522234
76
Zoom out
Zoom in
Previous page
1/104
Next page
66
Reference
Main Menu:
Comm tab
To restore the Serial Data Format settings back to the default ‘GARMIN Data Transfer’:
1. From the Comm tab, press MENU, highlight ‘Defaults’ and press ENTER/MARK.
If ‘GARMIN DGPS’ or ‘RTCM In/NMEA Out’ format is selected, additional fi elds are provided to
control a Garmin differential beacon receiver directly from your GPSMAP 182/182C/232. You may have
the unit automatically scan for the DGPS beacon signal or you can enter the beacon frequency and bit
rate on the unit and the information will be used to tune the beacon receiver.
To have the unit automatically scan for a frequency:
1. With the unit set to ‘GARMIN DGPS’ or ‘RTCM In/NMEA Out’, use the ARROW KEYPAD to highlight
the “Beacon” eld and press ENTER/MARK.
2. Highlight ‘Scan’ and press ENTER/MARK. The numbers in the “Frequency” eld will change as the
unit scans from 284 kHz to 325 kHz, 200 bit rate, then 100, at 6-second intervals.
To restart the scan:
1. Press MENU, highlight ‘Restart Scan’ and press ENTER/MARK.
To manually enter a frequency and bit rate:
1. With the unit set to ‘GARMIN DGPS’ or ‘RTCM In/NMEA Out’, use the ARROW KEYPAD to highlight
the “Beacon” eld and press ENTER/MARK.
2. Highlight ‘User’ and press ENTER/MARK.
3. Highlight the “Frequency” or “Bit Rate” eld, press ENTER/MARK, then enter a frequency or bit rate
and press ENTER/MARK when done.
The “Status” fi eld will show one of the following:
Tuning— unit is attempting to tune to the specifi ed frequency and bit rate.
Scanning— unit is automatically scanning through the frequencies and bit rates.
Receiving— unit is receiving DGPS signal and ready for operation.
Check Wiring— unit is not making connection with DGPS receiver.
When the unit is receiving a DGPS signal, the “SNR” (Signal to Noise Ratio) and “Distance” fi elds will
show data. The SNR range is 0dB to 30dB, with 30 being the best. The Distance may or may not show
data, depending upon the signal being broadcast from the DGPS site.
Status Field
SNR and Distance will
show data when signal
is received.
The DGPS beacon transmitters are operated by the
U.S. Coast Guard (or similar government agency in
other countries), which is responsible for their accuracy
and maintenance. For DGPS transmitter problems or
to find the most updated list of frequencies and cover-
age areas, contact your local USCG, or see their web
site at http://www.navcen.uscg.mil/.
)
182C Manual Part 2.indd 66 6/4/2003, 2:54:20 PM
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 182 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 182 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info