583732

Garmin GNC 250 Manual

69
Zoom out
Zoom in
Previous page
1/112
Next page
The GNC 250’s direct-to function provides a quick method of setting a course to
a destination waypoint. Once a direct-to destination is activated, the GNC 250 will
establish a point-to-point route line along the great circle from your present position
to the destination and provide steering guidance and navigation data to the waypoint
until it is cancelled. If you are navigating to a waypoint and get off course, the direct-
to function may also be used to re-center the d-bar to proceed to the same waypoint.
To select a direct-to destination:
1. Press the
D
key. The CDI page will appear with the destination field flashing.
2. Use
K
and
O
to enter the identifier of the desired waypoint.
3. Press
E
to confirm the identifier, and
E
to accept the direct-to confirmation page.
To re-center the d-bar to the same active-to waypoint:
1. Press the
D
key, followed by
E
twice.
A direct-to may also be quickly activated from many pages that display a single
waypoint identifier (e.g., the nearest airport page) by simply pressing
D
and
E
.
For pages that display a list of waypoints (e.g., the user waypoint list page), you must
highlight the desired waypoint with the flashing cursor before pressing the
D
key.
Once a direct-to is activated, the GNC 250 will provide navigation guidance until the
direct-to is cancelled or the unit is turned off.
To cancel a direct-to destination:
1. Place the flashing cursor over the destination field on the CDI page.
2. Press
\
. The destination field will go blank.
3. Press
E
. The GNC 250 will resume navigating Route 0 (the active route) if available.
59
APPENDIX A
Receiver Status
To quickly select a direct-to from any page
that displays a single waypoint identifier (e.g.,
the nearest airport page), press D, followed
by ENT.
To select a direct-to destination, press the D key
and enter the waypoint identifier.
SECTION
5
DIRECT-TO
Selecting and
Cancelling A Direct-To
250 real 7/14/98 9:32 AM Page 59
… 69 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNC 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNC 250 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info