583732
99
Zoom out
Zoom in
Previous page
1/112
Next page
RAIM not available - The GNC 250 is unable to cross-check its
position using RAIM. You may continue to
navigate using visual flight rules. Your posi-
tion should be verified every 15 minutes
using other navigation sources. If you have
selected a CDI scale other than ‘Auto’, select-
ing a larger CDI scale may remove the condi-
tions causing this message.
RAIM position warn - RAIM has detected position errors. If you
have selected a CDI scale other than ‘Auto’,
selecting a larger CDI scale may remove the
conditions causing this message.
RAM failed - The GNC 250 has detected a failure in its
internal memory. If the message persists, the
GNC 250 is unusable and should be taken to
an authorized GARMIN service center.
Rcvr needs service - The GNC 250 has detected a condition
requiring service in the receiver hardware.
The GNC 250 should be taken to an autho-
rized GARMIN service center.
Ready for navigation - The GNC 250 is ready for navigation.
Received invalid wpt - A waypoint was received in an upload opera-
tion that has an invalid identifier or position.
Receiver failed - The GNC 250 has detected a failure in the
receiver hardware. If the message persists, the
GNC 250 is unusable and should be taken to
an authorized GARMIN service center.
Remote ENT key stuck - The remote ENT key is stuck in the ‘pressed’
state. Check the installation.
Remote XFR key stuck - The remote XFR key is stuck in the ‘pressed’
state. Check the installation.
ROM failed - The GNC 250 has detected a failure in its
permanent memory. If this message occurs,
the unit is unusable and should be taken to
an authorized GARMIN service center.
Route is empty - An attempt has been made to activate an
empty route.
Route is full - An attempt has been made to add more than
31 waypoints to a route. The GNC 250 will
not allow more than 31 waypoints per route.
Route wpt deleted - One or more route waypoints were deleted
while receiving data from the optional PC150
Interface Kit.
Route wpt locked - At least one route waypoint is locked because
the waypoint has been removed from the
Jeppesen NavData®, the data card is missing,
or the data card has failed.
Route wpt moved - One or more route waypoints were moved at
least 0.33 arc minutes due to a database
change.
89
SECTION
D
MESSAGES &
ABBREVIATIONS
250 real 7/14/98 9:33 AM Page 89
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 250 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info