691441
7
Zoom out
Zoom in
Previous page
1/16
Next page
3
Replace the battery cover, and turn the D-ring clockwise.
Attaching a Lanyard
1
Starting from the back of the remote control, insert the loop of
the lanyard through the slot.
2
Thread the other end of the lanyard through the loop, and
pull it tight.
3
If necessary, place the lanyard around your neck or wrist to
tether it during use.
Remote Control Keys
Key Description
Hold to turn the remote control on and off.
Press to turn on and set the cruise control at the current
speed over ground (SOG) (Maintaining Your Speed,
page 5).
Press to disable the cruise control and return to manual
speed control.
If the propeller is on, press to set it to full speed (Toggling
Full Speed, page 5).
If the propeller is off, press to enable the propeller and set it
to full speed.
Press again to return to the previous speed and propeller
state.
Press for manual control (Steering the Trolling Motor
Manually, page 5).
Hold to steer using gestures (Using Gesture Controls to
Steer, page 6).
Press to turn the propeller on and off (Turning the Propeller
On and Off, page 5).
Key Description
Press to navigate the menu (Navigating the Menu,
page 3).
When in the menu, press to select a menu item, and
press to go back.
When in anchor lock, press to jog the anchor lock position
forward, backward, left, or right in 1.5 m (5 ft.) increments.
When in heading hold or manual control, press and for
single-degree step turns, or hold for steering in five-degree
increments.
Press and for incremental speed changes, or hold for
continuous speed changes.
Press to turn on heading hold (set and maintain the current
heading) (Maintaining Your Heading, page 6).
Press to turn off heading hold, stop the propeller, and
resume manual control.
Hold to set the heading hold by pointing the remote (Using
Gesture Controls to Adjust the Heading Hold, page 6).
Press to turn on anchor lock. Anchor lock uses the trolling
motor to hold your position (Holding Your Position,
page 6).
When in anchor lock, press to turn off anchor lock and
return to the previous steering mode.
Hold to jog the anchor lock position by pointing the remote
(Using Gesture Controls to Adjust Your Held Position,
page 6).
Press to open the menu.
Press to exit the menu.
Press to mark a waypoint.
1 through
4
Press to open the shortcut for the Garmin chartplotter
assigned to the key.
1
Remote Control Screen
Shows the operational status of the trolling motor.
For example, when in manual control, Manual is shown, and
when the heading hold is on, Heading Hold is shown, along with
the heading-hold set point in degrees.
Shows the trolling motor battery status.
Green: the motor battery voltage is good.
Yellow: the motor battery voltage is low.
Red: the motor battery voltage is critically low.
TIP: You can view the remote control battery level by pressing
.
Shows the status of the propeller.
When the propeller icon is shown, the propeller is on. When the
propeller icon is not shown, the propeller is off.
Shows the GPS signal strength of the trolling motor.
PROP Shows the speed level of the propeller (Adjusting the Speed of
the Motor, page 5).
SOG Shows the measured speed over ground (SOG) in the specified
units.
Navigating the Menu
You can use the menu and arrow keys to navigate the menu on
the remote control.
To open the menu, press .
1
Requires a connection to a compatible Garmin chartplotter. See your chartplotter owner's manual for instructions.
Remote Control 3
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Force Trolling Motor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Force Trolling Motor in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Force Trolling Motor

Garmin Force Trolling Motor Installation Guide - German - 8 pages

Garmin Force Trolling Motor User Manual - German - 18 pages

Garmin Force Trolling Motor Installation Guide - Dutch - 8 pages

Garmin Force Trolling Motor User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info