522234
77
Zoom out
Zoom in
Previous page
1/104
Next page
67
Reference
Main Menu:
Comm and Alarm Tabs
Alarm Tab— allow you to defi ne the alarm settings. The Alarm tab is divided into three submenu
tabs: System alarms, Nav alarms and Sonar alarms.
System Tab:
Clock— provides an alarm for the system clock. Enter a time in the time fi eld and turn the alarm on
and off from the control fi eld menu. Remember to enter alarm times in the same time format (UTC
or local) you’re using for your system. The unit must be on for the clock alarm to work.
Battery— sets an alarm to sound when the battery is reaching a critical state of discharge.
DGPS and Accuracy— DGPS alarm will sound when the unit loses a differential fi x. The accuracy
alarm will sound when the GPS position accuracy falls outside the user-set value.
Nav Tab:
Anchor Drag— sets an alarm to sound when you’ve exceeded a specifi ed drift distance. Enter a value
in the distance fi eld and use the control fi eld to turn the alarm on and off.
Arrival— sets an alarm to sound when you’re a specifi ed distance or time away from a destination
waypoint. Enter a distance radius or time for sounding the alarm and use the control fi eld to set the
alarm to ‘Off’, ‘Dist’ (Distance), or ‘Time’.
Off Course— sets an alarm to sound when you’re off a desired course by a specifi ed distance. Enter
a distance in the distance fi eld and use the control fi eld to turn the off course alarm on and off.
Sonar Tab: (You must be receiving sonar NMEA data (pg. 87) for these functions to work.
Shallow Water/Deep Water— set alarms to sound when you enter an area of specifi ed depth that is
too shallow and/or too deep. Enter a depth in the distance fi elds and use the control fi elds to turn
the alarms on and off.
Water Temperature — sets an alarm to sound when the transducer reports a temperature either
above, below, inside or outside the specifi ed values.
Fish — sets alarm to sound when unit detects a fi sh of the specifi ed symbol size.
To set an alarm:
1. Use the ARROW KEYPAD to highlight desired submenu tab of the Alarm Tab.
2. Highlight the fi eld below the alarm name you wish activate and press ENTER/MARK.
3. Change the mode to the desired setting and press ENTER/MARK.
4. Highlight the next fi eld to the right and press ENTER/MARK, then enter the desired settings and
press ENTER/MARK to fi nish.
5. If you want the alarm to display and beep until acknowledged, highlight the ‘Persist’ box and press
ENTER/MARK to place a check mark in the box.
Alarm Tab
An alarm will stay active
until acknowledged if
‘Persist’ is checked. Press
ENTER/MARK to
acknowledge an alarm.
182C Manual Part 2.indd 67 6/4/2003, 2:54:21 PM
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 182 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 182 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info