522211
8
Zoom out
Zoom in
Previous page
1/32
Next page
4 Fishfinder 160C Owner’s Manual
INSTALLATION INSTRUCTIONS > TRANSDUCER INSTALLATION
Selecting a Transom Mount Location
For your sonar to operate properly, the transducer has to be located
in clean (non-turbulent) water. The transducer should be mounted as
near the center of the boat as possible.
DO NOT cut the transducer lead, this will void your warranty and
may degrade the sonars operation.
DO NOT mount the transducer behind strakes, rivet lines, struts,
fittings, water intake, discharge ports, eroding paint, or anything
that creates air bubbles or causes the water to become turbulent.
It is important that the transducer be as close to the center line as
possible in calm, non-turbulent water for optimal performance.
Avoid mounting the transducer in locations where the boat may be
supported during launching, hauling, trailering, or storage.
Mount the transducer away from the path of the prop on single drive
boats. On twin drive boats, mount the transducer between the drives
if possible. Do not mount the transducer directly in the path of the
prop. The transducer can cause cavitation that may degrade the
boat’s performance and damage the prop.
Make sure the transducer is below
water level when the boat is on plane
at high speed.
Apply marine sealant to all screw threads to
prevent water from seeping into the transom.
Mount the transducer parallel
with the water line.
Do not mount the transducer behind
strakes, rivet lines, struts, fittings, water
intakes or discharge ports.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Fishfinder160C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Fishfinder160C in the language / languages: English as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info