584000
101
Zoom out
Zoom in
Previous page
1/124
Next page
400 SERIES INSTALLATION MANUAL Page A-1
P/N 190-00140-02 Page Rev L
Appendix A. CERTIFICATION DOCUMENTS
A.1 Continued Airworthiness
This section provides assistance to the installing agency in preparing Instructions for Continued
Airworthiness (ICA) in response to Bulletin Number HBAW 98-18, “Checklist for Instructions for
Continued Airworthiness for Major Alterations Approved Under the Field Approval Process”, effective
10/7/98.
Aviation Authority approved installers are hereby granted permission to reference appropriate service
instructions and excerpts from this Installation Manual to accomplish the Instructions for Continued
Airworthiness. This permission does not construe suitability of the documents. It is the applicant’s
responsibility to determine the suitability of the documents for the ICA.
Following is a suggested ICA for a GARMIN 400 Series unit installation. Some of the checklist items do
not apply, in which case they should be marked “N/A” (Not Applicable). In this sample, square braces are
used to indicate instances where explicit words should be substituted (e.g., replace “[400 Series unit]” with
“GNS 430”).
Instructions for Continued Airworthiness, GARMIN [400 Series unit]
1. Introduction
[Aircraft that has been altered: Registration (N-) number, Make, Model and Serial Number]
Content, Scope,
Purpose and Arrangement: This document identifies the Instructions for Continued Airworthiness
for the modification of the above aircraft by installation of a GARMIN
[400 Series unit].
Applicability: Applies to aircraft altered by installation of the GARMIN [400 Series
unit].
Definitions and Abbreviations: None, N/A.
Precautions: None, N/A.
Units of Measurement: None, N/A.
Referenced Publications: GARMIN 400 Series Installation Manual, P/N 190-00140-02
GARMIN 400 Series Maintenance Manual, P/N 190-00140-05
GARMIN STC # [applicable STC number for the specific model
installed, refer to Appendix B of this manual].
GARMIN Sample Flight Manual Supplement, P/N [part number of the
applicable SAFMS, refer to section 3.1 of this manual].
GARMIN [400 Series unit] Pilot’s Guide, P/N [part number of the
applicable Pilot’s Guide].
Distribution: This document should be a permanent aircraft record.
2. Description of the Alteration
Installation of the GARMIN [400 Series unit], with interface to external altitude encoder and CDI
[include other equipment/systems as appropriate]. Refer to section 1.2, and sections 4.x.1 of this
manual for interconnect information. Antenna installation, removal and replacement should be in
accordance with applicable provisions of AC43.13-1B and 43.13-2A.
3. Control, Operation Information
Refer to the [400 Series unit] Pilot’s Guide.
4. Servicing Information
N/A
5. Maintenance Instructions
Maintenance of the [400 Series unit] is ‘on condition’ only. Periodic maintenance is not required.
Refer to the 400 Series Maintenance Manual.
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 420 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info