579857
185
Zoom out
Zoom in
Previous page
1/412
Next page
190-01007-A3 GTN 6XX/7XX AML STC Installation Manual
Rev. 4 Page 5-47
5.5.4.7.1 Transponder Inputs and Outputs
Access the transponder inputs and outputs page, shown in Figure 5-33 by touching the Inputs and Outputs
key from the Remote XPDR configuration page. The transponder RS-232 channel inputs can be
configured by the GTN. RS-232 channel 1 input for the transponder can only be set to Remote, and is the
default for channel 1 input. RS-232 channel 1 is used for control and remote configuring of the
transponder.
5.5.4.7.1.1 RS-232 Configuration
The following outlines RS-232 channel settings and describes what each setting is used for. Select the
correct input/output setting based upon the installed interfaced equipment. It is not necessary to select the
baud rate for the transponder port to which the GTN is connected.
Figure 5-32. Remote XPDR
Configuration Page
Figure 5-33. Remote XPDR
Inputs/Outputs Page
Table 5-36. RS-232 Channel 1 Inputs
Selection Description
Remote The RS-232 port is configured for remote control by the GTN.
Table 5-37. RS-232 Channel 1 Outputs
Selection Description
Remote RS-232 serial output remote data.
Remote + TIS RS-232 serial output remote data with TIS.
185


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GTN 650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GTN 650 in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info