583642
69
Zoom out
Zoom in
Previous page
1/130
Next page
GPSMAP 3206/3210 Owner’s Manual 61
MaIn Menu > sYsteM tab
MaIn
Menu
Automatic Backlight—automatically adjusts the display brightness to a
specied level at sunrise and sunset. You can specify offset minutes for
before sunrise and after sunset.
Beeper—controls the audible beep. Select Off, Alarms Only (sounds for
alarms/messages), or Key and Alarm (sounds for key presses and alarms/
messages).
Language
—sets the language for the unit’s on-screen text.
Services—after a new device is detected on the network, clearing the
Auto-Detect Services check box speeds up the startup sequence. If the
Auto-Detect Services check box is not selected and new hardware is
added, you must select the corresponding service check box to enable the
new hardware device.
The following soft keys are available:
Factory Dts—restores all settings to Garmin’s original setup values for
all devices on the network.
System Info—shows the unit’s software, basemap version, and electronic
serial number.
Update Notes—shows software notes for the current software version.
To adjust the automatic backlight settings:
1. HighlighttheAutomatic Backlighteld,andpressENTER.
2. UsingtheROCKER,highlightOn,andpressENTER.
3. HighlighttheSetupbutton,andpressENTERtoopentheAdjustBacklight
window.
4. ToadjustthebacklightlevelsFor DayandFor Night,highlightthe
correspondingslider,andpressENTER.
Sliders
5. PressupordownontheROCKERtoincreaseordecreasethebacklight
level,andpressENTER.
6. Toadjusttheoffsetminutes,selecttheminuteseld,andpressENTER.
7. EntertheoffsetminutesforBefore SunriseorAfter Sunset.Ifzero,the
unitautomaticallychangestothespeciedlevelatsunrise/sunset.Press
QUITtoexit.
Units Sub Tab
Use the Units sub tab to dene settings for Position Format, Depth, Map Datum,
Temperature, Distance, Speed, and Elevation, Pressure, and Heading.
WARNING: The Units sub tab settings affect how navigation information
appears on the GPSMAP 3206/3210. If you are using a map or chart with
your GPS, make sure the settings on the Units sub tab match that of the map
or chart. This information should be shown somewhere on the map or chart. If
not, contact the map or chart maker to determine what position format, datum,
heading, and units of measure are used for the map or chart.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 3206 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 3206 in the language / languages: English as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info