579857
184
Zoom out
Zoom in
Previous page
1/412
Next page
GTN 6XX/7XX AML STC Installation Manual 190-01007-A3
Page 5-46 Rev. 4
5.5.4.6 GAD 42 Configuration
The GAD 42 can be configured by the GTN if an ARINC 429
input is connected to the GAD 42. To configure the GAD 42,
select the External Systems page group and then touch the
GAD 42 key.
The GAD 42 configuration page allows remote configuration
of the GAD 42 Interface Adapter Unit. For details on how to
configure the unit, see Chapter 5 of the GAD 42 Installation
Manual, P/N 190-00159-00.
5.5.4.7 Remote Transponder Configuration (GTX 32 or GTX 33)
A remote transponder can be configured by the GTN via RS-232 if a transponder is configured for one of
the RS-232 ports. To configure the transponder, it must first be selected as present and the type of
transponder installed must be specified. To do this, see Section 5.5.1.4.4. Next, go to the External
Systems page and touch the XPDR key. This displays the page shown in Figure 5-32, which allows the
remote transponder to be configured.
NOTE
If the GTN controls any transponder (GTX 32/33/327/328/330), then that transponder
will boot into the same mode (Normal or Configuration) as the GTN.
NOTE
If the GTN is not communicating with the GTX transponder, all of the editable fields for
the setup items shown in the following sections will be dashed out. If the fields are
dashed out, check the wiring and pin connections from the GTN to the transponder.
NOTE
The GTN can interface to the GTX 327/328/330/330 ES; however, configuration of the
panel-mounted GTX 327/328/330/330 ES is not supported. These transponders should be
configured per their installation manuals rather than through the GTN.
Figure 5-31. GAD 42
Configuration Page
184


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GTN 650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GTN 650 in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info