584000

Garmin GNC 420 Manual

49
Zoom out
Zoom in
Previous page
1/124
Next page
400 SERIES INSTALLATION MANUAL Page 4-13
P/N 190-00140-02 Page Rev L
4.6.2 Serial Data Electrical Characteristics
4.6.2.1 RS-232
Pin Name Connector Pin I/O
GPS RS 232 OUT 1 P4001 56 Out
GPS RS 232 IN 1 P4001 57 In
GPS RS 232 OUT 2 P4001 58 Out
GPS RS 232 IN 2 P4001 59 In
GPS RS 232 OUT 3 P4001 41 Out
GPS RS 232 IN 3 P4001 42 In
GPS RS 232 OUT 4 P4001 54 Out
GPS RS 232 IN 4 P4001 55 In
The RS-232 outputs conform to EIA Standard RS-232C with an output voltage swing of at least ± 5 V
when driving a standard RS-232 load.
4.6.2.2 ARINC 429
Pin Name Connector Pin I/O
GPS ARINC 429 OUT A P4001 46 Out
GPS ARINC 429 OUT B P4001 47 Out
GPS ARINC 429 IN 1 A P4001 48 In
GPS ARINC 429 IN 1 B P4001 49 In
GPS ARINC 429 IN 2 A P4001 50 In
GPS ARINC 429 IN 2 B P4001 51 In
VOR/ILS ARINC 429 OUT A P4006 24 Out
VOR/ILS ARINC 429 OUT B P4006 23 Out
VOR/ILS ARINC 429 IN A P4006 36 In
VOR/ILS ARINC 429 IN B P4006 35 In
The GPS and VOR/ILS ARINC 429 outputs conform to ARINC 429 electrical specifications when loaded
with up to 5 standard ARINC 429 receivers.
4.6.3 Serial Data Configuration
Refer to section 5.2.1 for the main (GPS) ARINC 429 configuration. Refer to sections 5.2.15, 5.2.16, and
5.2.1.7 for the Stormscope configuration. Refer to section 5.2.18 for the Skywatch configuration. Refer to
sections 5.2.18 and 5.2.19 for the TCAD configuration. If the GDL 49 satellite data link transceiver has
been installed, refer to the GDL 49 Installation Manual (190-00231-00) for Configuration Mode
Operations.
4.6.4 Serial Data Calibration and Checkout
Refer to section 5.3.2 for the serial data checkout. Refer to sections 5.2.15, 5.2.16, and 5.2.17 for the
Stormscope checkout. Refer to section 5.2.18 for the Skywatch checkout. Refer to sections 5.2.18 and
5.2.19 for the TCAD checkout.
4.6.5 Serial Data Interconnect
Refer to Figure 4-11 on page 4-41 for the RS-232 serial data interconnect. Refer to Figure 4-12 on page 4-
43 for the ARINC 429 Bendix/King EFS 40/50 interconnect. Refer to Figures 4-13, 4-14 and 4-15 starting
on page 4-45 for the ARINC 429 Sandel EHSI interconnects. Refer to Figure 4-16 on page 4-51 for the
ARINC 429 air data/IRU/AHRS interconnect. Refer to Figure 4-17 on page 4-53 for the ARINC 429
flight control interconnect. Refer to Figure 4-18 on page 4-55 for the Traffic Advisory System
Interconnect. Refer to Figure 4-19 on page 4-57 for the Weather and Terrain Interconnect. Refer to Figure
4-19 on page 4-57 for RS-232 serial data interconnects with the GARMIN GDL 49 Satellite Data Link
Transceiver.
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 420 in the language / languages: English as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info