Manual Garmin BC 40 (page 9 of 14) (English)

691049

Zoom out

Zoom in

1/14

default camera and appears first each time the camera view

appears.

Unpair: Removes the paired camera.

Automatic Activation: Enables the Garmin navigation device to

display the default camera view automatically each time the

navigation device is turned on. If the navigation device is

connected to an ignition-switched power outlet, this feature

allows you to view the backup camera automatically when

you start your vehicle.

Video Resolution: Allows you to set the quality of the camera

video. Higher resolution settings provide a more detailed

image but use more battery power.

NOTE: This setting is not available for all navigation device

product models.

Aligning the Guidance Lines

For the best reference, the guidance lines should be aligned to

reflect the outside edges of the vehicle. You should align the

guidance lines separately for each backup camera. When you

change the camera angle, you should immediately align the

guidance lines again.

Position your vehicle with the driver's side closely aligned to a

curb, driveway, or parking stall lines.

TIP: It can be helpful to position the vehicle in the center of a

parking stall, and then pull forward into the next stall. This

allows you to use the parking stall lines at the rear of the

vehicle as reference points for alignment.

From the paired Garmin navigation device, select Settings >

Wireless Camera.

Select the paired camera name, and select Guidance Lines

> Adjust Guidance Lines.

Use the arrows in the corners of the screen to move the ends

of the white, driver's-side guidance line.

The guidance line should appear directly on top of the curb,

driveway, or parking stall line.

Use the arrows in the center of the screen to move the

colored distance guidance lines up or down.

The red guidance line should be aligned with the rearmost

part of your vehicle. This could be the rear bumper, a trailer

hitch, or another object protruding from the rear of the

vehicle.

Reposition the vehicle with the passenger side closely

aligned to a curb, driveway, or parking stall lines, and use the

arrows to align the white, passenger-side guidance line.

The guidance lines should be symmetrical.

Changing the Camera Order

You can change the order in which cameras appear when you

switch cameras.

Select Settings > Wireless Camera.

Select a camera.

Select Set Default Camera.

A list of paired cameras appears.

Drag each camera to the desired location in the list.

When you switch cameras from the camera view, the

cameras appear in the listed order, from top to bottom. The

camera at the top of the list is the default camera and

appears first each time the camera view appears.

Renaming a Camera

You can change the name that appears above a camera in the

camera view. You should use a descriptive name that clearly

identifies the location of the camera.

Select Settings > Wireless Camera.

Select a camera.

Select Rename.

Removing a Paired Camera

You can pair up to 4 wireless cameras with a compatible Garmin

navigation device. If you have already paired the maximum

number of cameras, you must unpair one before you can pair

another one.

From a paired Garmin navigation device, select Settings >

Wireless Camera.

Select a camera.

Select Unpair.

Device Information

Software Updates

Software updates for your camera are received automatically

from the paired Garmin navigation device. You should update

your Garmin navigation device software regularly to keep both it

and the camera up to date. For more information about updating

software, see the owner's manual for your Garmin navigator.

Updating the Camera Software

Before you can update the camera software, you must pair the

camera with a compatible Garmin navigation device (Pairing the

Camera with a Garmin Navigation Device, page 3).

On the paired Garmin navigation device, select an option:

• Connect to a Wi‑Fi

network, and select Settings >

Updates > Install All.

• Install all available updates using the Garmin Express

™

application.

See the owner's manual for your Garmin navigation device

for more information.

The navigation device downloads updates for itself and updates

for your BC 40 camera, if available. The next time the device

connects to your camera, it sends the update to the camera

automatically. A message and progress indicator appear on the

navigation device screen while the camera is updating. It takes

about one minute to install the camera update.

Checking the Camera Software Version

Before you can check the camera software version, you must

pair the camera with a compatible Garmin navigation device

(Pairing the Camera with a Garmin Navigation Device, page 3).

On the paired Garmin navigation device, select Settings >

Device > About.

The device displays version information for all software on

the device.

Locate the camera name in the list.

The software version number appears next to the camera

name.

Device Information 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin BC 40 in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin BC 40

Garmin BC 40 User Manual - German - 14 pages

Garmin BC 40 User Manual - Dutch - 14 pages

Garmin BC 40 User Manual - French - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin BC 40 Manual

Product: