583732

Garmin GNC 250 Manual

70
Zoom out
Zoom in
Previous page
1/112
Next page
Whenever you perform a direct-to, the GNC 250 will set a point-to-point great
circle course to your destination. You can also manually define the magnetic course to
your destination with the GNC 250’s course select feature. The course select feature
is available from the bottom line of the direct-to confirmation page and works like
selecting your desired course on a VOR indicator.
To manually set a course:
1. Press the
D
key. The direct-to confirmation page will appear.
2. Rotate
O
to place the flashing cursor on the course select field.
3. Use
K
to begin entry of the selected course (the
O
and
K
knobs may be used once
you have started editing the course select field).
4. Press
E
to accept the course, and
E
again to acknowledge the ‘ok?’ prompt.
The GNC 250 will now use the selected course for your CDI and DTK steering
guidance. To reset the course to a GPS-calculated course from your present position,
simply press
D
, followed by
E
.
60
APPENDIX A
CDI Scale Settings
The waypoint sequencing field, located at the bot-
tom left of the direct-to confirmation page, allows
you to ‘hold’ on a selected route waypoint and
prevent the GNC 250 from sequencing to the next
route waypoint.
If you have selected the ‘hold’ setting from the
waypoint sequencing field, your selected course
will appear at the bottom left of the CDI page.
You may change your selected course right
from this field by highlighting the course field and
rotating the inner knob. Press ENT to confirm the
course.
Waypoint
Sequencing Field
(see page 69)
Waypoint Identifier Field
Waypoint
Position
Course Select Field
SECTION
5
DIRECT-TO
Manually Selecting
A Course
250 real 7/14/98 9:32 AM Page 60
… 70 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 250 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info