(1 mi.) on a treadmill. If you use different treadmills, you can
manually calibrate the treadmill distance on each treadmill or
after each run.
1
Start a treadmill activity (Starting an Activity, page 2).
2
Run on the treadmill until your Instinct Solar device records at
least 1.5 km (1 mi.).
3
After you complete your run, press GPS.
4
Select an option:
To calibrate the treadmill distance the first time, select
Save.
The device prompts you to complete the treadmill
calibration.
To manually calibrate the treadmill distance after the first-
time calibration, select Calibrate & Save > Yes.
5
Check the treadmill display for the distance traveled, and
enter the distance on your device.
Recording a Strength Training Activity
You can record sets during a strength training activity. A set is
multiple repetitions (reps) of a single move.
1
From the watch face, press GPS.
2
Select Strength.
The first time you record a strength training activity, you must
select which wrist your watch is on.
3
Press GPS to start the set timer.
4
Start your first set.
The device counts your reps. Your rep count appears when
you complete at least four reps.
TIP: The device can only count reps of a single move for
each set. When you want to change moves, you should finish
the set and start a new one.
5
Press BACK to finish the set.
The watch displays the total reps for the set. After several
seconds, the rest timer appears.
6
If necessary, press DOWN, and edit the number of reps.
TIP: You can also add the weight used for the set.
7
When you are done resting, press BACK to start your next
set.
8
Repeat for each strength training set until your activity is
complete.
9
After your last set, press GPS to stop the set timer.
10
Select Save.
Outdoor Activities
The Instinct device comes preloaded with outdoor activities,
such as running and cycling. GPS is turned on for outdoor
activities. You can add new activities based on default activities,
such as walking or rowing. You can also add custom activities to
your device (Creating a Custom Activity, page 3).
Viewing Your Ski Runs
Your device records the details of each downhill skiing or
snowboarding run using the auto run feature. This feature is
turned on by default for downhill skiing and snowboarding. It
automatically records new ski runs based on your movement.
The timer pauses when you stop moving downhill and when you
are on a chairlift. The timer remains paused during the chairlift
ride. You can start moving downhill to restart the timer. You can
view run details from the paused screen or while the timer is
running.
1
Start a skiing or snowboarding activity.
2
Hold MENU.
3
Select View Runs.
4
Press UP and DOWN to view details of your last run, your
current run, and your total runs.
Activities and Apps 3
The run screens include time, distance traveled, maximum
speed, average speed, and total descent.
Using the Metronome
The metronome feature plays tones at a steady rhythm to help
you improve your performance by training at a faster, slower, or
more consistent cadence.
NOTE: This feature is not available for all activities.
1
From the watch face, press GPS.
2
Select an activity.
3
Hold MENU.
4
Select the activity settings.
5
Select Metronome > Status > On.
6
Select an option:
Select Beats / Minute to enter a value based on the
cadence you want to maintain.
Select Alert Frequency to customize the frequency of the
beats.
Select Sounds to customize the metronome tone and
vibration.
7
If necessary, select Preview to listen to the metronome
feature before you run.
8
Go for a run (Starting an Activity, page 2).
The metronome starts automatically.
9
During your run, press UP or DOWN to view the metronome
screen.
10
If necessary, hold MENU to change the metronome settings.
Starting an Expedition
You can use the Expedition app to prolong the battery life while
recording a multi-day activity.
1
From the watch face, press GPS.
2
Select Expedition.
3
Press GPS to start the activity timer.
The device enters low power mode and collects GPS track
points once an hour. To maximize battery life, the device
turns off all sensors and accessories, including the
connection to your smartphone.
Changing the Track Point Recording Interval
During an expedition, GPS track points are recorded once an
hour by default. You can change how often GPS track points are
recorded. Recording track points less frequently maximizes
battery life.
NOTE: To maximize battery life, GPS track points are not
recorded after sunset. You can customize this option in the
activity settings.
1
From the watch face, press GPS.
2
Select Expedition.
3
Hold MENU.
4
Select the activity settings.
5
Select Recording Interval.
6
Select an option.
Recording a Track Point Manually
During an expedition, track points are recorded automatically
based on the selected recording interval. You can manually
record a track point at any time.
1
During an expedition, press UP or DOWN to view the map
page.
2
Press GPS.
3
Select Add Point.
Viewing Track Points
1
During an expedition, press UP or DOWN to view the map
page.
2
Press GPS.
3
Select View Points.
4
Select a track point from the list.
5
Select an option:
To start navigating to the track point, select Go To.
To view detailed information about the track point, select
Details.
Going Hunting
You can save locations relevant to your hunt and view a map of
saved locations.
1
From the watch face, press GPS.
2
Select Hunt.
3
From the time of day data screen, press GPS > Start Hunt.
4
From the time of day data screen, press GPS, and select an
option:
To save your current location, select Save Location.
To view locations saved during this hunt activity, select
Hunt Locations.
To view all previously saved locations, select Saved
Locations.
5
After you complete your activity, scroll to the time of day data
screen, press GPS, and select End Hunt.
Going Fishing
You can keep track of your daily fish count, count down your
competition time, or set an interval timer to keep track of your
fishing pace.
1
From the watch face, press GPS.
2
Select Fish.
3
From the time of day data screen, press GPS > Start Fish.
4
From the time of day data screen, press GPS, and select an
option:
To add the catch to your fish count and save the location,
select Log Catch.
To save your current location, select Save Location.
To set an interval timer, end time, or end time reminder for
the activity, select Fish Timers.
5
After you complete your activity, scroll to the time of day data
screen, press GPS, and select End Fish.
Swimming
NOTICE
The device is intended for surface swimming. Scuba diving with
the device may damage the product and will void the warranty.
Swim Terminology
Length: One trip down the pool.
Interval: One or more consecutive lengths. A new interval starts
after a rest.
Stroke: A stroke is counted every time your arm wearing the
device completes a full cycle.
Swolf: Your swolf score is the sum of the time for one pool
length and the number of strokes for that length. For
example, 30 seconds plus 15 strokes equals a swolf score of
45. For open water swimming, swolf is calculated over 25
meters. Swolf is a measurement of swimming efficiency and,
like golf, a lower score is better.
4 Activities and Apps
Stroke Types
Stroke type identification is available only for pool swimming.
Your stroke type is identified at the end of a length. Stroke types
appear in your swimming history and in your Garmin Connect
account. You can also select stroke type as a custom data field
(Customizing the Data Screens, page 17).
Free Freestyle
Back Backstroke
Breast Breaststroke
Fly Butterfly
Mixed More than one stroke type in an interval
Drill Used with drill logging (Training with the Drill Log, page 5)
Tips for Swimming Activities
Before starting a pool swimming activity, follow the on-screen
instructions to select your pool size or enter a custom size.
The next time you start a pool swimming activity, the device
uses this pool size. You can hold MENU, select the activity
settings, and select Pool Size to change the size.
Press BACK to record a rest during pool swimming.
The device automatically records swim intervals and lengths
for pool swimming.
Press BACK to record an interval during open water
swimming.
Resting During Pool Swimming
The default rest screen displays two rest timers. It also displays
time and distance for the last completed interval.
NOTE: Swim data is not recorded during a rest.
1
During your swim activity, press BACK to start a rest.
The display reverses to white text on a black background,
and the rest screen appears.
2
During a rest, press UP or DOWN to view other data screens
(optional).
3
Press BACK, and continue swimming.
4
Repeat for additional rest intervals.
Auto Rest
The auto rest feature is available only for pool swimming. Your
device automatically detects when you are resting, and the rest
screen appears. If you rest for more than 15 seconds, the device
automatically creates a rest interval. When you resume
swimming, the device automatically starts a new swim interval.
You can turn on the auto rest feature in the activity options
(Activities and App Settings, page 17).
TIP: For best results using the auto rest feature, minimize your
arm motions while resting.
If you do not want to use the auto rest feature, you can select
BACK to manually mark the beginning and end of each rest
interval.
Training with the Drill Log
The drill log feature is available only for pool swimming. You can
use the drill log feature to manually record kick sets, one-arm
swimming, or any type of swimming that is not one of the four
major strokes.
1
During your pool swim activity, press UP or DOWN to view
the drill log screen.
2
Press BACK to start the drill timer.
3
After you complete a drill interval, press BACK.
The drill timer stops, but the activity timer continues to record
the entire swim session.
4
Select a distance for the completed drill.
Distance increments are based on the pool size selected for
the activity profile.
5
Select an option:
To start another drill interval, press BACK.
To start a swim interval, press UP or DOWN to return to
the swim training screens.
Turning Off Wrist-based Heart Rate While Swimming
Wrist-based heart rate is turned on by default for swim activities.
The device is also compatible with the HRM-Pro
accessory and
the HRM-Swim
accessory. If both wrist-based heart rate and
chest heart rate data are available, your device uses the chest
heart rate data.
1
From the heart rate widget, hold MENU.
NOTE: You may need to add the widget to your widget loop
(Customizing the Widget Loop, page 16).
2
Select Heart Rate Options > While Swimming > Off.
Training
Setting Up Your User Profile
You can update your gender, birth year, height, weight, and
heart rate zone settings. The device uses this information to
calculate accurate training data.
1
From the watch face, hold UP.
2
Select Settings > User Profile.
3
Select an option.
Fitness Goals
Knowing your heart rate zones can help you measure and
improve your fitness by understanding and applying these
principles.
Your heart rate is a good measure of exercise intensity.
Training in certain heart rate zones can help you improve
cardiovascular capacity and strength.
If you know your maximum heart rate, you can use the table
(Heart Rate Zone Calculations, page 6) to determine the best
heart rate zone for your fitness objectives.
If you do not know your maximum heart rate, use one of the
calculators available on the Internet. Some gyms and health
centers can provide a test that measures maximum heart rate.
The default maximum heart rate is 220 minus your age.
About Heart Rate Zones
Many athletes use heart rate zones to measure and increase
their cardiovascular strength and improve their level of fitness. A
heart rate zone is a set range of heartbeats per minute. The five
commonly accepted heart rate zones are numbered from 1 to 5
according to increasing intensity. Generally, heart rate zones are
calculated based on percentages of your maximum heart rate.
Setting Your Heart Rate Zones
The device uses your user profile information from the initial
setup to determine your default heart rate zones. You can set
separate heart rate zones for sport profiles, such as running,
cycling, and swimming. For the most accurate calorie data
during your activity, set your maximum heart rate. You can also
set each heart rate zone and enter your resting heart rate
manually. You can manually adjust your zones on the device or
using your Garmin Connect account.
1
From the watch face, hold MENU.
2
Select Settings > User Profile > Heart Rate.
3
Select Max. HR, and enter your maximum heart rate.
4
Select Resting HR, and enter your resting heart rate.
You can use the average resting heart rate measured by your
device, or you can set a custom resting heart rate.
5
Select Zones > Based On.
Training 5
6
Select an option:
Select BPM to view and edit the zones in beats per
minute.
Select %Max. HR to view and edit the zones as a
percentage of your maximum heart rate.
Select %HRR to view and edit the zones as a percentage
of your heart rate reserve (maximum heart rate minus
resting heart rate).
7
Select a zone, and enter a value for each zone.
8
Select Sport Heart Rate, and select a sport profile to add
separate heart rate zones (optional).
Letting the Device Set Your Heart Rate Zones
The default settings use your profile information to set your
maximum heart rate and your heart rate zones as a percentage
of your maximum heart rate.
Verify that your user profile settings are accurate (Setting Up
Your User Profile, page 5).
Run often with the wrist or chest heart rate monitor.
Try a few heart rate training plans, available from your
Garmin Connect account.
View your heart rate trends and time in zones using your
Garmin Connect account.
Heart Rate Zone Calculations
Zone % of
Maximum
Heart Rate
Perceived Exertion Benefits
1 50–60% Relaxed, easy pace,
rhythmic breathing
Beginning-level
aerobic training,
reduces stress
2 60–70% Comfortable pace,
slightly deeper
breathing, conversation
possible
Basic cardiovascular
training, good
recovery pace
3 70–80% Moderate pace, more
difficult to hold
conversation
Improved aerobic
capacity, optimal
cardiovascular training
4 80–90% Fast pace and a bit
uncomfortable, breathing
forceful
Improved anaerobic
capacity and
threshold, improved
speed
5 90–100% Sprinting pace,
unsustainable for long
period of time, labored
breathing
Anaerobic and
muscular endurance,
increased power
Activity Tracking
The activity tracking feature records your daily step count,
distance traveled, intensity minutes, floors climbed, calories
burned, and sleep statistics for each recorded day. Your calories
burned includes your base metabolism plus activity calories.
The number of steps taken during the day appears on the steps
widget. The step count is updated periodically.
For more information about activity tracking and fitness metric
accuracy, go to garmin.com/ataccuracy.
Auto Goal
Your device creates a daily step goal automatically, based on
your previous activity levels. As you move during the day, the
device shows your progress toward your daily goal .
If you choose not to use the auto goal feature, you can set a
personalized step goal on your Garmin Connect account.
Using the Move Alert
Sitting for prolonged periods of time can trigger undesirable
metabolic state changes. The move alert reminds you to keep
moving. After one hour of inactivity, Move! and the move bar
appear. Additional segments appear after every 15 minutes of
inactivity. The device also beeps or vibrates if audible tones are
turned on (System Settings, page 22).
Go for a short walk (at least a couple of minutes) to reset the
move alert.
Sleep Tracking
While you are sleeping, the device automatically detects your
sleep and monitors your movement during your normal sleep
hours. You can set your normal sleep hours in the user settings
on your Garmin Connect account. Sleep statistics include total
hours of sleep, sleep levels, and sleep movement. You can view
your sleep statistics on your Garmin Connect account.
NOTE: Naps are not added to your sleep statistics. You can use
do not disturb mode to turn off notifications and alerts, with the
exception of alarms (Using Do Not Disturb Mode, page 6).
Using Automated Sleep Tracking
1
Wear your device while sleeping.
2
Upload your sleep tracking data to the Garmin Connect site
(Manually Syncing Data with Garmin Connect, page 13).
You can view your sleep statistics on your Garmin Connect
account.
Using Do Not Disturb Mode
You can use do not disturb mode to turn off the backlight, tone
alerts, and vibration alerts. For example, you can use this mode
while sleeping or watching a movie.
NOTE: You can set your normal sleep hours in the user settings
on your Garmin Connect account. You can enable the During
Sleep option in the system settings to automatically enter do not
disturb mode during your normal sleep hours (System Settings,
page 22).
NOTE: You can add options to the controls menu (Customizing
the Controls Menu, page 20).
1
Hold CTRL.
2
Select .
Intensity Minutes
To improve your health, organizations such as the World Health
Organization recommend at least 150 minutes per week of
moderate intensity activity, such as brisk walking, or 75 minutes
per week of vigorous intensity activity, such as running.
The device monitors your activity intensity and tracks your time
spent participating in moderate to vigorous intensity activities
(heart rate data is required to quantify vigorous intensity). You
can work toward achieving your weekly intensity minutes goal by
participating in at least 10 consecutive minutes of moderate to
vigorous intensity activities. The device adds the amount of
moderate activity minutes with the amount of vigorous activity
minutes. Your total vigorous intensity minutes are doubled when
added.
6 Training
Earning Intensity Minutes
Your Instinct Solar device calculates intensity minutes by
comparing your heart rate data to your average resting heart
rate. If heart rate is turned off, the device calculates moderate
intensity minutes by analyzing your steps per minute.
Start a timed activity for the most accurate calculation of
intensity minutes.
Exercise for at least 10 consecutive minutes at a moderate or
vigorous intensity level.
Wear your device all day and night for the most accurate
resting heart rate.
Garmin Move IQ
When your movements match familiar exercise patterns, the
Move IQ feature automatically detects the event and displays it
in your timeline. The Move IQ events show activity type and
duration, but they do not appear in your activities list or
newsfeed. For more detail and accuracy, you can record a timed
activity on your device.
Activity Tracking Settings
Hold MENU, and select Settings > Activity Tracking.
Status: Turns off the activity tracking features.
Move Alert: Displays a message and the move bar on the
digital watch face and steps screen. The device also beeps
or vibrates if audible tones are turned on (System Settings,
page 22).
Goal Alerts: Allows you to turn on and off goal alerts, or turn
them off only during activities. Goal alerts appear for your
daily steps goal, daily floors climbed goal, and weekly
intensity minutes goal.
Move IQ: Allows you to turn on and off Move IQ events.
Sleep Pulse Ox: Sets your device to record pulse oximeter
readings while you are inactive during the day or
continuously while you sleep.
Turning Off Activity Tracking
When you turn off activity tracking, your steps, floors climbed,
intensity minutes, sleep tracking, and Move IQ events are not
recorded.
1
Hold MENU.
2
Select Settings > Activity Tracking > Status > Off.
Workouts
You can create custom workouts that include goals for each
workout step and for varied distances, times, and calories.
During your activity, you can view workout-specific data screens
that contain workout step information, such as the workout step
distance or average step pace.
Your device includes several preloaded workouts for multiple
activities. You can create and find more workouts using Garmin
Connect, or select a training plan that has built-in workouts and
transfer them to your device.
You can schedule workouts using Garmin Connect. You can
plan workouts in advance and store them on your device.
Following a Workout From Garmin Connect
Before you can download a workout from Garmin Connect, you
must have a Garmin Connect account (Garmin Connect,
page 13).
1
Select an option:
Open the Garmin Connect app.
Go to connect.garmin.com.
2
Select Training > Workouts.
3
Find a workout, or create and save a new workout.
4
Select or Send to Device.
5
Follow the on-screen instructions.
Starting a Workout
Before you can start a workout, you must download a workout
from your Garmin Connect account.
1
From the watch face, press GPS.
2
Select an activity.
3
Hold MENU.
4
Select Training > My Workouts.
5
Select a workout.
NOTE: Only workouts that are compatible with the selected
activity appear in the list.
6
Select Do Workout.
7
Press GPS to start the activity timer.
After you begin a workout, the device displays each step of the
workout, step notes (optional), the target (optional), and the
current workout data.
About the Training Calendar
The training calendar on your device is an extension of the
training calendar or schedule you set up in Garmin Connect.
After you have added a few workouts to the Garmin Connect
calendar, you can send them to your device. All scheduled
workouts sent to the device appear in the calendar widget.
When you select a day in the calendar, you can view or do the
workout. The scheduled workout stays on your device whether
you complete it or skip it. When you send scheduled workouts
from Garmin Connect, they overwrite the existing training
calendar.
Using Garmin Connect Training Plans
Before you can download and use a training plan from Garmin
Connect, you must have a Garmin Connect account (Garmin
Connect, page 13), and you must pair the Instinct device with a
compatible smartphone.
1
From the Garmin Connect app, select or .
2
Select Training > Training Plans.
3
Select and schedule a training plan.
4
Follow the on-screen instructions.
5
Review the training plan in your calendar.
Interval Workouts
You can create interval workouts based on distance or time. The
device saves your custom interval workout until you create
another interval workout. You can use open intervals for track
workouts and when you are running a known distance.
Creating an Interval Workout
1
From the watch face, press GPS.
2
Select an activity.
3
Hold MENU.
4
Select Training > Intervals > Edit > Interval > Type.
5
Select Distance, Time, or Open.
TIP: You can create an open-ended interval by selecting the
Open option.
6
If necessary, select Duration, enter a distance or time
interval value for the workout, and select .
7
Press BACK.
8
Select Rest > Type.
9
Select Distance, Time, or Open.
10
If necessary, enter a distance or time value for the rest
interval, and select .
11
Press BACK.
Training 7
12
Select one or more options:
To set the number of repetitions, select Repeat.
To add an open-ended warm up to your workout, select
Warm Up > On.
To add an open-ended cool down to your workout, select
Cool Down > On.
Starting an Interval Workout
1
From the watch face, press GPS.
2
Select an activity.
3
Hold MENU.
4
Select Training > Intervals > Do Workout.
5
Press GPS to start the activity timer.
6
When your interval workout has a warm up, press BACK to
begin the first interval.
7
Follow the on-screen instructions.
After you complete all of the intervals, a message appears.
Stopping an Interval Workout
At any time, press BACK to stop the current interval or rest
period and transition to the next interval or rest period.
After all intervals and rest periods are complete, press BACK
to end the interval workout and transition to a timer that can
be used for cool down.
At any time, press GPS to stop the activity timer. You can
resume the timer or end the interval workout.
Using Virtual Partner
®
Your Virtual Partner is a training tool designed to help you meet
your goals. You can set a pace for the Virtual Partner and race
against it.
NOTE: This feature is not available for all activities.
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select an activity.
4
Select the activity settings.
5
Select Data Screens > Add > Virtual Partner.
6
Enter a pace or speed value.
7
Press UP or DOWN to change the location of the Virtual
Partner screen (optional).
8
Start your activity (Starting an Activity, page 2).
9
Press UP or DOWN to scroll to the Virtual Partner screen and
see who is leading.
Setting a Training Target
The training target feature works with the Virtual Partner feature
so you can train toward a set distance, distance and time,
distance and pace, or distance and speed goal. During your
training activity, the device gives you real-time feedback about
how close you are to achieving your training target.
1
From the watch face, press GPS.
2
Select an activity.
3
Hold MENU.
4
Select Training > Set a Target.
5
Select an option:
Select Distance Only to select a preset distance or enter
a custom distance.
Select Distance and Time to select a distance and time
target.
Select Distance and Pace or Distance and Speed to
select a distance and pace or speed target.
The training target screen appears and displays your
estimated finish time. The estimated finish time is based on
your current performance and the time remaining.
6
Press GPS to start the activity timer.
Cancelling a Training Target
1
During an activity, hold MENU.
2
Select Cancel Target > Yes.
Racing a Previous Activity
You can race a previously recorded or downloaded activity. This
feature works with the Virtual Partner feature so you can see
how far ahead or behind you are during the activity.
NOTE: This feature is not available for all activities.
1
From the watch face, press GPS.
2
Select an activity.
3
Hold MENU.
4
Select Training > Race an Activity.
5
Select an option:
Select From History to select a previously recorded
activity from your device.
Select Downloaded to select an activity you downloaded
from your Garmin Connect account.
6
Select the activity.
The Virtual Partner screen appears indicating your estimated
finish time.
7
Press GPS to start the activity timer.
8
After you complete your activity, press GPS, and select
Save.
Personal Records
When you complete an activity, the device displays any new
personal records you achieved during that activity. Personal
records include your fastest time over several typical race
distances and longest run, ride, or swim.
Viewing Your Personal Records
1
From the watch face, hold MENU.
2
Select History > Records.
3
Select a sport.
4
Select a record.
5
Select View Record.
Restoring a Personal Record
You can set each personal record back to the one previously
recorded.
1
From the watch face, hold MENU.
2
Select History > Records.
3
Select a sport.
4
Select a record to restore.
5
Select Previous > Yes.
NOTE: This does not delete any saved activities.
Clearing a Personal Record
1
From the watch face, hold MENU.
2
Select History > Records.
3
Select a sport.
4
Select a record to delete.
5
Select Clear Record > Yes.
NOTE: This does not delete any saved activities.
Clearing All Personal Records
1
From the watch face, hold MENU.
8 Training
2
Select History > Records.
3
Select a sport.
4
Select Clear All Records > Yes.
The records are deleted for that sport only.
NOTE: This does not delete any saved activities.
Clocks
Setting an Alarm
You can set multiple alarms. You can set each alarm to sound
once or to repeat regularly.
1
From any screen, hold SET.
2
Select Alarms.
3
Enter the alarm time.
4
Select Repeat, and select when the alarm should repeat
(optional).
5
Select Sounds, and select a type of notification (optional).
6
Select Backlight > On to turn on the backlight with the alarm
(optional).
7
Select Label, and select a description for the alarm
(optional).
Starting the Countdown Timer
1
From any screen, hold SET.
2
Select Timers.
3
Enter the time.
4
If necessary, select an option to edit the timer:
To automatically restart the timer after it expires, press UP
and select Auto Restart > On.
To select a type of notification, press UP and select
Sounds.
5
Press GPS to start the timer.
Saving a Quick Timer
You can set up to ten separate quick timers.
1
From any screen, hold SET.
2
Select Timers.
3
Select an option:
To save your first quick timer, enter the time, press UP,
and select Save.
To save additional quick timers, select Add Timer, and
enter the time.
Deleting a Timer
1
From any screen, hold SET.
2
Select Timers.
3
Select a timer.
4
Press UP.
5
Select Delete.
Using the Stopwatch
1
From any screen, hold SET.
2
Select Stopwatch.
3
Press GPS to start the timer.
4
Press SET to restart the lap timer .
The total stopwatch time
continues running.
5
Press GPS to stop both timers.
6
Press UP, and select an option.
Syncing the Time with GPS
Each time you turn on the device and acquire satellites, the
device automatically detects your time zones and the current
time of day. You can also manually sync the time with GPS
when you change time zones, and to update for daylight saving
time.
1
From any screen, hold SET.
2
Select Set Time With GPS.
3
Wait while the device locates satellites (Acquiring Satellite
Signals, page 25).
Setting Alerts
1
From any screen, hold SET.
2
Select Alerts.
3
Select an option:
To set an alert to sound a specific number of minutes or
hours before the actual sunset occurs, select Til Sunset >
Status > On, select Time, and enter the time.
To set an alert to sound a specific number of minutes or
hours before the actual sunrise occurs, select Til Sunrise
> Status > On, select Time, and enter the time.
To set an alert to sound when a storm approaches, select
Storm > On, select Rate, and select the rate of pressure
change.
To set an alert to sound every hour, select Hourly > On.
Adding Alternate Time Zones
You can display the current time of day in additional time zones
on the alternate time zones widget. You can add up to three
alternate time zones.
NOTE: You may need to add the alternate time zones widget to
the widget loop (Customizing the Widget Loop, page 16).
1
From the watch face, press UP or DOWN to view the
alternate time zones widget.
2
Press GPS.
3
Select Add Zone.
4
Select a time zone.
5
If necessary, rename the time zone.
Navigation
Saving Your Location
You can save your current location to navigate back to it later.
1
From any screen, hold GPS.
2
Press GPS.
3
If necessary, press DOWN to edit location information.
Clocks 9
Editing Your Saved Locations
You can delete a saved location or edit its name, elevation, and
position information.
1
From the watch face, press GPS.
2
Select Navigate > Saved Locations.
3
Select a saved location.
4
Select an option to edit the location.
Viewing the Altimeter, Barometer, and
Compass
The device contains internal altimeter, barometer, and compass
sensors with automatic calibration.
1
From any screen, hold ABC.
2
Press UP or DOWN to view separate altimeter, barometer,
and compass screens.
Projecting a Waypoint
You can create a new location by projecting the distance and
bearing from your current location to a new location.
NOTE: You may need to add the Project Wpt. app to the
activities and apps list.
1
From the watch face, press GPS.
2
Select Project Wpt..
3
Press UP or DOWN to set the heading.
4
Press GPS.
5
Press DOWN to select a unit of measure.
6
Press UP to enter the distance.
7
Press GPS to save.
The projected waypoint is saved with a default name.
Navigating to a Destination
You can use your device to navigate to a destination or follow a
course.
1
From the watch face, press GPS.
2
Select an activity.
3
Hold MENU.
4
Select Navigation.
5
Select a category.
6
Respond to the on-screen prompts to choose a destination.
7
Select Go To.
Navigation information appears.
8
Press GPS to begin navigation.
Creating and Following a Course on Your
Device
1
From the watch face, press GPS.
2
Select an activity.
3
Hold MENU.
4
Select Navigation > Courses > Create New.
5
Enter a name for the course, and select .
6
Select Add Location.
7
Select an option.
8
If necessary, repeat steps 6 and 7.
9
Select Done > Do Course.
Navigation information appears.
10
Press GPS to begin navigation.
Creating a Course on Garmin Connect
Before you can create a course on the Garmin Connect app,
you must have a Garmin Connect account (Garmin Connect,
page 13).
1
From the Garmin Connect app, select or .
2
Select Training > Courses > Create Course.
3
Select a course type.
4
Follow the on-screen instructions.
5
Select Done.
NOTE: You can send this course to your device (Sending a
Course to Your Device, page 10).
Sending a Course to Your Device
You can send a course you created using the Garmin Connect
app to your device (Creating a Course on Garmin Connect,
page 10).
1
From the Garmin Connect app, select or .
2
Select Training > Courses.
3
Select a course.
4
Select > Send to Device.
5
Select your compatible device.
6
Follow the on-screen instructions.
Viewing or Editing Course Details
You can view or edit course details before you navigate a
course.
1
From the watch face, press GPS.
2
Select an activity.
3
Hold MENU.
4
Select Navigation > Courses.
5
Press GPS to select a course.
6
Select an option:
To begin navigation, select Do Course.
To view the course on the map and pan or zoom the map,
select Map.
To begin the course in reverse, select Do Course in
Reverse.
To view an elevation plot of the course, select Elevation
Plot.
To change the course name, select Name.
To edit the course path, select Edit.
To delete the course, select Delete.
Marking and Starting Navigation to a Man
Overboard Location
You can save a man overboard (MOB) location, and
automatically start navigation back to it.
TIP: You can customize the hold function of the keys to access
the MOB function (Customizing the Hot Keys, page 22).
1
From the watch face, press GPS.
2
Select an activity.
3
Hold MENU.
4
Select Navigation > Last MOB.
Navigation information appears.
Navigating with Sight 'N Go
You can point the device at an object in the distance, such as a
water tower, lock in the direction, and then navigate to the
object.
10 Navigation
1
From the watch face, press GPS.
2
Select an activity.
3
Hold MENU.
4
Select Navigation > Sight 'N Go.
5
Point the top of the watch at an object, and press GPS.
Navigation information appears.
6
Press GPS to begin navigation.
Navigating to Your Starting Point During an
Activity
You can navigate back to the starting point of your current
activity in a straight line or along the path you traveled. This
feature is available only for activities that use GPS.
1
During an activity, select GPS > Back to Start.
2
Select an option:
To navigate back to the starting point of your activity along
the path you traveled, select TracBack.
To navigate back to the starting point of your activity in a
straight line, select Straight Line.
Your current location , the track to follow , and your
destination appear on the map.
Navigating to the Starting Point of a Saved
Activity
You can navigate back to the starting point of a saved activity in
a straight line or along the path you traveled. This feature is
available only for activities that use GPS.
1
From the watch face, press GPS.
2
Select an activity.
3
Hold MENU.
4
Select Navigation > Activities.
5
Select an activity.
6
Select Back to Start, and select an option:
To navigate back to the starting point of your activity along
the path you traveled, select TracBack.
To navigate back to the starting point of your activity in a
straight line, select Straight Line.
A line appears on the map from your current location to the
starting point of the last saved activity.
NOTE: You can start the timer to prevent the device from
timing out to watch mode.
7
Press DOWN to view the compass (optional).
The arrow points toward your starting point.
Stopping Navigation
1
During an activity, hold MENU.
2
Select Stop Navigation.
Calculating the Size of an Area
Before you can calculate the size of an area, you must acquire
satellites.
1
From the watch face, press GPS.
2
Select Area Calc..
3
Walk around the perimeter of the area.
TIP: You can hold MENU, and select Pan/Zoom to adjust the
map (Panning and Zooming the Map, page 11).
4
Press GPS to calculate the area.
5
Select an option:
To exit without saving, select Done.
To convert measurements of the area to a different unit of
measure, select Change Units.
To save, select Save Activity.
Map
represents your location on the map. Location names and
symbols appear on the map. When you are navigating to a
destination, your route is marked with a line on the map.
Map navigation (Panning and Zooming the Map, page 11)
Map settings (Map Settings, page 21)
Panning and Zooming the Map
1
While navigating, press UP or DOWN to view the map.
2
Hold MENU.
3
Select Pan/Zoom.
4
Select an option:
To toggle between panning up and down, panning left and
right, or zooming, press GPS.
To pan or zoom the map, press UP and DOWN.
To quit, press BACK.
Compass
The device has a 3-axis compass with automatic calibration.
The compass features and appearance change depending on
your activity, whether GPS is enabled, and whether you are
navigating to a destination. You can change the compass
settings manually (Compass Settings, page 20). To open the
compass settings quickly, you can press GPS from the compass
widget.
Altimeter and Barometer
The device contains an internal altimeter and barometer. The
device collects elevation and pressure data continuously, even
in low-power mode. The altimeter displays your approximate
elevation based on pressure changes. The barometer displays
environmental pressure data based on the fixed elevation where
the altimeter was most recently calibrated (Altimeter Settings,
page 20). You can press GPS from the altimeter or barometer
widgets to open the altimeter or barometer settings quickly.
History
History includes time, distance, calories, average pace or speed,
lap data, and optional sensor information.
NOTE: When the device memory is full, your oldest data is
overwritten.
Using History
History contains previous activities you have saved on your
device.
1
Hold MENU.
2
Select History > Activities.
3
Select an activity.
4
Select an option:
To view additional information about the activity, select
Details.
History 11
To select a lap and view additional information about each
lap, select Laps.
To select an interval and view additional information about
each interval, select Intervals.
To select an exercise set and view additional information
about each set, select Sets.
To view the activity on a map, select Map.
To view your time in each heart rate zone, select Time in
Zone (Viewing Your Time in Each Heart Rate Zone,
page 12).
To view an elevation plot of the activity, select Elevation
Plot.
To delete the selected activity, select Delete.
Viewing Your Time in Each Heart Rate Zone
Before you can view heart rate zone data, you must complete an
activity with heart rate and save the activity.
Viewing your time in each heart rate zone can help you adjust
your training intensity.
1
From the watch face, hold MENU.
2
Select History > Activities.
3
Select an activity.
4
Select Time in Zone.
Viewing Data Totals
You can view the accumulated distance and time data saved to
your device.
1
From the watch face, hold MENU.
2
Select History > Totals.
3
If necessary, select an activity.
4
Select an option to view weekly or monthly totals.
Using the Odometer
The odometer automatically records the total distance traveled,
elevation gained, and time in activities.
1
From the watch face, hold MENU.
2
Select History > Totals > Odometer.
3
Press UP or DOWN to view odometer totals.
Syncing Activities
You can sync activities from other Garmin devices to your
Instinct Solar device using your Garmin Connect account. For
example, you can record a ride with an Edge
®
device, and view
your activity details on your Instinct Solar device.
1
Hold MENU.
2
Select History > Options > TrueUp > On.
When you sync your device with your smartphone, recent
activities from your other Garmin devices appear on your Instinct
Solar device.
Deleting History
1
From the watch face, hold MENU.
2
Select History > Options.
3
Select an option:
Select Delete All Activities to delete all activities from the
history.
Select Reset Totals to reset all distance and time totals.
NOTE: This does not delete any saved activities.
Connected Features
Connected features are available for your Instinct device when
you connect the device to a compatible smartphone using
Bluetooth technology. Some features require you to install the
Garmin Connect app on the connected smartphone. Go to
www.garmin.com/apps for more information.
Phone notifications: Displays phone notifications and
messages on your Instinct device.
LiveTrack: Allows friends and family to follow your races and
training activities in real time. You can invite followers using
email or social media, allowing them to view your live data on
a Garmin Connect tracking page.
Activity uploads to Garmin Connect: Automatically sends
your activity to your Garmin Connect account as soon as you
finish recording the activity.
Weather: Allows you to view current weather conditions and
weather forecasts.
Bluetooth sensors: Allows you to connect Bluetooth
compatible sensors, such as a heart rate monitor.
Find my phone: Locates your lost smartphone that is paired
with your Instinct device and currently within range.
Find my device: Locates your lost Instinct device that is paired
with your smarphone and currently within range.
Enabling Bluetooth Notifications
Before you can enable notifications, you must pair the Instinct
device with a compatible mobile device (Pairing Your
Smartphone with Your Device, page 1).
1
From the watch face, hold MENU.
2
Select Settings > Phone > Smart Notifications > Status >
On.
3
Select During Activity.
4
Select a notification preference.
5
Select a sound preference.
6
Select Not During Activity.
7
Select a notification preference.
8
Select a sound preference.
9
Select Timeout.
10
Select the amount of time the alert for a new notification
appears on the screen.
Viewing Notifications
1
From the watch face, press UP or DOWN to view the
notifications widget.
2
Press GPS.
3
Select a notification.
4
Press DOWN for more options.
5
Press BACK to return to the previous screen.
Managing Notifications
You can use your compatible smartphone to manage
notifications that appear on your Instinct Solar device.
Select an option:
If you are using an iPhone
®
device, go to the iOS
®
notifications settings to select the items to show on the
device.
If you are using an Android
smartphone, from the Garmin
Connect app, select Settings > Notifications.
Turning Off the Bluetooth Smartphone Connection
You can turn off the Bluetooth smartphone connection from the
controls menu.
12 Connected Features
NOTE: You can add options to the controls menu (Customizing
the Controls Menu, page 20).
1
Hold CTRL to view the controls menu.
2
Select to turn off the Bluetooth smartphone connection on
your Instinct device.
Refer to the owner's manual for your mobile device to turn off
Bluetooth technology on your mobile device.
Turning On and Off Smartphone Connection Alerts
You can set the Instinct Solar device to alert you when your
paired smartphone connects and disconnects using Bluetooth
technology.
NOTE: Smartphone connection alerts are turned off by default.
1
Hold MENU.
2
Select Settings > Phone > Alerts.
Locating a Lost Mobile Device
You can use this feature to help locate a lost mobile device that
is paired using Bluetooth technology and currently within range.
NOTE: You can add options to the controls menu (Customizing
the Controls Menu, page 20).
1
Hold CTRL to view the controls menu.
2
Select .
The Instinct device begins searching for your paired mobile
device. An audible alert sounds on your mobile device, and
the Bluetooth signal strength appears on the Instinct device
screen. The Bluetooth signal strength increases as you move
closer to your mobile device.
3
Press BACK to stop searching.
Garmin Connect
You can connect with your friends on your Garmin Connect
account. Your Garmin Connect account gives you the tools to
track, analyze, share, and encourage each other. Record the
events of your active lifestyle including runs, walks, rides, swims,
hikes, and more.
You can create your free Garmin Connect account when you
pair your device with your phone using the Garmin Connect app,
or you can go to connect.garmin.com.
Track your progress: You can track your daily steps, join a
friendly competition with your connections, and meet your
goals.
Store your activities: After you complete and save a timed
activity with your device, you can upload that activity to your
Garmin Connect account and keep it as long as you want.
Analyze your data: You can view more detailed information
about your activity, including time, distance, heart rate,
calories burned, and customizable reports.
Share your activities: You can connect with friends to follow
each other's activities or post links to your activities on your
favorite social networking sites.
Manage your settings: You can customize your device and
user settings on your Garmin Connect account.
Updating the Software Using the Garmin Connect App
Before you can update your device software using the Garmin
Connect app, you must have a Garmin Connect account, and
you must pair the device with a compatible smartphone (Pairing
Your Smartphone with Your Device, page 1).
Sync your device with the Garmin Connect app (Manually
Syncing Data with Garmin Connect, page 13).
When new software is available, the Garmin Connect app
automatically sends the update to your device.
Updating the Software Using Garmin Express
Before you can update your device software, you must
download and install the Garmin Express application and add
your device (Using Garmin Connect on Your Computer,
page 13).
1
Connect the device to your computer using the USB cable.
When new software is available, the Garmin Express
application sends it to your device.
2
After the Garmin Express application finishes sending the
update, disconnect the device from your computer.
Your device installs the update.
Using Garmin Connect on Your Computer
The Garmin Express application connects your device to your
Garmin Connect account using a computer. You can use the
Garmin Express application to upload your activity data to your
Garmin Connect account and to send data, such as workouts or
training plans, from the Garmin Connect website to your device.
1
Connect the device to your computer using the USB cable.
2
Go to www.garmin.com/express.
3
Download and install the Garmin Express application.
4
Open the Garmin Express application, and select Add
Device.
5
Follow the on-screen instructions.
Manually Syncing Data with Garmin Connect
NOTE: You can add options to the controls menu (Customizing
the Controls Menu, page 20).
1
Hold CTRL to view the controls menu.
2
Select .
Garmin Explore
The Garmin Explore website and mobile app allow you to plan
trips and use cloud storage for your waypoints, routes, and
tracks. They offer advanced planning both online and offline,
allowing you to share and sync data with your compatible
Garmin device. You can use the mobile app to download maps
for offline access, and then navigate anywhere without using
your cellular service.
You can download the Garmin Explore app from the app store
on your smartphone, or you can go to explore.garmin.com.
Heart Rate Features
The Instinct Solar device has a wrist-based heart rate monitor
and is also compatible with chest heart rate monitors (sold
separately). You can view heart rate data on the heart rate
widget. If both wrist-based heart rate and chest heart rate data
are available when you start an activity, your device uses the
chest heart rate data.
Heart Rate Features 13
Using the Stress Level Widget
The stress level widget displays your current stress level and a
graph of your stress level for the last several hours. It can also
guide you through a breathing activity to help you relax.
1
While you are sitting or inactive, press UP or DOWN from the
watch face to view the stress level widget.
2
Wait until the device begins the stress level reading.
TIP: If you are too active for the watch to determine your
stress level, a message appears instead of a stress level
number. You can check your stress level again after several
minutes of inactivity.
3
Press GPS to view a graph of your stress level for the last 2.5
hours.
4
To start a breathing activity, press DOWN > GPS, and enter
a duration for the breathing activity in minutes.
Wrist-based Heart Rate
Wearing the Device
Wear the device above your wrist bone.
NOTE: The device should be snug but comfortable. For more
accurate heart rate readings, the device should not move
while running or exercising. For pulse oximeter readings, you
should remain motionless.
NOTE: The optical sensor is located on the back of the
device.
See Tips for Erratic Heart Rate Data, page 14 for more
information about wrist-based heart rate.
See Tips for Erratic Pulse Oximeter Data, page 15 for more
information about the pulse oximeter sensor.
For more information about accuracy, go to garmin.com
/ataccuracy.
For more information about device wear and care, go to
www.garmin.com/fitandcare.
Tips for Erratic Heart Rate Data
If the heart rate data is erratic or does not appear, you can try
these tips.
Clean and dry your arm before putting on the device.
Avoid wearing sunscreen, lotion, and insect repellent under
the device.
Avoid scratching the heart rate sensor on the back of the
device.
Wear the device above your wrist bone. The device should
be snug but comfortable.
Wait until the icon is solid before starting your activity.
Warm up for 5 to 10 minutes and get a heart rate reading
before starting your activity.
NOTE: In cold environments, warm up indoors.
Rinse the device with fresh water after each workout.
Viewing the Heart Rate Widget
The widget displays your current heart rate in beats per minute
(bpm) and a graph of your heart rate for the last 4 hours.
1
From the watch face, select UP or DOWN to view the heart
rate widget.
NOTE: You may need to add the widget to your widget loop
(Customizing the Widget Loop, page 16).
2
Select GPS to view your average resting heart rate values for
the last 7 days.
Broadcasting Heart Rate Data to Garmin Devices
You can broadcast your heart rate data from your Instinct Solar
device and view it on paired Garmin devices.
NOTE: Broadcasting heart rate data decreases battery life.
1
From the heart rate widget, hold MENU.
2
Select Heart Rate Options > Broadcast Heart Rate.
The Instinct Solar device starts broadcasting your heart rate
data, and appears.
NOTE: You can view only the heart rate widget while
broadcasting heart rate data from the heart rate widget.
3
Pair your Instinct Solar device with your Garmin ANT+
®
compatible device.
NOTE: The pairing instructions differ for each Garmin
compatible device. See your owner's manual.
TIP: To stop broadcasting your heart rate data, press any
button, and select Yes.
Broadcasting Heart Rate Data During an Activity
You can set up your Instinct Solar device to broadcast your
heart rate data automatically when you begin an activity. For
example, you can broadcast your heart rate data to an Edge
device while cycling, or to a VIRB
®
action camera during an
activity.
NOTE: Broadcasting heart rate data decreases battery life.
1
From the heart rate widget, hold MENU.
2
Select Heart Rate Options > Broadcast During Activity.
3
Begin an activity (Starting an Activity, page 2).
The Instinct Solar device starts broadcasting your heart rate
data in the background.
NOTE: There is no indication that the device is broadcasting
your heart rate data during an activity.
4
Pair your Instinct Solar device with your Garmin ANT+
compatible device.
NOTE: The pairing instructions differ for each Garmin
compatible device. See your owner's manual.
TIP: To stop broadcasting your heart rate data, stop the
activity (Stopping an Activity, page 2).
Setting an Abnormal Heart Rate Alert
CAUTION
This feature only alerts you when your heart rate exceeds or
drops below a certain number of beats per minute, as selected
by the user, after a period of inactivity. This feature does not
14 Heart Rate Features
notify you of any potential heart condition and is not intended to
treat or diagnose any medical condition or disease. Always defer
to your health care provider for any heart-related issues.
You can set the heart rate threshold value.
1
From the heart rate widget, hold MENU.
2
Select Heart Rate Options > Abnormal Heart Rate Alerts.
3
Select High Alert or Low Alert.
4
Set the heart rate threshold value.
Each time your heart rate exceeds or drops below the threshold
value, a message appears and the device vibrates.
Turning Off the Wrist-based Heart Rate Monitor
The default value for the Wrist Heart Rate setting is Auto. The
device automatically uses the wrist-based heart rate monitor
unless you pair an ANT+ heart rate monitor to the device.
NOTE: Disabling the wrist-based heart rate monitor also
disables the wrist-based pulse oximeter sensor. You can
perform a manual reading from the pulse oximeter widget.
1
From the heart rate widget, hold MENU.
2
Select Heart Rate Options > Status > Off.
Body Battery
Your device analyzes your heart rate variability, stress level,
sleep quality, and activity data to determine your overall Body
Battery level. Like a gas gauge on a car, it indicates your
amount of available reserve energy. The Body Battery level
range is from 0 to 100, where 0 to 25 is low reserve energy, 26
to 50 is medium reserve energy, 51 to 75 is high reserve energy,
and 76 to 100 is very high reserve energy.
You can sync your device with your Garmin Connect account to
view your most up-to-date Body Battery level, long-term trends,
and additional details (Tips for Improved Body Battery Data,
page 15).
Viewing the Body Battery Widget
The Body Battery widget displays your current Body Battery
level and a graph of your Body Battery level for the last several
hours.
1
Press UP or DOWN to view the Body Battery widget.
NOTE: You may need to add the widget to your widget loop
(Customizing the Widget Loop, page 16).
2
Press GPS to view a combined graph of your Body Battery
and stress levels.
3
Press DOWN to see your Body Battery data since midnight.
Tips for Improved
Body Battery Data
Your Body Battery level updates when you sync your device
with your Garmin Connect account.
For more accurate results, wear the device while sleeping.
Rest and good sleep charge your Body Battery.
Strenuous activity, high stress, and poor sleep can cause
your Body Battery to drain.
Food intake, as well as stimulants like caffeine, has no
impact on your Body Battery.
Pulse Oximeter
The Instinct Solar device has a wrist-based pulse oximeter to
gauge the saturation of oxygen in your blood. Knowing your
oxygen saturation can help you determine how your body is
adapting to exercise and stress. Your device gauges your blood
oxygen level by shining light into the skin and checking how
much light is absorbed. This is referred to as SpO
2
.
On the device, your pulse oximeter readings appear as an SpO
2
percentage. On your Garmin Connect account, you can view
additional details about your pulse oximeter readings, including
trends over multiple days (Turning On Pulse Oximeter Sleep
Tracking, page 15). For more information on pulse oximeter
accuracy, go to garmin.com/ataccuracy.
Getting Pulse Oximeter Readings
You can manually begin a pulse oximeter reading by viewing the
pulse oximeter widget. The widget displays your most recent
blood oxygen saturation percentage.
1
While you are sitting or inactive, press UP or DOWN to view
the pulse oximeter widget.
2
Wait until the device begins the pulse oximeter reading.
3
Remain motionless for up to 30 seconds.
NOTE: If you are too active for the watch to get a pulse
oximeter reading, a message appears instead of a
percentage. You can check again after several minutes of
inactivity. For best results, hold the arm wearing the device at
heart level while the device reads your blood oxygen
saturation.
Turning On Pulse Oximeter Sleep Tracking
You can set your device to continuously measure your blood
oxygen saturation while you sleep.
NOTE: Unusual sleep positions can cause abnormally low
sleep-time SpO2 readings.
1
From the pulse oximeter widget, hold MENU.
2
Select Sleep Pulse Ox > On.
Tips for Erratic Pulse Oximeter Data
If the pulse oximeter data is erratic or does not appear, you can
try these tips.
Remain motionless while the device reads your blood oxygen
saturation.
Wear the device above your wrist bone. The device should
be snug but comfortable.
Pulse Oximeter 15
Hold the arm wearing the device at heart level while the
device reads your blood oxygen saturation.
Use a silicone band.
Clean and dry your arm before putting on the device.
Avoid wearing sunscreen, lotion, and insect repellent under
the device.
Avoid scratching the optical sensor on the back of the device.
Rinse the device with fresh water after each workout.
Customizing Your Device
Widgets
Your device comes preloaded with widgets that provide at-a-
glance information. Some widgets require a Bluetooth
connection to a compatible smartphone.
Some widgets are not visible by default. You can add them to
the widget loop manually (Customizing the Widget Loop,
page 16).
ABC: Displays combined altimeter, barometer, and compass
information.
Alternate time zones: Displays the current time of day in
additional time zones.
Body Battery: With all day wear, displays your current Body
Battery level and a graph of your level for the last several
hours.
Calendar: Displays upcoming meetings from your smartphone
calendar.
Calories: Displays your calorie information for the current day.
Dog tracking: Displays your dog's location information when
you have a compatible dog tracking device paired with your
Instinct device.
Floors climbed: Tracks your floors climbed and progress
toward your goal.
Heart rate: Displays your current heart rate in beats per minute
(bpm) and a graph of your average resting heart rate (RHR).
Intensity minutes: Tracks your time spent participating in
moderate to vigorous activities, your weekly intensity minutes
goal, and progress toward your goal.
inReach
®
controls: Allows you to send messages on your
paired inReach device.
Last activity: Displays a brief summary of your last recorded
activity, such as your last run, last ride, or last swim.
Last sport: Displays a brief summary of your last recorded
sport.
Moon Phase: Displays the moonrise and moonset times, along
with the moon phase, based on your GPS position.
Music controls: Provides music player controls for your
smartphone.
My day: Displays a dynamic summary of your activity today. The
metrics include timed activities, intensity minutes, floors
climbed, steps, calories burned, and more.
Notifications: Alerts you to incoming calls, texts, social network
updates, and more, based on your smartphone notification
settings.
Pulse oximeter: Allows you to take a manual pulse oximeter
reading.
Solar intensity: Displays a graph of the intensity of solar input
for the last 6 hours.
Steps: Tracks your daily step count, step goal, and data for
previous days.
Stress: Displays your current stress level and a graph of your
stress level. You can do a breathing activity to help you relax.
Sunrise and sunset: Displays sunrise, sunset, and civil twilight
times.
VIRB controls: Provides camera controls when you have a
VIRB device paired with your Instinct device.
Weather: Displays the current temperature and weather
forecast.
Xero
®
device: Displays laser location information when you
have a compatible Xero device paired with your Instinct
device.
Customizing the Widget Loop
You can change the order of widgets in the widget loop, remove
widgets, and add new widgets.
1
From the watch face, hold MENU.
2
Select Settings > Widgets.
3
Select a widget.
4
Select an option:
Select Reorder to change the location of the widget in the
widget loop.
Select Remove to remove the widget from the widget
loop.
5
Select Add Widgets.
6
Select a widget.
The widget is added to the widget loop.
inReach Remote
The inReach remote function allows you to control your inReach
device using your Instinct device. Go to buy.garmin.com to
purchase an inReach device.
Using the inReach Remote
Before you can use the inReach remote function, you must add
the inReach widget to the widget loop (Customizing the Widget
Loop, page 16).
1
Turn on the inReach device.
2
On your Instinct watch, press UP or DOWN from the watch
face to view the inReach widget.
3
Press GPS to search for your inReach device.
4
Press GPS to pair your inReach device.
5
Press GPS, and select an option:
To send an SOS message, select Initiate SOS.
NOTE: You should only use the SOS function in a real
emergency situation.
To send a text message, select Messages > New
Message, select the message contacts, and enter the
message text or select a quick text option.
To send a preset message, select Send Preset, and
select a message from the list.
To view the timer and distance traveled during an activity,
select Tracking.
VIRB Remote
The VIRB remote function allows you to control your VIRB
action camera using your device. Go to www.garmin.com/VIRB
to purchase a VIRB action camera.
Controlling a VIRB Action Camera
Before you can use the VIRB remote function, you must enable
the remote setting on your VIRB camera. See the VIRB Series
Owner's Manual for more information.
1
Turn on your VIRB camera.
2
Pair your VIRB camera with your Instinct watch (Pairing Your
Wireless Sensors, page 22).
The VIRB widget is automatically added to the widget loop.
16 Customizing Your Device
3
Press UP or DOWN from the watch face to view the VIRB
widget.
4
If necessary, wait while your watch connects to your camera.
5
Select an option:
To record video, select Start Recording.
The video counter appears on the Instinct screen.
To take a photo while recording video, press DOWN.
To stop recording video, press GPS.
To take a photo, select Take Photo.
To take multiple photos in burst mode, select Take Burst.
To send the camera to sleep mode, select Sleep Camera.
To wake the camera from sleep mode, select Wake
Camera.
To change video and photo settings, select Settings.
Controlling a VIRB Action Camera During an Activity
Before you can use the VIRB remote function, you must enable
the remote setting on your VIRB camera. See the VIRB Series
Owner's Manual for more information.
1
Turn on your VIRB camera.
2
Pair your VIRB camera with your Instinct watch (Pairing Your
Wireless Sensors, page 22).
When the camera is paired, a VIRB data screen is
automatically added to activities.
3
During an activity, press UP or DOWN to view the VIRB data
screen.
4
If necessary, wait while your watch connects to your camera.
5
Hold MENU.
6
Select VIRB Remote.
7
Select an option:
To control the camera using the activity timer, select
Settings > Recording Mode > Timer Start/Stop.
NOTE: Video recording automatically starts and stops
when you start and stop an activity.
To control the camera using the menu options, select
Settings > Recording Mode > Manual.
To manually record video, select Start Recording.
The video counter appears on the Instinct screen.
To take a photo while recording video, press DOWN.
To manually stop recording video, press GPS.
To take multiple photos in burst mode, select Take Burst.
To send the camera to sleep mode, select Sleep Camera.
To wake the camera from sleep mode, select Wake
Camera.
Activities and App Settings
These settings allow you to customize each preloaded activity
app based on your needs. For example, you can customize data
pages and enable alerts and training features. Not all settings
are available for all activity types.
Hold MENU, select Settings > Activities & Apps, select an
activity, and select the activity settings.
3D Distance: Calculates your distance traveled using your
elevation change and your horizontal movement over ground.
3D Speed: Calculates your speed using your elevation change
and your horizontal movement over ground (3D Speed and
Distance, page 19).
Alerts: Sets the training or navigation alerts for the activity.
Auto Climb: Enables the device to detect elevation changes
automatically using the built-in altimeter.
Auto Lap: Sets the options for the Auto Lap
®
feature (Auto Lap,
page 18).
Auto Pause: Sets the device to stop recording data when you
stop moving or when you drop below a specified speed
(Enabling Auto Pause
®
, page 18).
Auto Rest: Enables the device to automatically detect when you
are resting during a pool swim and create a rest interval
(Auto Rest, page 5).
Auto Run: Enables the device to detect ski runs automatically
using the built-in accelerometer.
Auto Scroll: Enables you to move through all of the activity data
screens automatically while the timer is running (Using Auto
Scroll, page 19).
Background Color: Sets the background color of each activity
to black or white.
Countdown Start: Enables a countdown timer for pool
swimming intervals.
Data Screens: Enables you to customize data screens and add
new data screens for the activity (Customizing the Data
Screens, page 17).
GPS: Sets the mode for the GPS antenna. Using the GPS +
GLONASS or GPS + GALILEO options provides increased
performance in challenging environments and faster position
acquisition. Using the GPS and another satellite together can
reduce battery life more than using the GPS option only.
Using the UltraTrac option records track points and sensor
data less frequently (UltraTrac, page 19).
Lap Key: Enables you to record a lap, set, or a rest during the
activity (Turning On and Off the Lap Key, page 19).
Metronome: Plays tones at a steady rhythm to help you
improve your performance by training at a faster, slower, or
more consistent cadence (Using the Metronome, page 4).
Pool Size: Sets the pool length for pool swimming.
Power Mode: Sets the default power mode for the activity.
Power Save Timeout: Sets the power-save timeout options for
the activity (Power Save Timeout Settings, page 19).
Record After Sunset: Sets the device to record track points
after sunset during an expedition.
Recording Interval: Sets the frequency for recording track
points during an expedition (Changing the Track Point
Recording Interval, page 4).
Rename: Sets the activity name.
Restore Defaults: Allows you to reset the activity settings.
Stroke Detect.: Enables stroke detection for pool swimming.
Customizing the Data Screens
You can show, hide, and change the layout and content of data
screens for each activity.
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select the activity to customize.
4
Select the activity settings.
5
Select Data Screens.
6
Select a data screen to customize.
7
Select an option:
Select Layout to adjust the number of data fields on the
data screen.
Select a field to change the data that appears in the field.
Select Reorder to change the location of the data screen
in the loop.
Select Remove to remove the data screen from the loop.
8
If necessary, select Add to add a data screen to the loop.
Customizing Your Device 17
You can add a custom data screen, or select one of the
predefined data screens.
Adding a Map to an Activity
You can add the map to the data screens loop for an activity.
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select the activity to customize.
4
Select the activity settings.
5
Select Data Screens > Add > Map.
Alerts
You can set alerts for each activity, which can help you to train
toward specific goals, to increase your awareness of your
environment, and to navigate to your destination. Some alerts
are available only for specific activities. There are three types of
alerts: event alerts, range alerts, and recurring alerts.
Event alert: An event alert notifies you once. The event is a
specific value. For example, you can set the device to alert
you when you reach a specified elevation.
Range alert: A range alert notifies you each time the device is
above or below a specified range of values. For example, you
can set the device to alert you when your heart rate is below
60 beats per minute (bpm) and over 210 bpm.
Recurring alert: A recurring alert notifies you each time the
device records a specified value or interval. For example, you
can set the device to alert you every 30 minutes.
Alert Name Alert Type Description
Cadence Range You can set minimum and maximum
cadence values.
Calories Event,
recurring
You can set the number of calories.
Custom Event,
recurring
You can select an existing message or
create a custom message and select an
alert type.
Distance Recurring You can set a distance interval.
Elevation Range You can set minimum and maximum
elevation values.
Heart Rate Range You can set minimum and maximum heart
rate values or select zone changes. See
About Heart Rate Zones, page 5 and
Heart Rate Zone Calculations, page 6.
Pace Range You can set minimum and maximum pace
values.
Proximity Event You can set a radius from a saved
location.
Run/Walk Recurring You can set timed walking breaks at
regular intervals.
Speed Range You can set minimum and maximum
speed values.
Stroke Rate Range You can set high or low strokes per
minute.
Time Event,
recurring
You can set a time interval.
Setting an Alert
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Alerts.
6
Select an option:
Select Add New to add a new alert for the activity.
Select the alert name to edit an existing alert.
7
If necessary, select the type of alert.
8
Select a zone, enter the minimum and maximum values, or
enter a custom value for the alert.
9
If necessary, turn on the alert.
For event and recurring alerts, a message appears each time
you reach the alert value. For range alerts, a message appears
each time you exceed or drop below the specified range
(minimum and maximum values).
Auto Lap
Marking Laps by Distance
You can use Auto Lap to mark a lap at a specific distance
automatically. This feature is helpful for comparing your
performance over different parts of an activity (for example,
every 1 mile or 5 kilometers).
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Lap.
6
Select an option:
Select Auto Lap to turn Auto Lap on or off.
Select Auto Distance to adjust the distance between
laps.
Each time you complete a lap, a message appears that displays
the time for that lap. The device also beeps or vibrates if audible
tones are turned on (System Settings, page 22).
If necessary, you can customize the data pages to display
additional lap data (Customizing the Data Screens, page 17).
Customizing the Lap Alert Message
You can customize one or two data fields that appear in the lap
alert message.
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Lap > Lap Alert.
6
Select a data field to change it.
7
Select Preview (optional).
Enabling Auto Pause
®
You can use the Auto Pause feature to pause the timer
automatically when you stop moving. This feature is helpful if
your activity includes stop lights or other places where you must
stop.
NOTE: History is not recorded while the timer is stopped or
paused.
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Pause.
6
Select an option:
To pause the timer automatically when you stop moving,
select When Stopped.
To pause the timer automatically when your pace or
speed drops below a specified level, select Custom.
18 Customizing Your Device
Enabling Auto Climb
You can use the auto climb feature to detect elevation changes
automatically. You can use it during activities such as climbing,
hiking, running, or biking.
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Climb > Status > On.
6
Select an option:
Select Run Screen to identify which data screen appears
while running.
Select Climb Screen to identify which data screen
appears while climbing.
Select Invert Colors to reverse the display colors when
changing modes.
Select Vertical Speed to set the rate of ascent over time.
Select Mode Switch to set how quickly the device
changes modes.
3D Speed and Distance
You can set 3D speed and distance to calculate your speed or
distance using both your elevation change and your horizontal
movement over ground. You can use it during activities such as
skiing, climbing, navigating, hiking, running, or biking.
Turning On and Off the Lap Key
You can turn on the Lap Key setting to record a lap or a rest
during an activity using BACK. You can turn off the Lap Key
setting to avoid recording laps due to accidental key presses
during an activity.
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select an activity.
4
Select the activity settings.
5
Select Lap Key.
The lap key status changes to On or Off based on the current
setting.
Using Auto Scroll
You can use the auto scroll feature to cycle through all of the
activity data screens automatically while the timer is running.
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select an activity.
NOTE: This feature is not available for all activities.
4
Select the activity settings.
5
Select Auto Scroll.
6
Select a display speed.
Changing the GPS Setting
For more information about GPS, go to www.garmin.com
/aboutGPS.
1
Hold MENU.
2
Select Settings > Activities & Apps.
3
Select the activity to customize.
4
Select the activity settings.
5
Select GPS.
6
Select an option:
Select Off to disable GPS for the activity.
Select Normal (GPS Only) to enable the GPS satellite
system.
Select GPS + GLONASS (Russian satellite system) for
more accurate position information in situations with poor
sky visibility.
Select GPS + GALILEO (European Union satellite
system) for more accurate position information in
situations with poor sky visibility.
Select UltraTrac to record track points and sensor data
less frequently (UltraTrac, page 19).
NOTE: Using GPS and another satellite together can reduce
battery life more quickly than using GPS only (GPS and
Other Satellite Systems, page 19).
GPS and Other Satellite Systems
Using GPS and another satellite system together offers
increased performance in challenging environments and faster
position acquisition than using GPS only. However, using
multiple systems can reduce battery life more quickly than using
GPS only.
Your device can use these Global Navigation Satellite Systems
(GNSS).
GPS: A satellite constellation built by the United States.
GLONASS: A satellite constellation built by Russia.
GALILEO: A satellite constellation built by the European Space
Agency.
UltraTrac
The UltraTrac feature is a GPS setting that records track points
and sensor data less frequently. Enabling the UltraTrac feature
increases battery life but decreases the quality of recorded
activities. You should use the UltraTrac feature for activities that
demand longer battery life and for which frequent sensor data
updates are less important.
Power Save Timeout Settings
The timeout settings affect how long your device stays in
training mode, for example, when you are waiting for a race to
start. Hold MENU, select Settings > Activities & Apps, select
an activity, and select the activity settings. Select Power Save
Timeout to adjust the timeout settings for the activity.
Normal: Sets the device to enter low-power watch mode after 5
minutes of inactivity.
Extended: Sets the device to enter low-power watch mode after
25 minutes of inactivity. The extended mode can result in
shorter battery life between charges.
Customizing Your Activity List
1
From the watch face, hold MENU.
2
Select Settings > Activities & Apps.
3
Select an option:
Select an activity to customize the settings, set the activity
as a favorite, change the order of appearance, and more.
Select Add to add more activities or create custom
activities.
Removing an Activity or App
1
From the watch face, hold MENU.
2
Select Settings > Activities & Apps.
3
Select an activity.
4
Select an option:
To remove an activity from your list of favorites, select
Remove from Favorites.
To delete the activity from the apps list, select Remove.
Customizing Your Device 19
Customizing the Controls Menu
You can add, remove, and change the order of the shortcut
menu options in the controls menu (Viewing the Controls Menu,
page 1).
1
From the watch face, hold MENU.
2
Select Settings > Controls.
3
Select a shortcut to customize.
4
Select an option:
Select Reorder to change the location of the shortcut in
the controls menu.
Select Remove to remove the shortcut from the controls
menu.
5
If necessary, select Add New to add an additional shortcut to
the controls menu.
Customizing the Watch Face
You can customize the watch face information and appearance.
1
From the watch face, hold MENU.
2
Select Watch Face.
3
Press UP or DOWN to preview the watch face options.
4
Press GPS.
5
Select an option:
To activate the watch face, select Apply.
To customize the data that appears on the watch face,
select Customize, press UP or DOWN to preview the
options, and press GPS.
Sensors Settings
Compass Settings
Hold MENU, and select Settings > Sensors & Accessories >
Compass.
Calibrate: Allows you to manually calibrate the compass sensor
(Calibrating the Compass Manually, page 20).
Display: Sets the directional heading on the compass to
degrees or milliradians.
North Ref.: Sets the north reference of the compass (Setting the
North Reference, page 20).
Mode: Sets the compass to use electronic-sensor data only
(On), a combination of GPS and electronic-sensor data when
moving (Auto), or GPS data only (Off).
Calibrating the Compass Manually
NOTICE
Calibrate the electronic compass outdoors. To improve heading
accuracy, do not stand near objects that influence magnetic
fields, such as vehicles, buildings, and overhead power lines.
Your device was already calibrated at the factory, and the
device uses automatic calibration by default. If you experience
irregular compass behavior, for example, after moving long
distances or after extreme temperature changes, you can
manually calibrate the compass.
1
Hold MENU.
2
Select Settings > Sensors & Accessories > Compass >
Calibrate > Start.
3
Follow the on-screen instructions.
TIP: Move your wrist in a small figure eight motion until a
message appears.
Setting the North Reference
You can set the directional reference used in calculating
heading information.
1
Hold MENU.
2
Select Settings > Sensors & Accessories > Compass >
North Ref..
3
Select an option:
To set geographic north as the heading reference, select
True.
To set the magnetic declination for your location
automatically, select Magnetic.
To set grid north (000º) as the heading reference, select
Grid.
To set the magnetic variation value manually, select User,
enter the magnetic variance, and select Done.
Altimeter Settings
Hold MENU, and select Settings > Sensors & Accessories >
Altimeter.
Calibrate: Allows you to manually calibrate the altimeter sensor.
Auto Cal.: Allows the altimeter to self-calibrate each time you
turn on GPS tracking.
Elevation: Sets the units of measure for elevation.
Calibrating the Barometric Altimeter
Your device was already calibrated at the factory, and the
device uses automatic calibration at your GPS starting point by
default. You can manually calibrate the barometric altimeter if
you know the correct elevation.
1
Hold MENU.
2
Select Settings > Sensors & Accessories > Altimeter.
3
Select an option:
To calibrate automatically from your GPS starting point,
select Auto Cal., and select an option.
To enter the current elevation manually, select Calibrate >
Yes.
To enter the current elevation from the digital elevation
model, select Calibrate > Use DEM.
NOTE: Some devices require a phone connection to use
DEM for calibration.
To enter the current elevation from your GPS starting
point, select Calibrate > Use GPS.
Barometer Settings
Hold MENU, and select Settings > Sensors & Accessories >
Barometer.
Calibrate: Allows you to manually calibrate the barometer
sensor.
Plot: Sets the time scale for the chart in the barometer widget.
Storm Alert: Sets the rate of barometric pressure change that
triggers a storm alert.
Watch Mode: Sets the sensor used in watch mode. The Auto
option uses both the altimeter and barometer according to
your movement. You can use the Altimeter option when your
activity involves changes in altitude, or the Barometer option
when your activity does not involve changes in altitude.
Pressure: Sets how the device displays pressure data.
Calibrating the Barometer
Your device was already calibrated at the factory, and the
device uses automatic calibration at your GPS starting point by
default. You can manually calibrate the barometer if you know
the correct elevation or the correct sea level pressure.
1
Hold MENU.
2
Select Settings > Sensors & Accessories > Barometer >
Calibrate.
3
Select an option:
To enter the current elevation and sea level pressure
(optional), select Yes.
20 Customizing Your Device
To calibrate automatically from the digital elevation model,
select Use DEM.
NOTE: Some devices require a phone connection to use
DEM for calibration.
To calibrate automatically from your GPS starting point,
select Use GPS.
Xero Laser Location Settings
Before you can customize laser location settings, you must pair
a compatible Xero device (Pairing Your Wireless Sensors,
page 22).
Hold MENU, and select Sensors & Accessories > XERO
Laser Locations > Laser Locations.
During Activity: Enables the display of laser location
information from a compatible, paired Xero device during an
activity.
Share Mode: Allows you to share laser location information
publicly or broadcast it privately.
Map Settings
You can customize how the map appears in the map app and
data screens.
From the watch face, hold MENU, and select Settings > Map.
Orientation: Sets the orientation of the map. The North Up
option shows north at the top of the screen. The Track Up
option shows your current direction of travel at the top of the
screen.
User Locations: Shows or hides saved locations on the map.
Auto Zoom: Automatically selects the zoom level for optimal
use of your map. When disabled, you must zoom in or out
manually.
Navigation Settings
You can customize the map features and appearance when
navigating to a destination.
Customizing Map Features
1
Hold MENU.
2
Select Settings > Navigation > Data Screens.
3
Select an option:
Select Map to turn on or off the map.
Select Elevation Plot to turn on or off the elevation plot.
Select a screen to add, remove, or customize.
Heading Settings
You can set the behavior of the pointer that appears when
navigating.
Hold MENU, and select Settings > Navigation > Type.
Bearing: Points in the direction of your destination.
Course: Shows your relationship to the course line leading to
the destination.
Setting Navigation Alerts
You can set alerts to help you navigate to your destination.
1
Hold MENU.
2
Select Settings > Navigation > Alerts.
3
Select an option:
To set an alert for a specified distance from your final
destination, select Final Distance.
To set an alert for the estimated time remaining until you
reach your final destination, select Final ETE.
To set an alert when you stray from the course, select Off
Course.
4
If necessary, select Status to turn on the alert.
5
If necessary, enter a distance or time value, and select .
Power Manager Settings
Hold MENU, and select Settings > Power Manager.
Battery Saver: Allows you to customize system settings to
extend battery life in watch mode (Customizing the Battery
Saver Feature, page 21).
Power Modes: Allows you to customize system settings, activity
settings, and GPS settings to extend battery life during an
activity (Customizing Power Modes, page 21).
Customizing the Battery Saver Feature
The battery saver feature allows you to quickly adjust system
settings to extend battery life in watch mode.
You can turn on the battery saver feature from the controls
menu (Viewing the Controls Menu, page 1).
1
Hold MENU.
2
Select Settings > Power Manager > Battery Saver.
3
Select Status to turn on the battery saver feature.
4
Select Edit, and select an option:
Select Watch Face to enable a low-power watch face that
updates once per minute.
Select Phone to disconnect your paired phone.
Select Activity Tracking to turn off all-day activity
tracking, including steps, floors climbed, intensity minutes,
sleep tracking, and Move IQ events.
Select Wrist Heart Rate to turn off the wrist heart rate
monitor.
Select Backlight to disable the automatic backlight.
The watch displays the hours of battery life gained with each
setting change.
5
Select During Sleep to enable the battery saver feature
during your normal sleep hours.
TIP: You can set your normal sleep hours in the user settings
on your Garmin Connect account.
6
Select Low Battery Alert to receive an alert when the battery
is low.
Customizing Power Modes
Your device comes preloaded with several power modes,
allowing you to quickly adjust system settings, activity settings,
and GPS settings to extend battery life during an activity. You
can customize existing power modes and create new custom
power modes.
1
Hold MENU.
2
Select Settings > Power Manager > Power Modes.
3
Select an option:
Select a power mode to customize.
Select Add to create a custom power mode.
4
If necessary, enter a custom name.
5
Select an option to customize specific power mode settings.
For example, you can change the GPS setting or disconnect
your paired phone.
The watch displays the hours of battery life gained with each
setting change.
6
If necessary, select Done to save and use the custom power
mode.
Restoring a Power Mode
You can reset a preloaded power mode to the factory default
settings.
1
Hold MENU.
2
Select Settings > Power Manager > Power Modes.
Customizing Your Device 21
3
Select a preloaded power mode.
4
Select Restore > Yes.
System Settings
Hold MENU, and select Settings > System.
Language: Sets the language displayed on the device.
Time: Adjusts the time settings (Time Settings, page 22).
Backlight: Adjusts the backlight settings (Changing the
Backlight Settings, page 22).
Sounds: Sets the device sounds, such as key tones, alerts, and
vibrations.
Do Not Disturb: Turns on or off do not disturb mode. Use the
During Sleep option to turn on do not disturb mode
automatically during your normal sleep hours. You can set
your normal sleep hours on your Garmin Connect account.
Hot Keys: Allows you to assign shortcuts to device keys
(Customizing the Hot Keys, page 22).
Auto Lock: Allows you to lock the keys automatically to prevent
accidental key presses. Use the During Activity option to lock
the keys during a timed activity. Use the Not During Activity
option to lock the keys when you are not recording a timed
activity.
Units: Sets the units of measure used on the device (Changing
the Units of Measure, page 22).
Format: Sets general format preferences, such as the pace and
speed shown during activities, the start of the week, and
geographical position format and datum options.
Data Recording: Sets how the device records activity data. The
Smart recording option (default) allows for longer activity
recordings. The Every Second recording option provides
more detailed activity recordings, but may not record entire
activities that last for longer periods of time.
USB Mode: Sets the device to use mass storage mode or
Garmin mode when connected to a computer.
Reset: Allows you to reset user data and settings (Resetting All
Default Settings, page 25).
Software Update: Allows you to install software updates
downloaded using Garmin Express.
Time Settings
Hold MENU, and select Settings > System > Time.
Time Format: Sets the device to show time in a 12-hour, 24-
hour, or military format.
Set Time: Sets the time zone for the device. The Auto option
sets the time zone automatically based on your GPS position.
Time: Allows you to adjust the time if it is set to the Manual
option.
Alerts: Allows you to set hourly alerts, as well as sunrise and
sunset alerts that sound a specific number of minutes or
hours before the actual sunrise or sunset occurs.
Sync With GPS: Allows you to manually sync the time with GPS
when you change time zones, and to update for daylight
saving time.
Changing the Backlight Settings
1
From the watch face, hold MENU.
2
Select Settings > System > Backlight.
3
Select an option:
Select During Activity.
Select Not During Activity.
4
Select an option:
Select Keys to turn on the backlight for key presses.
Select Alerts to turn on the backlight for alerts.
Select Gesture to turn on the backlight by raising and
turning your arm to look at your wrist.
Select Timeout to set the length of time before the
backlight turns off.
Select Brightness to set the brightness level of the
backlight.
Customizing the Hot Keys
You can customize the hold function of individual keys and
combinations of keys.
1
From the watch face, hold MENU.
2
Select Settings > System > Hot Keys.
3
Select a key or combination of keys to customize.
4
Select a function.
Changing the Units of Measure
You can customize the units of measure displayed on the
device.
1
From the watch face, hold MENU.
2
Select Settings > System > Units.
3
Select a measurement type.
4
Select a unit of measure.
Viewing Device Information
You can view device information, such as the unit ID, software
version, regulatory information, and license agreement.
1
From the watch face, hold MENU.
2
Select Settings > About.
Viewing E-label Regulatory and Compliance
Information
The label for this device is provided electronically. The e-label
may provide regulatory information, such as identification
numbers provided by the FCC or regional compliance markings,
as well as applicable product and licensing information.
1
From the watch face, hold MENU.
2
Select Settings > About.
Wireless Sensors
Your device can be used with wireless ANT+ or Bluetooth
sensors. For more information about compatibility and
purchasing optional sensors, go to buy.garmin.com.
Pairing Your Wireless Sensors
The first time you connect a wireless sensor to your device
using ANT+ or Bluetooth technology, you must pair the device
and sensor. After they are paired, the device connects to the
sensor automatically when you start an activity and the sensor is
active and within range.
1
If you are pairing a heart rate monitor, put on the heart rate
monitor.
The heart rate monitor does not send or receive data until
you put it on.
2
Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other wireless sensors
while pairing.
3
Hold MENU.
4
Select Settings > Sensors & Accessories > Add New.
5
Select an option:
Select Search All.
Select your sensor type.
22 Wireless Sensors
After the sensor is paired with your device, the sensor status
changes from Searching to Connected. Sensor data appears
in the data screen loop or a custom data field.
Using an Optional Bike Speed or Cadence
Sensor
You can use a compatible bike speed or cadence sensor to
send data to your device.
Pair the sensor with your device (Pairing Your Wireless
Sensors, page 22).
Set your wheel size (Wheel Size and Circumference,
page 28).
Go for a ride (Starting an Activity, page 2).
Foot Pod
Your device is compatible with the foot pod. You can use the
foot pod to record pace and distance instead of using GPS when
you are training indoors or when your GPS signal is weak. The
foot pod is on standby and ready to send data (like the heart
rate monitor).
After 30 minutes of inactivity, the foot pod powers off to
conserve the battery. When the battery is low, a message
appears on your device. Approximately five hours of battery life
remain.
Improving Foot Pod Calibration
Before you can calibrate your device, you must acquire GPS
signals and pair your device with the foot pod (Pairing Your
Wireless Sensors, page 22).
The foot pod is self-calibrating, but you can improve the
accuracy of the speed and distance data with a few outdoor runs
using GPS.
1
Stand outside for 5 minutes with a clear view of the sky.
2
Start a running activity.
3
Run on a track without stopping for 10 minutes.
4
Stop your activity, and save it.
Based on the recorded data, the foot pod calibration value
changes, if necessary. You should not need to calibrate the
foot pod again unless your running style changes.
Calibrating Your Foot Pod Manually
Before you can calibrate your device, you must pair your device
with the foot pod sensor (Pairing Your Wireless Sensors,
page 22).
Manual calibration is recommended if you know your calibration
factor. If you have calibrated a foot pod with another Garmin
product, you may know your calibration factor.
1
From the watch face, hold MENU.
2
Select Settings > Sensors & Accessories.
3
Select your foot pod.
4
Select Cal. Factor > Set Value.
5
Adjust the calibration factor:
Increase the calibration factor if your distance is too low.
Decrease the calibration factor if your distance is too high.
Setting Foot Pod Speed and Distance
Before you can customize the foot pod speed and distance, you
must pair your device with the foot pod sensor (Pairing Your
Wireless Sensors, page 22).
You can set your device to calculate speed and distance using
your foot pod data instead of GPS data.
1
From the watch face, hold MENU.
2
Select Settings > Sensors & Accessories.
3
Select your foot pod.
4
Select Speed or Distance.
5
Select an option:
Select Indoor when you are training with GPS turned off,
usually indoors.
Select Always to use your foot pod data regardless of the
GPS setting.
tempe
The tempe is an ANT+ wireless temperature sensor. You can
attach the sensor to a secure strap or loop where it is exposed
to ambient air, and therefore, provides a consistent source of
accurate temperature data. You must pair the tempe with your
device to display temperature data from the tempe.
Device Information
Specifications
Battery type Rechargeable, built-in lithium-ion battery
Battery life Up to 24 days in smartwatch mode
Water rating 10 ATM
1
Operating and storage
temperature range
From -20º to 60ºC (from -4º to 140ºF)
USB charging temperature
range
From 0º to 45ºC (from 32º to 113ºF)
Solar charging temperature
range
From 0º to 60ºC (from 32º to 140ºF)
Wireless frequency/protocol 2.4 GHz @ 0 dBm nominal
Battery Life Information
The actual battery life depends on the features enabled on your
device, such as activity tracking, wrist-based heart rate,
smartphone notifications, GPS, internal sensors, and connected
sensors (Maximizing the Battery Life, page 25).
Battery Life Battery Life With Solar Mode
Up to 24 days Up to 24 days plus 30 days
2
Smartwatch mode with
activity tracking and 24/7
wrist-based heart rate
monitoring
Up to 30 hours Up to 30 hours plus 8
hours
3
GPS mode with wrist-
based heart rate
Up to 70 hours Up to 70 hours plus 75
hours
3
Max. battery GPS mode
Up to 28 days Up to 28 days plus 40 days
2
Expedition GPS mode
Up to 56 days Up to 56 days plus
unlimited
2
Battery saver watch
mode
Data Management
NOTE: The device is not compatible with Windows
®
95, 98, Me,
Windows NT
®
, and Mac
®
OS 10.3 and earlier.
Disconnecting the USB Cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not necessary
to safely disconnect the device.
1
Complete an action:
For Windows computers, select the Safely Remove
Hardware icon in the system tray, and select your device.
For Apple
®
computers, select the device, and select File >
Eject.
1
The device withstands pressure equivalent to a depth of 100 m. For more
information, go to www.garmin.com/waterrating.
2
All-day wear with 3 hr./day outside in 50,000 lux conditions.
3
With use in 50,000 lux conditions.
Device Information 23
2
Disconnect the cable from your computer.
Deleting Files
NOTICE
If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
1
Open the Garmin drive or volume.
2
If necessary, open a folder or volume.
3
Select a file.
4
Press the Delete key on your keyboard.
NOTE: If you are using an Apple computer, you must empty
the Trash folder to completely remove the files.
Device Maintenance
Device Care
NOTICE
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Avoid pressing the keys under water.
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Cleaning the Device
NOTICE
Even small amounts of sweat or moisture can cause corrosion
of the electrical contacts when connected to a charger.
Corrosion can prevent charging and data transfer.
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
TIP: For more information, go to www.garmin.com/fitandcare.
Changing the Bands
You can replace the bands with new Instinct bands or
compatible QuickFit
®
22 bands.
1
Use a paper clip to push in the watch pin.
2
Remove the band from the watch.
3
Select an option:
To install Instinct bands, align one side of the new band
with the holes on the device, push in the exposed watch
pin, and press the band into place.
NOTE: Make sure the band is secure. The watch pin
should align with the holes on the device.
To install QuickFit 22 bands, remove the watch pin from
the Instinct band, replace the watch pin on the device, and
press the new band into place.
NOTE: Make sure the band is secure. The latch should
close over the watch pin.
4
Repeat the steps to change the other band.
Troubleshooting
My device is in the wrong language
You can change the device language selection if you have
accidently selected the wrong language on the device.
1
Hold MENU.
2
Scroll down to the last item in the list, and press GPS.
24 Device Maintenance
3
Scroll down to the second to last item in the list, and press
GPS.
4
Press GPS.
5
Select your language.
6
Press GPS.
Managing Language Files
You can remove language files from your device to increase the
amount of available storage space. If necessary, you can install
the language files again later.
1
Hold MENU.
2
Select Settings > System > Language.
3
Select a language.
4
Select an option:
To remove the language file, select Delete.
To install the language file, select Install, connect the
device to your computer using a USB cable, and sync with
the Garmin Express application.
Is my smartphone compatible with my
device?
The Instinct Solar device is compatible with smartphones using
Bluetooth technology.
Go to www.garmin.com/ble for compatibility information.
My phone will not connect to the device
If your phone will not connect to the device, you can try these
tips.
Turn off your smartphone and your device, and turn them
back on again.
Enable Bluetooth technology on your smartphone.
Update the Garmin Connect app to the latest version.
Remove your device from the Garmin Connect app and the
Bluetooth settings on your smartphone to retry the pairing
process.
If you bought a new smartphone, remove your device from
the Garmin Connect app on the smartphone you intend to
stop using.
Bring your smartphone within 10 m (33 ft.) of the device.
On your smartphone, open the Garmin Connect app, select
or , and select Garmin Devices > Add Device to enter
pairing mode.
From the watch face, hold MENU, and select Settings >
Phone > Pair Phone.
Can I use my Bluetooth sensor with my
watch?
The device is compatible with some Bluetooth sensors. The first
time you connect a sensor to your Garmin device, you must pair
the device and sensor. After they are paired, the device
connects to the sensor automatically when you start an activity
and the sensor is active and within range.
1
Hold MENU.
2
Select Settings > Sensors & Accessories > Add New.
3
Select an option:
Select Search All.
Select your sensor type.
You can customize the optional data fields (Customizing the
Data Screens, page 17).
Restarting Your Device
1
Hold CTRL until the device turns off.
2
Hold CTRL to turn on the device.
Resetting All Default Settings
You can reset all of the device settings to the factory default
values.
1
Hold MENU.
2
Select Settings > System > Reset.
3
Select an option:
To reset all of the device settings to the factory default
values and delete all user-entered information and activity
history, select Delete Data and Reset Settings.
To reset all of the device settings to the factory default
values and save all user-entered information and activity
history, select Reset Default Settings.
Acquiring Satellite Signals
The device may need a clear view of the sky to acquire satellite
signals. The time and date are set automatically based on the
GPS position.
TIP: For more information about GPS, go to www.garmin.com
/aboutGPS.
1
Go outdoors to an open area.
The front of the device should be oriented toward the sky.
2
Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite signals.
Improving GPS Satellite Reception
Frequently sync the device to your Garmin Connect account:
Connect your device to a computer using the USB cable
and the Garmin Express application.
Sync your device to the Garmin Connect app using your
Bluetooth enabled smartphone.
While connected to your Garmin Connect account, the device
downloads several days of satellite data, allowing it to quickly
locate satellite signals.
Take your device outside to an open area away from tall
buildings and trees.
Remain stationary for a few minutes.
The temperature reading is not accurate
Your body temperature affects the temperature reading for the
internal temperature sensor. To get the most accurate
temperature reading, you should remove the watch from your
wrist and wait 20 to 30 minutes.
You can also use an optional tempe external temperature
sensor to view accurate ambient temperature readings while
wearing the watch.
Maximizing the Battery Life
You can do several things to extend the life of the battery.
Change the power mode during an activity (Power Modes,
page 2).
Turn on the battery saver feature from the controls menu
(Viewing the Controls Menu, page 1).
Reduce the backlight timeout (Changing the Backlight
Settings, page 22).
Reduce the backlight brightness.
Use UltraTrac GPS mode for your activity (UltraTrac,
page 19).
Turn off Bluetooth technology when you are not using
connected features (Connected Features, page 12).
When pausing your activity for a longer period of time, use
the resume later option (Stopping an Activity, page 2).
Troubleshooting 25
Turn off activity tracking (Turning Off Activity Tracking,
page 7).
Use a watch face that is not updated every second.
For example, use a watch face without a second hand
(Customizing the Watch Face, page 20).
Limit the smartphone notifications the device displays
(Managing Notifications, page 12).
Stop broadcasting heart rate data to paired Garmin devices
(Broadcasting Heart Rate Data to Garmin Devices, page 14).
Turn off wrist-based heart rate monitoring (Turning Off the
Wrist-based Heart Rate Monitor, page 15).
NOTE: Wrist-based heart rate monitoring is used to calculate
vigorous intensity minutes and calories burned.
Turn on manual pulse oximeter readings.
Activity Tracking
For more information about activity tracking accuracy, go to
garmin.com/ataccuracy.
My daily step count does not appear
The daily step count is reset every night at midnight.
If dashes appear instead of your step count, allow the device
to acquire satellite signals and set the time automatically.
My step count does not seem accurate
If your step count does not seem accurate, you can try these
tips.
Wear the device on your non-dominant wrist.
Carry the device in your pocket when pushing a stroller or
lawn mower.
Carry the device in your pocket when actively using your
hands or arms only.
NOTE: The device may interpret some repetitive motions,
such as washing dishes, folding laundry, or clapping your
hands, as steps.
The step counts on my device and my Garmin
Connect account don't match
The step count on your Garmin Connect account updates when
you sync your device.
1
Select an option:
Sync your step count with the Garmin Connect application
(Using Garmin Connect on Your Computer, page 13).
Sync your step count with the Garmin Connect app
(Manually Syncing Data with Garmin Connect, page 13).
2
Wait while the device syncs your data.
Syncing can take several minutes.
NOTE: Refreshing the Garmin Connect app or the Garmin
Connect application does not sync your data or update your
step count.
The floors climbed amount does not seem accurate
Your device uses an internal barometer to measure elevation
changes as you climb floors. A floor climbed is equal to 3 m
(10 ft.).
Avoid holding handrails or skipping steps while climbing
stairs.
In windy environments, cover the device with your sleeve or
jacket as strong gusts can cause erratic readings.
My intensity minutes are flashing
When you exercise at an intensity level that qualifies toward
your intensity minutes goal, the intensity minutes flash.
Exercise for at least 10 consecutive minutes at a moderate or
vigorous intensity level.
Getting More Information
You can find more information about this product on the Garmin
website.
Go to support.garmin.com for additional manuals, articles,
and software updates.
Go to buy.garmin.com, or contact your Garmin dealer for
information about optional accessories and replacement
parts.
Go to www.garmin.com/ataccuracy for information about
feature accuracy.
This is not a medical device.
Appendix
Data Fields
%HRR: The percentage of heart rate reserve (maximum heart
rate minus resting heart rate).
24-Hour Max.: The maximum temperature recorded in the last
24 hours from a compatible temperature sensor.
24-Hour Min.: The minimum temperature recorded in the last
24 hours from a compatible temperature sensor.
Ambient Press.: The uncalibrated ambient pressure.
Average HR: The average heart rate for the current activity.
Average Pace: The average pace for the current activity.
Average Swolf: The average swolf score for the current activity.
Your swolf score is the sum of the time for one length plus
the number of strokes for that length (Swim Terminology,
page 4). In open water swimming, 25 meters is used to
calculate your swolf score.
Avg. %HRR: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the current
activity.
Avg. Ascent: The average vertical distance of ascent since the
last reset.
Avg. Cadence: Cycling. The average cadence for the current
activity.
Avg. Cadence: Running. The average cadence for the current
activity.
Avg. Descent: The average vertical distance of descent since
the last reset.
Avg. Lap Time: The average lap time for the current activity.
Avg. Moving Speed: The average speed when moving for the
current activity.
Avg. Nautical Speed: The average speed in knots for the
current activity.
Avg. Overall Speed: The average speed for the current activity,
including both moving and stopped speeds.
Avg. Speed: The average speed for the current activity.
Avg. Strk/Len: The average number of strokes per pool length
during the current activity.
Avg. Strk Rate: Swimming. The average number of strokes per
minute (spm) during the current activity.
Avg. Strk Rate: Paddle sports. The average number of strokes
per minute (spm) during the current activity.
Avg Dist Per Stk: Swimming. The average distance traveled
per stroke during the current activity.
Avg Dist Per Stk: Paddle sports. The average distance traveled
per stroke during the current activity.
Avg HR %Max.: The average percentage of maximum heart
rate for the current activity.
Baro. Pressure: The calibrated current pressure.
Battery Level: The remaining battery power.
26 Appendix
Bearing: The direction from your current location to a
destination. You must be navigating for this data to appear.
Cadence: Cycling. The number of revolutions of the crank arm.
Your device must be connected to a cadence accessory for
this data to appear.
Cadence: Running. The steps per minute (right and left).
Calories: The amount of total calories burned.
Compass Hdg.: The direction you are moving based on the
compass.
Course: The direction from your starting location to a
destination. Course can be viewed as a planned or set route.
You must be navigating for this data to appear.
Dest. Wpt: The last point on the route to the destination. You
must be navigating for this data to appear.
Dist. Per Stroke: Paddle sports. The distance traveled per
stroke.
Dist. Remaining: The remaining distance to the final
destination. You must be navigating for this data to appear.
Distance: The distance traveled for the current track or activity.
Distance To Next: The remaining distance to the next waypoint
on the route. You must be navigating for this data to appear.
Elapsed Time: The total time recorded. For example, if you start
the timer and run for 10 minutes, then stop the timer for 5
minutes, then start the timer and run for 20 minutes, your
elapsed time is 35 minutes.
Elevation: The altitude of your current location above or below
sea level.
Estimated Total Distance: The estimated distance from the
start to the final destination. You must be navigating for this
data to appear.
ETA: The estimated time of day when you will reach the final
destination (adjusted to the local time of the destination). You
must be navigating for this data to appear.
ETA at Next: The estimated time of day when you will reach the
next waypoint on the route (adjusted to the local time of the
waypoint). You must be navigating for this data to appear.
ETE: The estimated time remaining until you reach the final
destination. You must be navigating for this data to appear.
Floors Climbed: The total number of floors climbed up for the
day.
Floors Descended: The total number of floors climbed down for
the day.
Floors per Minute: The number of floors climbed up per minute.
Glide Ratio: The ratio of horizontal distance traveled to the
change in vertical distance.
Glide Ratio Dest.: The glide ratio required to descend from your
current position to the destination elevation. You must be
navigating for this data to appear.
GPS: The strength of the GPS satellite signal.
GPS Elevation: The altitude of your current location using GPS.
GPS Heading: The direction you are moving based on GPS.
Grade: The calculation of rise (elevation) over run (distance).
For example, if for every 3 m (10 ft.) you climb you travel
60 m (200 ft.), the grade is 5%.
Heading: The direction you are moving.
Heart Rate: Your heart rate in beats per minute (bpm). Your
device must be connected to a compatible heart rate monitor.
HR %Max.: The percentage of maximum heart rate.
HR Zone: The current range of your heart rate (1 to 5). The
default zones are based on your user profile and maximum
heart rate (220 minus your age).
Int. Avg. %HRR: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the current
swim interval.
Int. Avg. %Max.: The average percentage of maximum heart
rate for the current swim interval.
Int. Avg. HR: The average heart rate for the current swim
interval.
Int. Distance: The distance traveled for the current interval.
Int. Max. %HRR: The maximum percentage of heart rate
reserve (maximum heart rate minus resting heart rate) for the
current swim interval.
Int. Max. %Max.: The maximum percentage of maximum heart
rate for the current swim interval.
Int. Max. HR: The maximum heart rate for the current swim
interval.
Int. Pace: The average pace for the current interval.
Int. Swolf: The average swolf score for the current interval.
Interval Lengths: The number of pool lengths completed during
the current interval.
Interval Time: The stopwatch time for the current interval.
Int Strk/Len: The average number of strokes per pool length
during the current interval.
Int Strk Rate: The average number of strokes per minute (spm)
during the current interval.
Int Strk Type: The current stroke type for the interval.
L. Lap HR %Max.: The average percentage of maximum heart
rate for the last completed lap.
L. Lap Stk. Rate: Swimming. The average number of strokes
per minute (spm) during the last completed lap.
L. Lap Stk. Rate: Paddle sports. The average number of
strokes per minute (spm) during the last completed lap.
L. Lap Strokes: Swimming. The total number of strokes for the
last completed lap.
L. Lap Strokes: Paddle sports. The total number of strokes for
the last completed lap.
L. Lap Swolf: The swolf score for the last completed lap.
L. Len. Stk. Rate: The average number strokes per minute
(spm) during the last completed pool length.
L. Len. Stk. Type: The stroke type used during the last
completed pool length.
L. Len. Strokes: The total number of strokes for the last
completed pool length.
Lap %HRR: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the current
lap.
Lap Ascent: The vertical distance of ascent for the current lap.
Lap Cadence: Cycling. The average cadence for the current
lap.
Lap Cadence: Running. The average cadence for the current
lap.
Lap Descent: The vertical distance of descent for the current
lap.
Lap Distance: The distance traveled for the current lap.
Lap Dist Per Stk: Swimming. The average distance traveled per
stroke during the current lap.
Lap Dist Per Stk: Paddle sports. The average distance traveled
per stroke during the current lap.
Lap HR: The average heart rate for the current lap.
Lap HR %Max.: The average percentage of maximum heart
rate for the current lap.
Lap Pace: The average pace for the current lap.
Laps: The number of laps completed for the current activity.
Appendix 27
Lap Speed: The average speed for the current lap.
Lap Strk Rate: Swimming. The average number of strokes per
minute (spm) during the current lap.
Lap Strk Rate: Paddle sports. The average number of strokes
per minute (spm) during the current lap.
Lap Strokes: Swimming. The total number of strokes for the
current lap.
Lap Strokes: Paddle sports. The total number of strokes for the
current lap.
Lap Swolf: The swolf score for the current lap.
Lap Time: The stopwatch time for the current lap.
Last Lap %HRR: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the last
completed lap.
Last Lap Ascent: The vertical distance of ascent for the last
completed lap.
Last Lap Cad.: Cycling. The average cadence for the last
completed lap.
Last Lap Cad.: Running. The average cadence for the last
completed lap.
Last Lap Descent: The vertical distance of descent for the last
completed lap.
Last Lap Dist.: The distance traveled for the last completed lap.
Last Lap HR: The average heart rate for the last completed lap.
Last Lap Pace: The average pace for the last completed lap.
Last Lap Speed: The average speed for the last completed lap.
Last Lap Time: The stopwatch time for the last completed lap.
Last Len. Pace: The average pace for your last completed pool
length.
Last Len. Swolf: The swolf score for the last completed pool
length.
Lengths: The number of pool lengths completed during the
current activity.
L Lap Dist P Stk: Swimming. The average distance traveled per
stroke during the last completed lap.
L Lap Dist P Stk: Paddle sports. The average distance traveled
per stroke during the last completed lap.
Max. Ascent: The maximum rate of ascent in feet per minute or
meters per minute since the last reset.
Max. Descent: The maximum rate of descent in meters per
minute or feet per minute since the last reset.
Max. Elevation: The highest elevation reached since the last
reset.
Max. Nautical Speed: The maximum speed in knots for the
current activity.
Maximum Speed: The top speed for the current activity.
Min. Elevation: The lowest elevation reached since the last
reset.
Moving Time: The total time moving for the current activity.
Nautical Dist: The distance traveled in nautical meters or
nautical feet.
Nautical Speed: The current speed in knots.
Next Waypoint: The next point on the route. You must be
navigating for this data to appear.
Off Course: The distance to the left or right by which you have
strayed from the original path of travel. You must be
navigating for this data to appear.
Pace: The current pace.
Repeat On: The timer for the last interval plus the current rest
(pool swimming).
Reps: During a strength training activity, the number of
repetitions in a workout set.
Rest Timer: The timer for the current rest (pool swimming).
Set Timer: During a strength training activity, the amount of time
spent in the current workout set.
Speed: The current rate of travel.
Stopped Time: The total time stopped for the current activity.
Stroke Rate: Swimming. The number of strokes per minute
(spm).
Stroke Rate: Paddle sports. The number of strokes per minute
(spm).
Strokes: Swimming. The total number of strokes for the current
activity.
Strokes: Paddle sports. The total number of strokes for the
current activity.
Sunrise: The time of sunrise based on your GPS position.
Sunset: The time of sunset based on your GPS position.
Swim Time: The swimming time for the current activity, not
including rest time.
Temperature: The temperature of the air. Your body
temperature affects the temperature sensor. You can pair a
tempe sensor with your device to provide a consistent source
of accurate temperature data.
Time in Zone: The time elapsed in each heart rate zone.
Time of Day: The time of day based on your current location
and time settings (format, time zone, daylight saving time).
Timer: The current time of the countdown timer.
Time to Next: The estimated time remaining before you reach
the next waypoint in the route. You must be navigating for
this data to appear.
Total Ascent: The total elevation distance ascended since the
last reset.
Total Descent: The total elevation distance descended since
the last reset.
V Dist to Dest: The elevation distance between your current
position and the final destination. You must be navigating for
this data to appear.
Vert. Spd.: The rate of ascent or descent over time.
Vert Spd to Tgt: The rate of ascent or descent to a
predetermined altitude. You must be navigating for this data
to appear.
VMG: The speed at which you are closing on a destination along
a route. You must be navigating for this data to appear.
Wheel Size and Circumference
Your speed sensor automatically detects your wheel size. If
necessary, you can manually enter your wheel circumference in
the speed sensor settings.
The tire size is marked on both sides of the tire. This is not a
comprehensive list. You can also measure the circumference of
your wheel or use one of the calculators available on the
internet.
Tire Size Wheel Circumference (mm)
20 × 1.75 1515
20 × 1-3/8 1615
22 × 1-3/8 1770
22 × 1-1/2 1785
24 × 1 1753
24 × 3/4 Tubular 1785
24 × 1-1/8 1795
24 × 1.75 1890
24 × 1-1/4 1905
28 Appendix
Tire Size Wheel Circumference (mm)
24 × 2.00 1925
24 × 2.125 1965
26 × 7/8 1920
26 × 1-1.0 1913
26 × 1 1952
26 × 1.25 1953
26 × 1-1/8 1970
26 × 1.40 2005
26 × 1.50 2010
26 × 1.75 2023
26 × 1.95 2050
26 × 2.00 2055
26 × 1-3/8 2068
26 × 2.10 2068
26 × 2.125 2070
26 × 2.35 2083
26 × 1-1/2 2100
26 × 3.00 2170
27 × 1 2145
27 × 1-1/8 2155
27 × 1-1/4 2161
27 × 1-3/8 2169
29 x 2.1 2288
29 x 2.2 2298
29 x 2.3 2326
650 x 20C 1938
650 x 23C 1944
650 × 35A 2090
650 × 38B 2105
650 × 38A 2125
700 × 18C 2070
700 × 19C 2080
700 × 20C 2086
700 × 23C 2096
700 × 25C 2105
700C Tubular 2130
700 × 28C 2136
700 × 30C 2146
700 × 32C 2155
700 × 35C 2168
700 × 38C 2180
700 × 40C 2200
700 × 44C 2235
700 × 45C 2242
700 × 47C 2268
Symbol Definitions
These symbols may appear on the device or accessory labels.
WEEE disposal and recycling symbol. The WEEE symbol is
attached to the product in compliance with the EU directive
2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
It is intended to deter the improper disposal of this product and to
promote reuse and recycling.
Appendix 29
Index
A
accessories 22, 25, 26
activities 2–4, 17, 19
custom 3, 10, 19
favorites 3
saving 2
starting 2
activity tracking 6, 7
alarms 9, 18
alerts 7, 9, 18, 21
heart rate 14
altimeter 10, 11, 20
calibrating 20
ANT+ sensors 22
applications 13
smartphone 1
area calculation 11
auto climb 19
Auto Lap 18
Auto Pause 18
auto rest 5
auto scroll 19
B
backlight 1, 22
bands 24
barometer 10, 11, 20
calibrating 20
battery 24
charging 1, 2
life 23
maximizing 2, 4, 12, 19, 21, 25
bike sensors 23
Bluetooth sensors 22
Bluetooth technology 12, 13, 25
Body Battery 15
buttons 1
C
cadence 4
alerts 18
sensors 23
calendar 7
calibrating
altimeter 20
compass 20
calorie, alerts 18
charging 1, 2
cleaning the device 24
clock 9
compass 10, 11, 20, 21
calibrating 20
settings 21
connecting 13
controls menu 1, 20
coordinates 10
countdown timer 9
courses
creating 10
editing 10
loading 10
customizing the device 17, 20–22
D
data
pages 17
storing 13
transferring 13
uploading 13
deleting
all user data 24
history 12
personal records 8
distance 19
alerts 18, 21
drills 5
F
favorites 19
foot pod 23
G
Galileo 19
Garmin Connect 1, 7, 10, 12, 13
storing data 13
Garmin Express 2
updating software 2
GLONASS 19, 22
goals 8
GPS 19, 22
settings 19
signal 25
H
heart rate 5, 13, 14
alerts 14, 18
monitor 14, 15
pairing sensors 14
zones 5, 6, 12
history 11, 12
deleting 12
sending to computer 13
hunter 4
I
indoor training 3
inReach remote 16
intensity minutes 7, 26
intervals 4, 5
workouts 7, 8
K
keys 22
customizing 19
L
language 22
lengths 4
locations 10
deleting 10
editing 10
saving 9
M
main menu, customizing 16
man overboard (MOB) 10
map 21
maps 18, 21
browsing 11
navigating 11
marine 4
menu 1
metronome 4
MOB 10
Move IQ 7
N
navigation 4, 18, 21
Sight 'N Go 10
stopping 11
north reference 20
notifications 12
O
odometer 12
oxygen saturation 15
P
pairing
ANT+ sensors 14
Bluetooth sensors 25
sensors 22
smartphone 1, 25
personal records 8
deleting 8
profiles 2
user 5
pulse oximeter 7, 14, 15
R
racing 8
resetting the device 21, 25
routes 10
S
satellite signals 19, 25
saving activities 3
screen 22
settings 1, 7, 15–17, 19–22, 25
shortcuts 1, 20
Sight 'N Go 10
skiing
alpine 3
snowboarding 3
sleep mode 6
smartphone 13, 16, 25
applications 12
pairing 1, 25
snowboarding 3
software
license 22
updating 2, 13
version 22
specifications 23
speed 19
speed and cadence sensors 23
stopwatch 9
storing data 13
stress level 14, 15
stress score 15
strokes 4, 5
sunrise and sunset times 9
swimming 5
swolf score 4
system settings 22
T
target 8
tempe 23, 25
temperature 23, 25
time
alerts 18
settings 22
zones and formats 22
time zones 9
timer 3, 11
countdown 9
tones 4, 9
TracBack 2, 11
tracking 15
tracks 10
training 7, 8, 12
plans 7
treadmill 3
troubleshooting 14, 15, 24–26
U
UltraTrac 19
unit ID 22
units of measure 22
updates, software 13
uploading data 13
USB 13
disconnecting 23
user data, deleting 24
user profile 5
V
VIRB remote 16, 17
Virtual Partner 8
W
watch faces 20
watch mode 19
water resistance 24
waypoints, projecting 10
wheel sizes 28
widgets 1, 2, 14–16
workouts 7
loading 7
30 Index
Z
zones
heart rate 5, 6
time 9
Index 31
support.garmin.com
GUID-A298EB1C-21D9-430F-8D06-A2CC74E5D5E9 v2October 2020
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Instinct Solar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Instinct Solar in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Instinct Solar

Garmin Instinct Solar User Manual - German - 42 pages

Garmin Instinct Solar User Manual - Dutch - 40 pages

Garmin Instinct Solar User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info