583642
67
Zoom out
Zoom in
Previous page
1/130
Next page
GPSMAP 3206/3210 Owner’s Manual 59
MaIn Menu > alarMs tab
MaIn
Menu
System Alarms
Use the System sub tab to set alarms for the system clock, batteries, and GPS
accuracy.
Clock—provides an alarm for the system clock. Enter a time in the time
eld and turn the alarm on and off from the control eld menu. Remember
to enter alarm times in the same time format (UTC or local) you are using
for your system. The unit must be on for the clock alarm to work.
Battery
—sets an alarm to sound when the battery reaches a user-
determined low voltage.
GPS Accuracy—sets an alarm to sound when the GPS location accuracy
falls outside the user-determined value.
Nav (Navigation) Alarms
Use the Nav sub tab to set navigational alarms, including anchor drag, arrival, and
off course.
Anchor Drag—sets an alarm to sound when you are a specied drift
distance. Enter a value in the distance eld, and use the control eld to turn
the alarm on and off.
Arrival—sets an alarm to sound when a specied distance or time away
from a destination waypoint is exceeded. Enter a distance, radius, or time
for sounding the alarm, and use the control eld to set the alarm to Off,
Dist (Distance), or Time.
Off Course—sets an alarm to sound when you are off course by a specic
distance. Enter a distance in the distance eld, and use the control eld to
turn the alarm on and off.
Sonar Alarms
Use the Sonar sub tab to set sonar alarms, including shallow or deep water,
water temperature, and sh.*
Shallow Water/Deep Water—sets an alarm to sound when you enter
an area of specied depth that is too shallow or too deep. You must be
receiving sonar data for this function to work.
Water Temperature—sets an alarm to sound when the transducer reports
a temperature either above, below, inside, or outside the specied values.
Fish —sets an alarm to sound when the unit detects a sh of the specied
symbols.
*You must be receiving NMEA sonar data or using a GSD 20, GSD 21, or GSD 22 for the
sonar alarms to function.
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 3206 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 3206 in the language / languages: English as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info