584000
102
Zoom out
Zoom in
Previous page
1/124
Next page
Page A-2 400 SERIES INSTALLATION MANUAL
Page Rev L P/N 190-00140-02
6. Troubleshooting Information
Refer to the 400 Series Maintenance Manual.
7. Removal and Replacement Information
Refer to section 3.8 of this manual. If the unit is removed and reinstalled, a functional check of the
equipment should be conducted in accordance with section 5.3 of this manual.
8. Diagrams
Refer to sections 3 and 4 of this manual.
9. Special Inspection Requirements
N/A
10. Application of Protective Treatments
N/A
11. Data: Relative to Structural Fasteners
Antenna installation, removal and replacement should be in accordance with applicable provisions of
AC43.13-1A and 43.13-2A. Also, refer to section 3.7 of this manual.
12. Special Tools
N/A
13. This Section is for Commuter Category Aircraft Only
A. Electrical loads: Refer to section 1.3.2 of this manual.
B. Methods of balancing flight controls: N/A.
C. Identification of primary and secondary structures: N/A.
D. Special repair methods applicable to the airplane: Antenna installation, removal, and replacement
should be in accordance with applicable provisions of AC43.13-1B and 43.13-2A.
14. Overhaul Period
No additional overhaul time limitations.
15. Airworthiness Limitation Section
Refer to the [400 Series unit] Sample Flight Manual Supplement.
16. Revision
To revise this ICA, a letter must be submitted to the local FSDO with a copy of the revised FAA Form
337, and revised ICA. The FAA inspector accepts the change by signing Block 3 and including the
following statement:
“The attached revised/new Instructions for Continued Airworthiness (date ______) for the above
aircraft or component major alteration have been accepted by the FAA, superseding the Instructions
for Continued Airworthiness (date ______).”
17. Assistance
Flight Standards Inspectors have the resources to respond to questions regarding the ICA.
18. Implementation and Record Keeping
For major alterations performed in accordance with FAA field approval policy, the owner/operator
operating under Part 91 is responsible for ensuring that the ICA is made part of the applicable section
91.409 inspection program for their aircraft. This is accomplished when a maintenance entry is made
in the aircraft’s maintenance record in accordance with section 43.9. This entry records the major
alteration and identifies the original ICA location (e.g., Block 8 of FAA Form 337, dated ______)
along with a statement that the ICA is now part of the aircraft’s inspection/maintenance requirements.
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 420 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info