657457
9
Zoom out
Zoom in
Previous page
1/38
Next page
7DeLorme inReach User Manual | Using the inReach
Message LED
Sending a messageThe Message LED ashes green once every three seconds when you send a message
(including SOS messages); it stops ashing when the message has been sent. You should also watch the Signal
LED to ensure you have a good signal; see page 8 for more information.
New messageThe Message LED ashes green twice every 1.5 seconds when a message has been sent to
you. You can view incoming messages on a connected device.
To dismiss the new message indicator, press and release the Message button. You can also dismiss the message
by viewing it on a connected device.
SOS
IMPORTANT! Use SOS only in an emergency. Do not test SOSall SOS activations are real and a false activation
could result in charges to you.
The inReach cannot be powered off while an SOS message is being sent or cancelled.
Use the SOS button to send an emergency message to search and rescue when you are using the inReach in
standalone mode. You can also use the SOS button on the inReach when it is paired with a compatible device. Your
location will be relayed to search and rescue and they will dispatch emergency services and notify the emergency
contacts listed on your account at explore.delorme.com account. Your location will automatically update until you
cancel the SOS.
Your location will be sent to search and rescue as follows:
First ten minutes, every sixty seconds
Ten minutes to one hour, every ten minutes
One hour to eight hours, every 15 minutes
Eight hours to 24 hours, every 60 minutes
After the rst ten minutes, if you are stationary, your location is sent every thirty minutes; the transmission rate is
slowed to preserve battery life.
If your position changes by more than 100 meters, your location will be sent again. If you don’t need to move for safety
reasons, stay where you are to preserve battery life and to make it easier for search and rescue to locate you.
Note If you do not have a clear view of the sky, the SOS messages will be stored and then sent as soon as you have
a good signal. The Signal LED will ash green when you have a good signal; it will ash red when you do not have a
good signal; see page 8 for more information.
To send an SOS message
1. Press and slide the SOS button lock to the left.
2. Press and hold the SOS button until the SOS LED begins to ash and then release the button. The SOS LED
ashes green once every three seconds. In addition, the Message LED ashes green once every three seconds
while the message is being sent.
When the SOS and Message LEDs begin ashing green more rapidly (every 1.5 seconds), it indicates that your
SOS message was received by an emergency responder and they are acknowledging your message.
To conrm that you know search and rescue has received your message, press and immediately release the SOS
button. The SOS LED resumes ashing green every three seconds.
If you are unable to conrm that you know your message was received, help will still be sent.
To cancel an SOS message
1. Press and hold the SOS button until the SOS LED ashes rapidly and then release the button.
This sends a message to search and rescue to let them know that the emergency has been resolved and
assistance is no longer needed.
2. Press and slide the SOS button lock to the right.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin inReach for Smartphones at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin inReach for Smartphones in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info