Manual Garmin GPSMAP 2110 (page 21 of 106) (English)

583758

21

Zoom out

Zoom in

Previous page

1/106

Next page

GPSMAP 2106/2110 Owner’s Manual 13

BASIC OPERATION > CREATING AND USING WAYPOINTS

Creating and Using Waypoints

The GPSMAP 2106/2110 stores up to 4,000 alphanumeric waypoints, each with a

user-deﬁned icon, comment, depth, and water temperature.

NOTE: If you are using a Garmin GSD 21 or GSD 22 sounder module, the

Depth and Water Temp ﬁelds ﬁll in automatically.

You can create waypoints using three basic methods:

• ENTER/MARK—use the ENTER/MARK key to quickly mark your

current location.

• Graphically—use the map display to deﬁne a new waypoint location.

• Manually—enter new waypoint coordinates manually.

Creating Waypoints Using the ENTER/MARK Key

Use the ENTER/MARK key to capture your current location (or pointer or map

item location) to create a new waypoint. You must have a valid position ﬁx to

mark your current location.

To

mark your current location:

1. Press and hold ENTER/MARK until the Review Waypoint Page appears.

The GPSMAP 2106/2110 captures its current location and creates a

default name and symbol for the new waypoint.

2. To accept the waypoint with the default name and symbol, press ENTER.

To change any of the available waypoint information, see page 16.

Review Waypoint Page (BlueChart Data Shown)

Creating Waypoints Using the Map

You can create a waypoint by using the map pointer to point to any map

location or map feature. When you move the pointer over a map item, you see a

highlighted description of the item.

To create a new waypoint using a map location:

1. Use the ROCKER to move the pointer to the map location you want.

2. Press and quickly release ENTER/MARK to capture the pointer location.

Do not hold the button down; doing so marks your current location, not the

map location. The Review Waypoint Page appears.

3. To accept the waypoint with the default information, press ENTER.

OR

To change any waypoint information, highlight the appropriate ﬁeld and

press ENTER. After entering your changes, press the OK soft key.

1

I have acquired a Garmin 2110 with a GPS17.
The cable between the two has been carefully cut - I assume to remove it from the previous vessel. I have connected all the cables together as per the Basic Installation shown in the handbook. All works fine.
My question is how can i reconnect the two (front and rear) looms together. The wires from the GPS17 are too fine to solder and not of sufficient size as to allow connection by electrical Mobloc.
Can anyone help me by telling me what they have used to connect these looms together?
Thanks in anticipation
Ian Hutchinson Submitted on 15-4-2021 at 11:46
Reply Report abuse
I have just acquired a Garmin 2110 and GPS17.
The wires that connect the two together have been carefully cut - I assume to enable the units to be removed from the previous vessel. I have connected all the wiring together as per the Basic Wiring diagram and all worked perfectly.
However the wires from the GPS17 are extreamly delicate and will not (maybe my inexperience ) allow solder connections in order to make the installation complete. My question is what can I use to make a permanent fixing of the two (front and rear) looms?
I have tried using a small mobloc but the wires in the GPS17 loom are too fine to make a good connection.
Any help would be greatly appreciated
Ian Hutchinson Submitted on 15-4-2021 at 11:25
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Garmin GPSMAP 2110 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 2110 in the language / languages: English as an attachment in your email.

The manual is 6,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info