657457
8
Zoom out
Zoom in
Previous page
1/38
Next page
6 Using the inReach | DeLorme inReach User Manual
Using the inReach
You can use the inReach as a standalone device when you don’t want to use it with a compatible device. You can also
interact with the inReach directly when it is connected to a compatible device.
Power
To turn the inReach on, press and hold the Power button until the Power LED ashes green and then release the
button. When the inReach is powered on, the Power LED will ash green once every three seconds.
To turn the inReach off, press and hold the Power button until the Power LED ashes rapidly and then release the
button.
When power is low, the Power LED ashes red once every three seconds. See Batteries on page 4 for more
information.
When there is not enough power to send any messages or tracking points, the Power LED ashes red every 1.5
seconds. See Batteries on page 4 for more information.
Tracking
The Tracking button allows you to send your location to explore.delorme.com when you are using the inReach in
standalone mode. When you are moving, your location is sent every 10 minutes. When you are stationary, your location
is sent every four hours; if you move more than 100 meters, tracking at 10 minute intervals resumes.
To start tracking, press and hold the Tracking button until the Tracking LED ashes and then release the button.
The LED will ash green once every three seconds while tracking until you cancel tracking or turn off the inReach.
To stop tracking, press and hold the Tracking button until the Tracking LED ashes rapidly and then release the
button.
You can also use tracking when connected with an Earthmate PN-60w (see page 12) or mobile device (see page
21 for Android and page 25 for iOS). In addition, tracking can be initiated from explore.delorme.com by anyone
who can log in to your account. See the Help at explore.delorme.com for more information.
Message
Use the Message button to send predened inReach messages that you created on explore.delorme.com. You can
create up to three messagesit’s a good idea to make a note of the messages in the proper order and take it with you.
The message is sent to contacts you designated on explore.delorme.com when you created the message.
To send predened message one, press and hold the Message button until the Message LED ashes once and
then release the button. The Message LED will ash once every three seconds until the message is sent.
To send predened message two, press and hold the Message button until the Message LED ashes twice and
then release the button. The Message LED will ash twice every three seconds until the message is sent.
To send predened message three, press and hold the Message button until the Message LED ashes three
times and then release the button. The Message LED will ash three times every three seconds until the message
is sent.
Notes
The LED ashes for choosing the message will cycle in order until you release the Message button to make a
selection.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin inReach for Smartphones at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin inReach for Smartphones in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info